ioDigitalCfgStatus
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2
Object
column
r/w
ContainerStatus
When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ioDigitalCfgEntry
- Table
- ioDigitalCfgTable
- Siblings
- 19
Syntax
ContainerStatus
- Source
- ContainerStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | active |
2 | modified |
4 | applyChanges |
6 | discardChanges |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ioDigitalChannelIndex I/O digital channel resource index | column | GenericTableIndex | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.1 |
| ioDigitalInputCfgAlarmEmail Digital Input: Enable/disable email alert on triggered alarm | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.10 |
| ioDigitalInputCfgAlarmSyslog Digital Input: Enable/disable syslog alert on triggered alarm | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.11 |
| ioDigitalInputCfgAlarmSNMP Digital Input: Enable/disable SNMP trap on triggered alarm | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.12 |
| ioDigitalOutputCfgType Digital Output: Output type | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.13 |
| ioDigitalOutputCfgMode Digital Output: Output mode | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.14 |
| ioDigitalOutputCfgPulseMode Digital Output: Pulse mode (counted or continuous) | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.15 |
| ioDigitalOutputCfgPulseCount Digital Output: Pulse count (only applies to counted pulse mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.16 |
| ioDigitalOutputCfgInactiveSignalWidth Digital Output: Inactive signal width, in 100 ms units (only applies
to pulse mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.17 |
| ioDigitalOutputCfgActiveSignalWidth Digital Output: Active signal width, in 100 ms units (only applies
to pulse mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.18 |
| ioDigitalOutputCfgDelay Digital Output: Delay time, in 100 ms units (only applies to
delay mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.19 |
| ioDigitalOutputCfgFailsafe Digital Output: Failsafe action - choose the action that
will take place when the failsafe timer expires | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20 |
| ioDigitalCfgResourceType Set your digital I/O resource type to Input or Output
using this object. Please note that the corresponding
hardware jumpers must be set accordingly. | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.3 |
| ioDigitalCfgEnable Enable/disable this digital I/O channel | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.4 |
| ioDigitalCfgDescription Description for this digital I/O | column | OctetString | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.5 |
| ioDigitalInputCfgLatch Digital Input: Latch type | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.6 |
| ioDigitalInputCfgInvertSignal Digital Input: Enable/disable signal inversion | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.7 |
| ioDigitalInputCfgAlarmTrigger Digital Input: Alarm trigger type | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.8 |
| ioDigitalInputCfgAlarmClear Digital Input: Clear alarm - manual/automatic | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.9 |