jnxoptIfOTNPMCurrentDayElapsedTime
JNX-OPT-IF-EXT-MIB ·
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13
Object
Time elapsed for current day
Context
- MIB
- JNX-OPT-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- jnxoptIfOTNPMCurrentDayEntry
- Table
- jnxoptIfOTNPMCurrentDayTable
- Siblings
- 13
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOTNPMCurrentDayType This parameter indicates the parameters for the table are for
the Near End or Far End performance data.
1 - Near End
2 - Far End | column | JnxoptIfOTNType | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.1 |
| jnxoptIfOTNPMCurrentDayESR The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.10 |
| jnxoptIfOTNPMCurrentDaySESR The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.11 |
| jnxoptIfOTNPMCurrentDayBBER The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.12 |
| jnxoptIfOTNPMCurDaySuspectReason If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by use… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.14 |
| jnxoptIfOTNPMCurrentDayLayer This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black lin… | column | JnxoptIfOTNLayer | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.2 |
| jnxoptIfOTNPMCurrentDayTCMLevel This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.3 |
| jnxoptIfOTNPMCurrentDaySuspectedFlag If true, the data in this entry may be unreliable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.4 |
| jnxoptIfOTNPMCurrentDayBip8 Number of Failures occurred in an observation period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.5 |
| jnxoptIfOTNPMCurrentDayESs The number of seconds which have an error.
It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal
(AIS) i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.6 |
| jnxoptIfOTNPMCurrentDaySESs The number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio =
1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
Indication Signa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.7 |
| jnxoptIfOTNPMCurrentDayUASs It is the number of unavailable seconds in the cunrrent day.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to b… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.8 |
| jnxoptIfOTNPMCurrentDayBBEs An errored block not occurring as part of an SES. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.9 |