jnxoptIfOTNPMIntervalNumber
JNX-OPT-IF-EXT-MIB ·
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4
Object
column
Unsigned32
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
Context
- MIB
- JNX-OPT-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- jnxoptIfOTNPMIntervalEntry
- Table
- jnxoptIfOTNPMIntervalTable
- Siblings
- 14
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-96
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOTNPMIntervalType This parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End | column | JnxoptIfOTNType | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1 |
| jnxoptIfOTNPMIntervalBBEs An errored block not occurring as part of an SES. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10 |
| jnxoptIfOTNPMIntervalESR The ratio of ES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11 |
| jnxoptIfOTNPMIntervalSESR The ratio of SES in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12 |
| jnxoptIfOTNPMIntervalBBER The ratio of BBE in available time to total seconds in available
time during a fixed measurement interval. | column | .001 SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13 |
| jnxoptIfOTNPMIntervalTimeStamp Time stamp of this interval. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14 |
| jnxoptIfOTNPMIntSuspectReason If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by use… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15 |
| jnxoptIfOTNPMIntervalLayer This parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black li… | column | JnxoptIfOTNLayer | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2 |
| jnxoptIfOTNPMIntervalTCMLevel This parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3 |
| jnxoptIfOTNPMIntervalSuspectedFlag If true, the data in this entry may be unreliable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5 |
| jnxoptIfOTNPMIntervalBip8 Number of Failures occurred in an observation period. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6 |
| jnxoptIfOTNPMIntervalESs It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal
(AIS) is detected. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7 |
| jnxoptIfOTNPMIntervalSESs The number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio =
1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
Indication Signa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8 |
| jnxoptIfOTNPMIntervalUASs It is the number of unavailable seconds in this 15 minute interval.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are consider… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9 |