jnxoptIfOTNPMFECPrevDayEntry
JNX-OPT-IF-EXT-MIB ·
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1
Object
row
A conceptual entry in the Near end or Far End performance monitoring FEC previous day table.
Context
- MIB
- JNX-OPT-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.3.3.11.1- Type
- row
- Status
- current
- Parent
- jnxoptIfOTNPMFECPrevDayTable
- Table
- jnxoptIfOTNPMFECPrevDayTable
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOTNPMFECPrevDayType This parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End | column | JnxoptIfOTNType | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1 |
| jnxoptIfOTNPMPrevDayAvgFECBERExponent The average bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the average Pre FEC BER during the previous 24hour period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.10 |
| jnxoptIfOTNPMFECPrevDayTimeStamp Time stamp for the Prev day. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.11 |
| jnxoptIfOTNPMFECPrevDaySuspectReason If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.12 |
| jnxoptIfOTNPMFECPrevDaySuspectedFlag If true, the data in this entry may be unreliable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.2 |
| jnxoptIfOTNPMPrevDayFECCorrectedErr The number of bits corrected by the FEC are counted in the
previous day. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.3 |
| jnxoptIfOTNPMPrevDayFECUncorrectedWords The number of un-corrected words by the FEC are counted over the
previous Day. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.4 |
| jnxoptIfOTNPMPrevDayMinFECBERMantissa The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.5 |
| jnxoptIfOTNPMPrevDayMinFECBERExponent The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the previous 24hour period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.6 |
| jnxoptIfOTNPMPrevDayMaxFECBERMantissa The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period (mantissa). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.7 |
| jnxoptIfOTNPMPrevDayMaxFECBERExponent The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the maximum Pre FEC BER in the previous 24hour period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.8 |
| jnxoptIfOTNPMPrevDayAvgFECBERMantissa The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER during the previous 24hour period (mantis… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| jnxoptIfOTNPMFECPrevDayType This parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End | column | JnxoptIfOTNType | .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1 |