jnxoptIfOTNPMPrevDaySuspectReason
JNX-OPT-IF-EXT-MIB ·
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14
Object
column
SNMPv2-SMIInteger32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild
Context
- MIB
- JNX-OPT-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxoptIfOTNPMPrevDayEntry
- Table
- jnxoptIfOTNPMPrevDayTable
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOTNPMPrevDayType This parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End | column | JnxoptIfOTNType | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.1 |
| jnxoptIfOTNPMPrevDayESR The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.10 |
| jnxoptIfOTNPMPrevDaySESR The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.11 |
| jnxoptIfOTNPMPrevDayBBER The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.12 |
| jnxoptIfOTNPMPrevDayTimeStamp Time stamp of this interval. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.13 |
| jnxoptIfOTNPMPrevDayLayer This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black lin… | column | JnxoptIfOTNLayer | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.2 |
| jnxoptIfOTNPMPrevDayTCMLevel This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.3 |
| jnxoptIfOTNPMPrevDaySuspectedFlag If true, the data in this entry may be unreliable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.4 |
| jnxoptIfOTNPMPrevDayBip8 Number of pre FEC failures occurred in an observation period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.5 |
| jnxoptIfOTNPMPrevDayESs The number of seconds which have an error.
It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal
(AIS) i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.6 |
| jnxoptIfOTNPMPrevDaySESs The number of seconds which have a severe error.
A severely errored second, is a one-second period which has
a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS)
o… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.7 |
| jnxoptIfOTNPMPrevDayUASs It is the number of unavailable seconds in the previous day.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to b… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.8 |
| jnxoptIfOTNPMPrevDayBBEs An errored block not occurring as part of an SES. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.9 |