ioDigitalOutputCfgFailsafe
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20
Object
column
r/w
Enumeration
Digital Output: Failsafe action - choose the action that will take place when the failsafe timer expires
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ioDigitalCfgEntry
- Table
- ioDigitalCfgTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | activateOutput |
3 | deactivateOutput |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ioDigitalChannelIndex I/O digital channel resource index | column | GenericTableIndex | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.1 |
| ioDigitalInputCfgAlarmEmail Digital Input: Enable/disable email alert on triggered alarm | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.10 |
| ioDigitalInputCfgAlarmSyslog Digital Input: Enable/disable syslog alert on triggered alarm | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.11 |
| ioDigitalInputCfgAlarmSNMP Digital Input: Enable/disable SNMP trap on triggered alarm | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.12 |
| ioDigitalOutputCfgType Digital Output: Output type | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.13 |
| ioDigitalOutputCfgMode Digital Output: Output mode | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.14 |
| ioDigitalOutputCfgPulseMode Digital Output: Pulse mode (counted or continuous) | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.15 |
| ioDigitalOutputCfgPulseCount Digital Output: Pulse count (only applies to counted pulse mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.16 |
| ioDigitalOutputCfgInactiveSignalWidth Digital Output: Inactive signal width, in 100 ms units (only applies
to pulse mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.17 |
| ioDigitalOutputCfgActiveSignalWidth Digital Output: Active signal width, in 100 ms units (only applies
to pulse mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.18 |
| ioDigitalOutputCfgDelay Digital Output: Delay time, in 100 ms units (only applies to
delay mode) | column | Integer32 | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.19 |
| ioDigitalCfgStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2 |
| ioDigitalCfgResourceType Set your digital I/O resource type to Input or Output
using this object. Please note that the corresponding
hardware jumpers must be set accordingly. | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.3 |
| ioDigitalCfgEnable Enable/disable this digital I/O channel | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.4 |
| ioDigitalCfgDescription Description for this digital I/O | column | OctetString | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.5 |
| ioDigitalInputCfgLatch Digital Input: Latch type | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.6 |
| ioDigitalInputCfgInvertSignal Digital Input: Enable/disable signal inversion | column | OnOffValue | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.7 |
| ioDigitalInputCfgAlarmTrigger Digital Input: Alarm trigger type | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.8 |
| ioDigitalInputCfgAlarmClear Digital Input: Clear alarm - manual/automatic | column | Enumeration | .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.9 |