jnxoptIfOTNPMIntervalUASs

JNX-OPT-IF-EXT-MIB · .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
It is the number of unavailable seconds in this 15 minute interval.
A period of unavailable time begins at the onset of ten
consecutive SES events.  These ten seconds are considered to be
part of unavailable time.  A new period of available time begins
at the onset of ten consecutive non-SES events.  These ten seconds
are considered to be part of available time.

Context

MIB
JNX-OPT-IF-EXT-MIB
OID
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9
Type
column
Access
readonly
Status
current
Parent
jnxoptIfOTNPMIntervalEntry
Table
jnxoptIfOTNPMIntervalTable
Siblings
14

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxoptIfOTNPMIntervalType
This parameter indicates the parameters for the table are for the Near End or Far End performance data. 1 - Near End 2 - Far End
columnJnxoptIfOTNType.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1
jnxoptIfOTNPMIntervalBBEs
An errored block not occurring as part of an SES.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10
jnxoptIfOTNPMIntervalESR
The ratio of ES in available time to total seconds in available time during a fixed measurement interval.
column.001 SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11
jnxoptIfOTNPMIntervalSESR
The ratio of SES in available time to total seconds in available time during a fixed measurement interval.
column.001 SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12
jnxoptIfOTNPMIntervalBBER
The ratio of BBE in available time to total seconds in available time during a fixed measurement interval.
column.001 SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13
jnxoptIfOTNPMIntervalTimeStamp
Time stamp of this interval.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14
jnxoptIfOTNPMIntSuspectReason
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by use…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15
jnxoptIfOTNPMIntervalLayer
This parameter indicates the parameters for the table are for OTUk, ODUk, TCMn performance data. 1 - OTUk 2 - ODUk 3 - TCM The ODUk/TCM sublayer PM is not related to the black li…
columnJnxoptIfOTNLayer.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2
jnxoptIfOTNPMIntervalTCMLevel
This parameter indicates the TCM level (1-6) if the PM is of the type TCM. This will be 0 for OTUK/ODUK.
columnUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3
jnxoptIfOTNPMIntervalNumber
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
columnUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4
jnxoptIfOTNPMIntervalSuspectedFlag
If true, the data in this entry may be unreliable.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5
jnxoptIfOTNPMIntervalBip8
Number of Failures occurred in an observation period.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6
jnxoptIfOTNPMIntervalESs
It is a one-second period in which one or more bits are in error or during which Loss of Signal (LOS) or Alarm Indication Signal (AIS) is detected.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7
jnxoptIfOTNPMIntervalSESs
The number of seconds which have a severe error. It is a one-second period which has a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS) or Alarm Indication Signa…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8