JNX-OPT-IF-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
17
Rows
17
Columns
183
jnxoptIfOPSmConfigTable
table.1.3.6.1.4.1.2636.3.73.1.3.1.1
·
1 row entry
·
3 columns
A table of OPS General config parameters.
An conceptual row of OPS General config parameters.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOPSmDirectionality
Indicates the directionality of the entity.
|
JNX-OPT-IF-MIBJnxoptIfDirectionality Textual Convention: JNX-OPT-IF-MIBJnxoptIfDirectionality EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.1.1.1.1 |
||||||||||||
|
jnxoptIfOPSmFiberTypeRecommendation
Fiber type as per fibre types are chosen from those defined in
ITU-T Recs G.652, G.653, G.654, G.655, G.656 and G.657. |
JnxoptIfFiberTypeRecommendation Textual Convention: JnxoptIfFiberTypeRecommendation EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.1.1.1.2 |
||||||||||||
|
jnxoptIfOPSmFiberTypeCategory
Fiber type as per fibre types are chosen from those defined in
ITU-T Recs G.652, G.653, and G.655. The categories are A, B, C, D and E. |
JnxoptIfFiberTypeCategory Textual Convention: JnxoptIfFiberTypeCategory EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.1.1.1.3 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1
·
1 row entry
·
14 columns
A table of Och General config extension parameters
A conceptual row that contains OCh configuration extension
information of an interface.
information of an interface.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOChMiminumChannelSpacing
A minimum nominal difference in frequency (GHz) between two adjacent
channels. |
JnxoptIfChannelSpacing Textual Convention: JnxoptIfChannelSpacing EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.1 |
||||||||||||||
|
jnxoptIfOChBitRateLineCoding
Optical tributary signal class
NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s) NRZ 10G (nominally 2.4 Gbit/s to nominally 10.71 Gbit/s) |
JnxoptIfBitRateLineCoding Textual Convention: JnxoptIfBitRateLineCoding EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.2 |
||||||||||||||
|
jnxoptIfOChFEC
This parameter indicates what Forward Error Correction (FEC) code
is used at Source and Sink. GFEC (from G709) and the I.x EFEC's (G.975 - Table I.1 super FEC). 1 - No FEC 2 - GFEC 3 - I.2 EFEC 4 - I.3 EFEC 5 … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.3 |
||||||||||||||
|
jnxoptIfOChSinkMaximumBERMantissa
This parameter indicate the maximum Bit(mantissa) error rate can be
supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4 |
||||||||||||||
|
jnxoptIfOChSinkMaximumBERExponent
This parameter indicate the maximum Bit(exponent) error rate can be
supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.5 |
||||||||||||||
|
jnxoptIfOChMinWavelength
This parameter indicate minimum wavelength spectrum in a
definite wavelength Band (L, C and S) |
0.01 nmSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.6 |
||||||||||||||
|
jnxoptIfOChMaxWavelength
This parameter indicate maximum wavelength spectrum in a
definite wavelength Band (L, C and S) |
0.01 nmSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.7 |
||||||||||||||
|
jnxoptIfOChWavelength
This parameter indicates the wavelength value.
|
0.01 nmSNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.8 |
||||||||||||||
|
jnxoptIfOChVendorTransceiverClass
As defined in G.698
Vendors can summarize a set of parameters in a single proprietary parameter: the Class of transceiver. The Transceiver classification will be based on the Vendor Name and the main TX and RX paramete… |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.9 |
||||||||||||||
|
jnxoptIfOChOpticalInterfaceApplicationCode
This parameter indicates the transceiver application code at Ss
and Rs as defined in [ITU.G698.2] Chapter 5.3 |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.10 |
||||||||||||||
|
jnxoptIfOChLaserAdminState
The configured State of the laser:
0 - disabled 1 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.11 |
||||||||||||||
|
jnxoptIfOChLaserOperationalState
The Operational Status of Laser:
0 - disabled 1 - Enabled 2 - fault 3 - degraded |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.12 |
||||||||||||||
|
jnxoptIfOChAdminState
The Administrative Status of an Interface:
0 - Out of Service 1 - In Service |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.13 |
||||||||||||||
|
jnxoptIfOChOperationalState
The Operational Status of an Interface:
0 - disabled 1 - enabled 2 - Fault 3 - Degraded |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.2.1.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2
·
1 row entry
·
6 columns
A configuration table of OCh Src (Ss) parameters.
A conceptual row that contains the Src (Ss) configuration
parameters for a given interface.
parameters for a given interface.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
jnxoptIfOChMinimumMeanChannelOutputPower
The minimum mean launched power at Ss is the average power (in dbm)
of a pseudo-random data sequence coupled into the DWDM link. |
0.01 dbmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.1 |
|
jnxoptIfOChMaximumMeanChannelOutputPower
The maximum mean launched power at Ss is the average power (in dbm)
of a pseudo-random data sequence coupled into the DWDM link. |
0.01 dbmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.2 |
|
jnxoptIfOChMinimumCentralFrequency
The minimum central frequency is the nominal single-channel frequency
(in THz) on which the digital coded information of the particular optical channel is modulated by use of the NRZ line code. Eg 191.5THz will be repre… |
0.01 THzSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.3 |
|
jnxoptIfOChMaximumCentralFrequency
The maximum central frequency is the nominal single-channel frequency
(in THz) on which the digital coded information of the particular optical channel is modulated by use of the NRZ line code. Eg 191.5THz will be repre… |
0.01 THzSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.4 |
|
jnxoptIfOChMaximumSpectralExcursion
This is the maximum acceptable difference between the nominal
central frequency (in GHz) of the channel and the minus 15 dB points of the transmitter spectrum furthest from the nominal central frequency measured at poin… |
0.1 GHzSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.5 |
|
jnxoptIfOChMaximumTxDispersionOSNRPenalty
Defines a reference receiver that this penalty is measured with.
Lowest OSNR at Ss with worst case (residual) dispersion minus the Lowest OSNR at Ss with no dispersion. Lowest OSNR at Ss with no dispersion |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.2.1.6 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3
·
1 row entry
·
9 columns
A table of paramters for the optical path from Src to Sink (Ss to Rs).
A conceptual row that contains the optical path Src-Sink (Ss-Rs)
configuration parameters for a given interface.
configuration parameters for a given interface.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
jnxoptIfOChSrcSinkMinimumChromaticDispersion
These parameters define the minimum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate. |
ps/nmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.1 |
|
jnxoptIfOChSrcSinkMaximumChromaticDispersion
These parameters define the maximum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the system shall be able to tolerate. |
ps/nmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.2 |
|
jnxoptIfOChSrcSinkMinimumSrcOpticalReturnLoss
These parameter defines minimum optical return loss (in dB) of the
cable plant at the source reference point (Src/Ss), including any connectors. |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.3 |
|
jnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSink
Optical reflectance is defined to be the ratio of the reflected
optical power pre.sent at a point, to the optical power incident to that point. Control of reflections is discussed extensively in ITU-T Rec. G.957. |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.4 |
|
jnxoptIfOChSrcSinkMaximumDifferentialGroupDelay
Differential group delay (DGD) is the time difference between the
fractions of a pulse that are transmitted in the two principal states of polarization of an optical signal. For distances greater than several kilometre… |
psSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.5 |
|
jnxoptIfOChSrcSinkMaximumPolarisationDependentLoss
The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of pol… |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.6 |
|
jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk
Inter-channel crosstalk is defined as the ratio of total power in
all of the disturbing channels to that in the wanted channel, where the wanted and disturbing channels are at different wavelengths. The parameter speci… |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 |
|
jnxoptIfOChSrcSinkInterFerometricCrosstalk
This parameter places a requirement on the isolation of a link
conforming to the 'black-link' approach such that under the worst case operating conditions the interferometric crosstalk at any reference point RS is less … |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8 |
|
jnxoptIfOChSrcSinkOpticalPathOSNRPenalty
The optical path OSNR penalty is defined as the difference between
the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER requirement. |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.9 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4
·
1 row entry
·
4 columns
A table of OCh Sink (Rs) configuration parameters.
A conceptual row that contains the Sink (Rs) configuration
parameters for a given interface.
parameters for a given interface.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
jnxoptIfOChSinkMinimumMeanIntputPower
The minimum values of the average received power (in dbm
at point the Sink (Rs). |
0.01 dbmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.1 |
|
jnxoptIfOChSinkMaximumMeanIntputPower
The maximum values of the average received power (in dbm)
at point the Sink (Rs). |
0.01 dbmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.2 |
|
jnxoptIfOChSinkMinimumOSNR
The minimum optical signal-to-noise ratio (OSNR) is the minimum
value of the ratio of the signal power in the wanted channel to the highest noise power density in the range of the central frequency plus and minus the ma… |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.3 |
|
jnxoptIfOChSinkOSNRTolerance
The receiver OSNR tolerance is defined as the minimum value of
OSNR at point Sink (Rs) that can be tolerated while maintaining the maximum BER of the application. Sink (Rs). |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.2.4.1.4 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1
·
1 row entry
·
3 columns
A table of OCh sink etxension to the performance monitoring information for the current 15-minute interval.
A conceptual row that contains OCh sink performance
monitoring information for an interface for the current
15-minute interval.
monitoring information for an interface for the current
15-minute interval.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
jnxoptIfOChSinkCurrentChromaticDispersion
Residual Chromatic Dispersion measured at Rx Transceiver port.
|
ps/nmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1.1.1 |
|
jnxoptIfOChSinkCurrentOSNR
Current Optical Signal to Noise Ratio (OSNR) estimated at Rx
Transceiver port . |
0.1 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1.1.2 |
|
jnxoptIfOChSinkCurrentQ
'Q' factor estimated at Rx Transceiver port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.1.1.3 |
jnxoptIfOTNPMConfigTable
table.1.3.6.1.4.1.2636.3.73.1.3.3.2
·
1 row entry
·
21 columns
A table of performance monitoring configuration for the type 'jnxoptIfOTNPMConfigLayer' layer.
A conceptual entry in the performance monitoring configuration
for the type 'jnxoptIfOTNPMConfigLayer' layer.
for the type 'jnxoptIfOTNPMConfigLayer' layer.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMConfigType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.1 |
||||||
|
jnxoptIfOTNPMConfigLayer
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a com… |
JnxoptIfOTNLayer Textual Convention: JnxoptIfOTNLayer EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.2 |
||||||
|
jnxoptIfOTNPMConfigTCMLevel
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.3 |
||||||
|
jnxoptIfOTNPMESRInterval
This parameter indicates the measurement interval
for error seconds ratio. |
secondsUnsigned32r/w Constraints: range: 1-96 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.4 |
||||||
|
jnxoptIfOTNPMSESRInterval
This parameter indicates the measurement interval
for severely error seconds ratio. |
secondsSNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.5 |
||||||
|
jnxoptIfOTNPMValidIntervals
The number of contiguous 15 minute intervals for which valid
PM data is available for the particular interface. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.6 |
||||||
|
jnxoptIfOTNPM15MinBip8Threshold
The number of Bip8 encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be sent per interval … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.7 |
||||||
|
jnxoptIfOTNPM15MinESsThreshold
The number of ES encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshEsTCA. One notification will be sent per interval per … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.8 |
||||||
|
jnxoptIfOTNPM15MinSESsThreshold
The number of SES encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshSESTCA. One notification will be sent per interval pe… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.9 |
||||||
|
jnxoptIfOTNPM15MinUASsThreshold
The number of UAS encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshUASTCA. One notification will be sent per interval pe… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.10 |
||||||
|
jnxoptIfOTNPM15MinBBEsThreshold
The number of UAS encountered by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBBETCA. One notification will be sent per interval pe… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.11 |
||||||
|
jnxoptIfOTNPM24HourBip8Threshold
The number of Bip8 encountered by the interface within any
given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be sent per interval per… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.12 |
||||||
|
jnxoptIfOTNPM24HourESsThreshold
The number of ES encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshEsTCA. One notification will be sent per 24 hour per int… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.13 |
||||||
|
jnxoptIfOTNPM24HourSESsThreshold
The number of SES encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshSESsTCA. One notification will be sent per 24 hour per … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.14 |
||||||
|
jnxoptIfOTNPM24HourUASsThreshold
The number of SES encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshUASsTCA. One notification will be sent per 24 hour per … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.15 |
||||||
|
jnxoptIfOTNPM24HourBBEsThreshold
The number of BBE encountered by the interface within any
given 24 hour performance data collection period, which causes the SNMP agent to send jnxoptIf24HourThreshBBEsTCA. One notification will be sent per 24 hour per … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.16 |
||||||
|
jnxoptIfOTNPMBip8EnableTCA
Enable TCA's - 15minute and 24hr for Bip8
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.17 |
||||||
|
jnxoptIfOTNPMESsEnableTCA
Enable TCA's - 15minute and 24hr for ESs
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.18 |
||||||
|
jnxoptIfOTNPMSESsEnableTCA
Enable TCA's - 15minute and 24hr for SESs
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.19 |
||||||
|
jnxoptIfOTNPMUASsEnableTCA
Enable TCA's - 15minute and 24hr for UASs
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.20 |
||||||
|
jnxoptIfOTNPMBBEsEnableTCA
Enable TCA's - 15minute and 24hr for BBEs
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.2.1.21 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3
·
1 row entry
·
14 columns
A table for the Performance monitoring Current Table.
A conceptual entry in the Near end or Far End performance monitoring
Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer.
Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMCurrentType
This parameter indicates the parameters for the table are for the Near
End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.1 |
||||||
|
jnxoptIfOTNPMCurrentLayer
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk (OCh which is used for the black link) 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link… |
JnxoptIfOTNLayer Textual Convention: JnxoptIfOTNLayer EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.2 |
||||||
|
jnxoptIfOTNPMCurrentTCMLevel
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.3 |
||||||
|
jnxoptIfOTNPMCurrentSuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.4 |
||||||
|
jnxoptIfOTNPMCurrentBip8
Number of Failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.5 |
||||||
|
jnxoptIfOTNPMCurrentESs
This is the number of seconds in which one or more bits are in
error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.6 |
||||||
|
jnxoptIfOTNPMCurrentSESs
The number of seconds which have a severe error.
This is the number of seconds in which the bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7 |
||||||
|
jnxoptIfOTNPMCurrentUASs
It is the number of unavailable seconds.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new period of available time … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.8 |
||||||
|
jnxoptIfOTNPMCurrentBBEs
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.9 |
||||||
|
jnxoptIfOTNPMCurrentESR
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.10 |
||||||
|
jnxoptIfOTNPMCurrentSESR
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.11 |
||||||
|
jnxoptIfOTNPMCurrentBBER
The ratio of BER in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.12 |
||||||
|
jnxoptIfOTNPMCurrentElapsedTime
Time elapsed for this 15 minute interval
|
secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.13 |
||||||
|
jnxoptIfOTNPMCurSuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4
·
1 row entry
·
15 columns
A Performance monitoring Interval Table.
A conceptual entry in the Near end or Far End performance monitoring
Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer.
Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer.
Indexes
IF-MIBifIndex jnxoptIfOTNPMIntervalType jnxoptIfOTNPMIntervalLayer jnxoptIfOTNPMIntervalTCMLevel jnxoptIfOTNPMIntervalNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMIntervalType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1 |
||||||
|
jnxoptIfOTNPMIntervalLayer
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a co… |
JnxoptIfOTNLayer Textual Convention: JnxoptIfOTNLayer EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2 |
||||||
|
jnxoptIfOTNPMIntervalTCMLevel
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3 |
||||||
|
jnxoptIfOTNPMIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. |
Unsigned32 Constraints: range: 1-96 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4 |
||||||
|
jnxoptIfOTNPMIntervalSuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5 |
||||||
|
jnxoptIfOTNPMIntervalBip8
Number of Failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6 |
||||||
|
jnxoptIfOTNPMIntervalESs
It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7 |
||||||
|
jnxoptIfOTNPMIntervalSESs
The number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8 |
||||||
|
jnxoptIfOTNPMIntervalUASs
It is the number of unavailable seconds in this 15 minute interval.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A ne… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9 |
||||||
|
jnxoptIfOTNPMIntervalBBEs
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10 |
||||||
|
jnxoptIfOTNPMIntervalESR
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11 |
||||||
|
jnxoptIfOTNPMIntervalSESR
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12 |
||||||
|
jnxoptIfOTNPMIntervalBBER
The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13 |
||||||
|
jnxoptIfOTNPMIntervalTimeStamp
Time stamp of this interval.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14 |
||||||
|
jnxoptIfOTNPMIntSuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5
·
1 row entry
·
14 columns
A Performance monitoring Current Day Table.
A conceptual entry in the Near end or Far End performance
monitoring Current day table for the type
'jnxoptIfOTNPMCurrentDayLayer' layer.
monitoring Current day table for the type
'jnxoptIfOTNPMCurrentDayLayer' layer.
Indexes
IF-MIBifIndex jnxoptIfOTNPMCurrentDayType jnxoptIfOTNPMCurrentDayLayer jnxoptIfOTNPMCurrentDayTCMLevel
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMCurrentDayType
This parameter indicates the parameters for the table are for
the Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.1 |
||||||
|
jnxoptIfOTNPMCurrentDayLayer
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a com… |
JnxoptIfOTNLayer Textual Convention: JnxoptIfOTNLayer EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.2 |
||||||
|
jnxoptIfOTNPMCurrentDayTCMLevel
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.3 |
||||||
|
jnxoptIfOTNPMCurrentDaySuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.4 |
||||||
|
jnxoptIfOTNPMCurrentDayBip8
Number of Failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.5 |
||||||
|
jnxoptIfOTNPMCurrentDayESs
The number of seconds which have an error.
It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.6 |
||||||
|
jnxoptIfOTNPMCurrentDaySESs
The number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.7 |
||||||
|
jnxoptIfOTNPMCurrentDayUASs
It is the number of unavailable seconds in the cunrrent day.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new perio… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.8 |
||||||
|
jnxoptIfOTNPMCurrentDayBBEs
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.9 |
||||||
|
jnxoptIfOTNPMCurrentDayESR
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.10 |
||||||
|
jnxoptIfOTNPMCurrentDaySESR
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.11 |
||||||
|
jnxoptIfOTNPMCurrentDayBBER
The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.12 |
||||||
|
jnxoptIfOTNPMCurrentDayElapsedTime
Time elapsed for current day
|
secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13 |
||||||
|
jnxoptIfOTNPMCurDaySuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more inter… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6
·
1 row entry
·
14 columns
A Performance monitoring Previous Day Table.
A conceptual entry in the Near end or Far End performance
monitoring previous day table for the type
'jnxoptIfOTNPMPrevDayLayer' layer.
monitoring previous day table for the type
'jnxoptIfOTNPMPrevDayLayer' layer.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMPrevDayType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.1 |
||||||
|
jnxoptIfOTNPMPrevDayLayer
This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black link PM management, but since this is a com… |
JnxoptIfOTNLayer Textual Convention: JnxoptIfOTNLayer EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.2 |
||||||
|
jnxoptIfOTNPMPrevDayTCMLevel
This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. |
Unsigned32 Constraints: range: 0-6 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.3 |
||||||
|
jnxoptIfOTNPMPrevDaySuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.4 |
||||||
|
jnxoptIfOTNPMPrevDayBip8
Number of pre FEC failures occurred in an observation period.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.5 |
||||||
|
jnxoptIfOTNPMPrevDayESs
The number of seconds which have an error.
It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.6 |
||||||
|
jnxoptIfOTNPMPrevDaySESs
The number of seconds which have a severe error.
A severely errored second, is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detec… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.7 |
||||||
|
jnxoptIfOTNPMPrevDayUASs
It is the number of unavailable seconds in the previous day.
A period of unavailable time begins at the onset of ten consecutive SES events. These ten seconds are considered to be part of unavailable time. A new perio… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.8 |
||||||
|
jnxoptIfOTNPMPrevDayBBEs
An errored block not occurring as part of an SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.9 |
||||||
|
jnxoptIfOTNPMPrevDayESR
The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.10 |
||||||
|
jnxoptIfOTNPMPrevDaySESR
The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.11 |
||||||
|
jnxoptIfOTNPMPrevDayBBER
The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. |
.001SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.12 |
||||||
|
jnxoptIfOTNPMPrevDayTimeStamp
Time stamp of this interval.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.13 |
||||||
|
jnxoptIfOTNPMPrevDaySuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - on… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7
·
1 row entry
·
7 columns
A table of performance monitoring FEC configuration.
A conceptual entry in the performance monitoring FEC configuration
layer.
layer.
Indexes
IF-MIBifIndex jnxoptIfOTNPMFECConfigType
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMFECConfigType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.1 |
||||
|
jnxoptIfOTNPMFECValidIntervals
The number of contiguous 15 minute intervals for which valid FEC
PM data is available for the particular interface. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.2 |
||||
|
jnxoptIfOTNPM15MinPreFECBERMantissaThreshold
BER (mantissa) by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interfa… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.3 |
||||
|
jnxoptIfOTNPM15MinPreFECBERExponentThreshold
The Pre FEC BER (exponent) by the interface within any
given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.4 |
||||
|
jnxoptIfOTNPM24HourPreFECBERMantissaThreshold
BER (mantissa) by the interface within any
given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.5 |
||||
|
jnxoptIfOTNPM24HourPreFECBERExponentThreshold
The Pre FEC BER (exponent) by the interface within any
given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.6 |
||||
|
jnxoptIfOTNPMFECBEREnableTCA
Enable TCA's - 15minute and 24hr for FEC BER
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.7.1.7 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8
·
1 row entry
·
14 columns
A Performance monitoring FEC Current Table.
A conceptual entry in the Near end or Far End performance
monitoring FEC current table.
monitoring FEC current table.
Indexes
IF-MIBifIndex jnxoptIfOTNPMFECCurrentType
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMFECCurrentType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.1 |
||||
|
jnxoptIfOTNPMFECCurrentSuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.2 |
||||
|
jnxoptIfOTNPMCurrentFECCorrectedErr
The number of bits corrected by the FEC are counted in the
interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.3 |
||||
|
jnxoptIfOTNPMCurrentFECUncorrectedWords
The number of un-corrected words by the FEC are counted over the
interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.4 |
||||
|
jnxoptIfOTNPMCurrentFECBERMantissa
The number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.5 |
||||
|
jnxoptIfOTNPMCurrentFECBERExponent
The number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.6 |
||||
|
jnxoptIfOTNPMCurrentFECMinBERMantissa
The minimum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.7 |
||||
|
jnxoptIfOTNPMCurrentFECMinBERExponent
The minimum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.8 |
||||
|
jnxoptIfOTNPMCurrentFECMaxBERMantissa
The maximum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.9 |
||||
|
jnxoptIfOTNPMCurrentFECMaxBERExponent
The maximum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.10 |
||||
|
jnxoptIfOTNPMCurrentFECAvgBERMantissa
The average number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.11 |
||||
|
jnxoptIfOTNPMCurrentFECAvgBERExponent
The average number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.12 |
||||
|
jnxoptIfOTNPMCurrentFECElapsedTime
Time elapsed for this 15 minute interval.
|
secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.13 |
||||
|
jnxoptIfOTNPMFECCurSuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.14 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9
·
1 row entry
·
13 columns
A Performance monitoring FEC Interval Table.
A conceptual entry in the Near end or Far End performance
monitoring FEC interval table.
monitoring FEC interval table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMFECIntervalType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.1 |
||||
|
jnxoptIfOTNPMFECIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.2 |
||||
|
jnxoptIfOTNPMFECIntervalSuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.3 |
||||
|
jnxoptIfOTNPMIntervalFECCorrectedErr
The number of bits corrected by the FEC are counted in the
interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.4 |
||||
|
jnxoptIfOTNPMIntervalFECUncorrectedWords
The number of words un-corrected words by the FEC are counted over
the interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.5 |
||||
|
jnxoptIfOTNPMIntervalMinFECBERMantissa
The minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.6 |
||||
|
jnxoptIfOTNPMIntervalMinFECBERExponent
The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.7 |
||||
|
jnxoptIfOTNPMIntervalMaxFECBERMantissa
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.8 |
||||
|
jnxoptIfOTNPMIntervalMaxFECBERExponent
The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.9 |
||||
|
jnxoptIfOTNPMIntervalAvgFECBERMantissa
The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.10 |
||||
|
jnxoptIfOTNPMIntervalAvgFECBERExponent
The average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.11 |
||||
|
jnxoptIfOTNPMFECIntervalTimeStamp
Time stamp of this interval.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.12 |
||||
|
jnxoptIfOTNPMFECIntSuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.9.1.13 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10
·
1 row entry
·
12 columns
A Performance monitoring FEC current day table.
A conceptual entry in the Near end or Far End performance
monitoring FEC current day table.
monitoring FEC current day table.
Indexes
IF-MIBifIndex jnxoptIfOTNPMFECCurrentDayType
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMFECCurrentDayType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.1 |
||||
|
jnxoptIfOTNPMFECCurrentDaySuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.2 |
||||
|
jnxoptIfOTNPMCurrentDayFECCorrectedErr
The number of bits corrected by the FEC are counted in the
interval. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.3 |
||||
|
jnxoptIfOTNPMCurrentDayFECUncorrectedWords
The number of words un-corrected by the FEC are counted over the
Day. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.4 |
||||
|
jnxoptIfOTNPMCurrentDayMinFECBERMantissa
The minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.5 |
||||
|
jnxoptIfOTNPMCurrentDayMinFECBERExponent
The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.6 |
||||
|
jnxoptIfOTNPMCurrentDayMaxFECBERMantissa
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.7 |
||||
|
jnxoptIfOTNPMCurrentDayMaxFECBERExponent
The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.8 |
||||
|
jnxoptIfOTNPMCurrentDayAvgFECBERMantissa
The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.9 |
||||
|
jnxoptIfOTNPMCurrentDayAvgFECBERExponent
The average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.10 |
||||
|
jnxoptIfOTNPMFECCurrentDayElapsedTime
Time elapsed for current day.
|
secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.11 |
||||
|
jnxoptIfOTNPMFECCurDaySuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - on… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.10.1.12 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11
·
1 row entry
·
12 columns
A Performance monitoring FEC previous day table.
A conceptual entry in the Near end or Far End performance
monitoring FEC previous day table.
monitoring FEC previous day table.
Indexes
IF-MIBifIndex jnxoptIfOTNPMFECPrevDayType
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
jnxoptIfOTNPMFECPrevDayType
This parameter indicates the parameters for the table are for the
Near End or Far End performance data. 1 - Near End 2 - Far End |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1 |
||||
|
jnxoptIfOTNPMFECPrevDaySuspectedFlag
If true, the data in this entry may be unreliable.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.2 |
||||
|
jnxoptIfOTNPMPrevDayFECCorrectedErr
The number of bits corrected by the FEC are counted in the
previous day. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.3 |
||||
|
jnxoptIfOTNPMPrevDayFECUncorrectedWords
The number of un-corrected words by the FEC are counted over the
previous Day. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.4 |
||||
|
jnxoptIfOTNPMPrevDayMinFECBERMantissa
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.5 |
||||
|
jnxoptIfOTNPMPrevDayMinFECBERExponent
The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.6 |
||||
|
jnxoptIfOTNPMPrevDayMaxFECBERMantissa
The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period (mantissa). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.7 |
||||
|
jnxoptIfOTNPMPrevDayMaxFECBERExponent
The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previous 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.8 |
||||
|
jnxoptIfOTNPMPrevDayAvgFECBERMantissa
The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 24hour period (mantissa). |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.9 |
||||
|
jnxoptIfOTNPMPrevDayAvgFECBERExponent
The average bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the previous 24hour period. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.10 |
||||
|
jnxoptIfOTNPMFECPrevDayTimeStamp
Time stamp for the Prev day.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.11 |
||||
|
jnxoptIfOTNPMFECPrevDaySuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - on… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1.12 |
jnxoptIfOTNAlarmTable
table.1.3.6.1.4.1.2636.3.73.1.3.4.1
·
1 row entry
·
8 columns
A table of alarm entries.
A conceptual entry in the alarm table.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
jnxoptIfOTNAlarmLocation
The object identifies indicates if this entry was for
Near end/Far end. |
JnxoptIfOTNType Textual Convention: JnxoptIfOTNType EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNAlarmDirection
The object identifies indicates if this entry was for
for the Tx/Rx or both. |
JnxoptIfOTNDirection Textual Convention: JnxoptIfOTNDirection EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNAlarmLayer
This specifies which sublayer this alarm is for.
|
JnxoptIfOTNLayer Textual Convention: JnxoptIfOTNLayer EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNAlarmTCMLevel
TCM level 1-6 of the alarm. It will be 0 if alarm sublayer is
OCh, OTUk or ODUk. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNOChOTUkAlarmType
This specifies the type of alarm of the sublayer
'jnxoptIfOTNAlarmLayer' for OCh/OTUk . |
JnxoptIfOTNOChAlarms Textual Convention: JnxoptIfOTNOChAlarms EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNAlarmSeverity
The object identifies the severity of the last alarm/alert
that most recently was set or cleared. |
JnxoptIfOTNAlarmSeverity Textual Convention: JnxoptIfOTNAlarmSeverity EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNAlarmDate
This specifies the date and time when this alarm occurred.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
jnxoptIfOTNODUkTcmAlarmType
This specifies the type of alarm of the sublayer
'jnxoptIfOTNAlarmLayer' for ODUk/TCM . |
JnxoptIfOTNODUkTcmAlarms Textual Convention: JnxoptIfOTNODUkTcmAlarms EnumerationType Values:
|
.1.3.6.1.4.1.2636.3.73.1.3.4.1.1.8 |