jnxoptIfOChSrcSinkInterFerometricCrosstalk
JNX-OPT-IF-EXT-MIB ·
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8
Object
This parameter places a requirement on the isolation of a link conforming to the 'black-link' approach such that under the worst case operating conditions the interferometric crosstalk at any reference point RS is less than the maximum interferometric crosstalk value..
Context
- MIB
- JNX-OPT-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.1 dB
- Parent
- jnxoptIfOChSrcSinkConfigEntry
- Table
- jnxoptIfOChSrcSinkConfigTable
- Siblings
- 8
Syntax
0.1 dB SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOChSrcSinkMinimumChromaticDispersion These parameters define the minimum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the
system shall be able to tolerate. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.1 |
| jnxoptIfOChSrcSinkMaximumChromaticDispersion These parameters define the maximum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the
system shall be able to tolerate. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.2 |
| jnxoptIfOChSrcSinkMinimumSrcOpticalReturnLoss These parameter defines minimum optical return loss (in dB) of the
cable plant at the source reference point (Src/Ss), including any
connectors. | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.3 |
| jnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSink Optical reflectance is defined to be the ratio of the reflected
optical power pre.sent at a point, to the optical power incident to
that point. Control of reflections is discusse… | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.4 |
| jnxoptIfOChSrcSinkMaximumDifferentialGroupDelay Differential group delay (DGD) is the time difference between the
fractions of a pulse that are transmitted in the two principal
states of polarization of an optical signal. For … | column | ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.5 |
| jnxoptIfOChSrcSinkMaximumPolarisationDependentLoss The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to R… | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.6 |
| jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk Inter-channel crosstalk is defined as the ratio of total power in
all of the disturbing channels to that in the wanted channel,
where the wanted and disturbing channels are at dif… | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 |
| jnxoptIfOChSrcSinkOpticalPathOSNRPenalty The optical path OSNR penalty is defined as the difference between
the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER
requirement. | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.9 |