portSLIPMtu
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.5.6.1.6
Object
column
r/w
Integer32
The Maximum Transmission Unit (MTU) parameter restricts the size of individual SLIP packets being sent by the Device Server. Enter a value between 256 and 1006 bytes; for example, 512. The default value is 256. If your user is authenticated by the Device Server, this MTU value will be overridden when you have set a Framed MTU value for the user. If your user is authenticated by RADIUS and the RADIUS parameter Framed-MTU is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.5.6.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portSLIPEntry
- Table
- portSLIPTable
- Siblings
- 7
Syntax
Integer32
Values & Constraints
Object Constraints
range: 256-1006
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portSLIPIndex portSLIPIndex | column | PortNumber | .1.3.6.1.4.1.1966.12.1.5.6.1.1 |
| portSlipStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.12.1.5.6.1.2 |
| portSLIPLocalIpAddress The IPv4 address of the Device Server end of the SLIP
link. For routing to work you must enter an IP address
in this field. Choose an address that is part of the same
network or s… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.5.6.1.3 |
| portSLIPRemoteIpAddress The IPv4 address of the remote end of the SLIP link. Choose
an address that is part of the same network or subnetwork as
the Device Server. If your user is authenticated by the De… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.5.6.1.4 |
| portSLIPSubnetBits The number of bits in the subnet mask. For example,
a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.
If your user is authenticated by RADIUS and the RADIUS
parameter Framed… | column | Integer32 | .1.3.6.1.4.1.1966.12.1.5.6.1.5 |
| portSLIPVJComp This determines whether Van Jacobson compression is used
on this link; that is, whether you are using SLIP or
C-SLIP (compressed SLIP). The choices are On (C-SLIP) or
Off (SLIP). … | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.5.6.1.7 |
| portSLIPRouting Determines the routing mode (RIP, Routing Information Protocol)
used on the SLIP interface as one of the following options:
None-Disables RIP over the PPP/SLIP interface.
Send-Sen… | column | Enumeration | .1.3.6.1.4.1.1966.12.1.5.6.1.8 |