jnxoptIfOTNPMCurrentSESs
JNX-OPT-IF-EXT-MIB ·
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7
Object
column
SNMPv2-SMIUnsigned32
The number of seconds which have a severe error. This is the number of seconds in which the bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
Context
- MIB
- JNX-OPT-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxoptIfOTNPMCurrentEntry
- Table
- jnxoptIfOTNPMCurrentTable
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOTNPMCurrentType This parameter indicates the parameters for the table are for the Near
End or Far End performance data.
1 - Near End
2 - Far End | column | JnxoptIfOTNType | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.1 |
| jnxoptIfOTNPMCurrentESR The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.10 |
| jnxoptIfOTNPMCurrentSESR The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.11 |
| jnxoptIfOTNPMCurrentBBER The ratio of BER in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.12 |
| jnxoptIfOTNPMCurrentElapsedTime Time elapsed for this 15 minute interval | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.13 |
| jnxoptIfOTNPMCurSuspectReason If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by use… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.14 |
| jnxoptIfOTNPMCurrentLayer This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk (OCh which is used for the black link)
2 - ODUk
3 - TCM
The ODUk/TCM subl… | column | JnxoptIfOTNLayer | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.2 |
| jnxoptIfOTNPMCurrentTCMLevel This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.3 |
| jnxoptIfOTNPMCurrentSuspectedFlag If true, the data in this entry may be unreliable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.4 |
| jnxoptIfOTNPMCurrentBip8 Number of Failures occurred in an observation period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.5 |
| jnxoptIfOTNPMCurrentESs This is the number of seconds in which one or more bits are in
error or during which Loss of Signal (LOS) or Alarm Indication
Signal (AIS) is detected. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.6 |
| jnxoptIfOTNPMCurrentUASs It is the number of unavailable seconds.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to be
part of unavailabl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.8 |
| jnxoptIfOTNPMCurrentBBEs An errored block not occurring as part of an SES. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.9 |