portHotKeyPrefix
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.5.1.1.23
Object
column
r/w
Hex8
The prefix that a user types to lock a line or redraw the Menu. The default value is hex 01, which corresponds to Ctrl-a (^a) (hex value 02 would be Ctrl-b (^b), etc.): ^a l-(Lowercase L) Locks the line until the user unlocks it. The user is prompted for a password (any password, excluding spaces) and locks the line. Next, the user must retype the password to unlock the line. ^r-When you switch from a session back to the Menu, the screen may not be redrawn correctly. If this happens, use this command to redraw it properly. You can use the Hotkey Prefix key to lock a line only when the Line Lock parameter is On.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.5.1.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portEntry
- Table
- portTable
- Siblings
- 38
Syntax
Hex8
- Source
- Hex8
- Base type
OctetString
Values & Constraints
Type Constraints
range: 1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIndex Serial Port Index. Valid values are 1 to maximum port number the
Device Server supports | column | PortNumber | .1.3.6.1.4.1.1966.12.1.5.1.1.1 |
| portPreDefinedUser For DSLogin line service, makes this a line that is dedicated
to the specified user. Only this user will be able to log in
on this line and they won't need to enter their login
na… | column | OctetString | .1.3.6.1.4.1.1966.12.1.5.1.1.10 |
| portDSPort The Device Server port number. | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.11 |
| portIdleTimer Enter a time period, in seconds, for which the Idle Timer will run.
Use this timer to close a connection because of inactivity. When the
Idle Timer expires, the Device Server will… | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.12 |
| portSessionTimer Enter a time, in seconds, for which the Session Timer will run. Use this
timer to forcibly close the session (connection). When the Session Timer
expires, the Device Server will e… | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.13 |
| portSecurity Enables/disables login/password authentication, locally or externally,
on reverse Telnet connections. The default is Off. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.14 |
| portBreak Specifies how a break is interpreted:
None-The Device Server ignores the break key completely and
it is not passed through to the host. This is the default setting.
Local-The D… | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.1.1.15 |
| portInboundFlowControl Determines if input flow control is to be used.
Default is On. This is active only when Line Flow Control
is set to Soft, Hard, or Both. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.16 |
| portOutboundFlowControl Determines if output flow control is to be used.
Default is On. This is active only when Line Flow Control
is set to Soft, Hard, or Both. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.17 |
| portInitialMode Specifies the initial interface a user navigates when logging
into the line; either the Menu or a prompt for the CLI.
The default is CLI. | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.1.1.18 |
| portReset Resets the terminal type connected to the line when a user logs out. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.19 |
| portStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.12.1.5.1.1.2 |
| portKeepalive Enables a per-connection TCP keepalive feature; after approximately
3 minutes of network connection idle time, the connection will send
a gratuitous ACK to the network peer, eithe… | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.20 |
| portMapCR Maps carriage returns (CR) to carriage return line feed (CRLF).
The default value is Off. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.21 |
| portMOTD Enables/disables the message of the day on the line. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.22 |
| portLock When enabled, the user can lock his terminal with a password using the
Hotkey Prefix (default Ctrl-a) ^a l (lowercase L). The Device Server
prompts the user for a password and a c… | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.24 |
| portEnable Is the Port Enabled. This field is not available on 1-port units. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.25 |
| portMultiSession The number of Multisessions allowed on this port | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.26 |
| portDialRetries The number of Dial Retries. | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.27 |
| portDialTimeout The timeout value when dialing in seconds. | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.28 |
| portInternetAddress The Internet address of this port. | column | Ipv4v6Address | .1.3.6.1.4.1.1966.12.1.5.1.1.29 |
| portName Provide a name for the line so it can be easily identified. | column | OctetString | .1.3.6.1.4.1.1966.12.1.5.1.1.3 |
| portRawOption Defines the multihost Service and direct connection initiate mode | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.1.1.30 |
| portDirectTrigger Defines the direct connection initiate char | column | Hex8 | .1.3.6.1.4.1.1966.12.1.5.1.1.31 |
| portDataLogging When on, serial data will be buffered if the TCP connection is lost.
When the TCP connection is re-established, the buffered serial data will
be sent to its destination (this op… | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.32 |
| portSacSupport When on, a user can access SAC (the interface of the Microsoft
Emergency Management Systems utility) through EasyPort Web when the device server's
serial port is connected to a … | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.33 |
| portSendName Send the port name on connect. Applies to direct raw, silent raw,
and TruePort (server-initiated) srevice types. | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.1.1.34 |
| portConnectInitiateString String to be sent when connection is initiated. | column | OctetString | .1.3.6.1.4.1.1966.12.1.5.1.1.35 |
| portConnectTerminateString String to be sent when connection is terminated. | column | OctetString | .1.3.6.1.4.1.1966.12.1.5.1.1.36 |
| portConnectStringDelay The delay after sending the connect or terminate string, in milliseconds | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.37 |
| portBreakLength Amount of time, in milliseconds, to send a break signal (tunnel service only) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.38 |
| portBreakDelay The delay, in milliseconds, after sending a break signal (tunnel service only) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.39 |
| portService Defines the Line Service, which determines how the
line will be used. USB ports can only be configured to
reverseraw(4),reversessh(11),,reversetelnet(8),
bidirectionalmodem(5), t… | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.1.1.4 |
| portDial Determines how a modem will work on the line. If your user
is remote and will be dialing in via modem or ISDN TA, set
this parameter to In; if the Device Server is being used as
a… | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.1.1.5 |
| portModem The name of the predefined modem that is used on this line. | column | OctetString | .1.3.6.1.4.1.1966.12.1.5.1.1.6 |
| portPhone The phone number to use when Dial is set to Out. | column | OctetString | .1.3.6.1.4.1.1966.12.1.5.1.1.7 |
| portTermType Specifies the type of terminal connected to the line:
Dumb, WYSE60, VT100, ANSI, TVI925, IBM3151TE,
VT320 (specifically supporting VT320-7),
HP700 (specifically supporting HP700/4… | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.1.1.8 |
| portPages For DSLogin line service, this is the number of video
pages the terminal supports. Valid values are 1-7.
The default is 5 pages. | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.1.1.9 |