portSlipStatus
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.5.6.1.2
Object
column
r/w
ContainerStatus
When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.5.6.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portSLIPEntry
- Table
- portSLIPTable
- Siblings
- 7
Syntax
ContainerStatus
- Source
- ContainerStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | active |
2 | modified |
4 | applyChanges |
6 | discardChanges |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portSLIPIndex portSLIPIndex | column | PortNumber | .1.3.6.1.4.1.1966.12.1.5.6.1.1 |
| portSLIPLocalIpAddress The IPv4 address of the Device Server end of the SLIP
link. For routing to work you must enter an IP address
in this field. Choose an address that is part of the same
network or s… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.5.6.1.3 |
| portSLIPRemoteIpAddress The IPv4 address of the remote end of the SLIP link. Choose
an address that is part of the same network or subnetwork as
the Device Server. If your user is authenticated by the De… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.5.6.1.4 |
| portSLIPSubnetBits The number of bits in the subnet mask. For example,
a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.
If your user is authenticated by RADIUS and the RADIUS
parameter Framed… | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.6.1.5 |
| portSLIPMtu The Maximum Transmission Unit (MTU) parameter restricts
the size of individual SLIP packets being sent by the
Device Server. Enter a value between 256 and 1006 bytes;
for example,… | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.6.1.6 |
| portSLIPVJComp This determines whether Van Jacobson compression is used
on this link; that is, whether you are using SLIP or
C-SLIP (compressed SLIP). The choices are On (C-SLIP) or
Off (SLIP). … | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.6.1.7 |
| portSLIPRouting Determines the routing mode (RIP, Routing Information Protocol)
used on the SLIP interface as one of the following options:
None-Disables RIP over the PPP/SLIP interface.
Send-Sen… | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.6.1.8 |