EFM-CU-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
11
Rows
11
Columns
72
efmCuPortConfTable
table.1.3.6.1.2.1.167.1.1.1
·
1 row entry
·
8 columns
Table for Configuration of EFMCu 2BASE-TL/10PASS-TS (PCS) Ports. Entries in this table MUST be maintained in a persistent manner.
An entry in the EFMCu Port Configuration table.
Each entry represents an EFMCu port indexed by the ifIndex.
Note that an EFMCu PCS port runs on top of a single
or multiple PME port(s), which are also indexed by ifIndex.
Each entry represents an EFMCu port indexed by the ifIndex.
Note that an EFMCu PCS port runs on top of a single
or multiple PME port(s), which are also indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
efmCuPAFAdminState
Administrative (desired) state of the PAF of the EFMCu port
(PCS). When 'disabled', PME aggregation will not be performed by the PCS. No more than a single PME can be assigned to this PCS in this case. When 'enabled', … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.1.1.1.1 |
||||
|
efmCuPAFDiscoveryCode
PAF Discovery Code of the EFMCu port (PCS).
A unique 6-octet code used by the Discovery function, when PAF is supported. PCS ports incapable of supporting PAF SHALL return a zero-length octet string on an attempt to rea… |
OctetStringr/w Constraints: range: 0-0range: 6-6 |
.1.3.6.1.2.1.167.1.1.1.1.2 |
||||
|
efmCuAdminProfile
Desired configuration profile(s), common for all PMEs in the
EFMCu port. This object is a list of pointers to entries in either efmCuPme2BProfileTable or efmCuPme10PProfileTable, depending on the current operating SubT… |
EfmProfileIndexListr/w Textual Convention: EfmProfileIndexList OctetStringType Constraints: range: 0..6 |
.1.3.6.1.2.1.167.1.1.1.1.3 |
||||
|
efmCuTargetDataRate
Desired EFMCu port 'net' (as seen across MII) Data Rate in
Kbps, to be achieved during initialization, under spectral restrictions placed on each PME via efmCuAdminProfile or efmCuPmeAdminProfile, with th… |
KbpsUnsigned32r/w Constraints: range: 999999-999999range: 1-100000 |
.1.3.6.1.2.1.167.1.1.1.1.4 |
||||
|
efmCuTargetSnrMgn
Desired EFMCu port SNR margin to be achieved on all PMEs
assigned to the port, during initialization. (The SNR margin is the difference between the desired SNR and the actual SNR). Note tha… |
dBUnsigned32r/w Constraints: range: 0-21 |
.1.3.6.1.2.1.167.1.1.1.1.5 |
||||
|
efmCuAdaptiveSpectra
Indicates how to utilize excess capacity when the copper
environment allows a higher total data rate to be achieved than that specified by the efmCuTargetDataRate. A value of true(1) indicates that the ex… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.1.1.1.6 |
||||
|
efmCuThreshLowRate
This object configures the EFMCu port low-rate crossing alarm
threshold. When the current value of ifSpeed for this port reaches/drops below or exceeds this threshold, an efmCuLowRateCrossing notification MAY be genera… |
KbpsUnsigned32r/w Constraints: range: 1-100000 |
.1.3.6.1.2.1.167.1.1.1.1.7 |
||||
|
efmCuLowRateCrossingEnable
Indicates whether efmCuLowRateCrossing notifications should
be generated for this interface. A value of true(1) indicates that efmCuLowRateCrossing notification is enabled. A value of false(2) indicates … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.1.1.1.8 |
efmCuPortCapabilityTable
table.1.3.6.1.2.1.167.1.1.2
·
1 row entry
·
4 columns
Table for Capabilities of EFMCu 2BASE-TL/10PASS-TS (PCS) Ports. Entries in this table MUST be maintained in a persistent manner
An entry in the EFMCu Port Capability table.
Each entry represents an EFMCu port indexed by the ifIndex.
Note that an EFMCu PCS port runs on top of a single
or multiple PME port(s), which are also indexed by ifIndex.
Each entry represents an EFMCu port indexed by the ifIndex.
Note that an EFMCu PCS port runs on top of a single
or multiple PME port(s), which are also indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
efmCuPAFSupported
PME Aggregation Function (PAF) capability of the EFMCu port
(PCS). This object has a value of true(1) when the PCS can perform PME aggregation on the available PMEs. Ports incapable of PAF SHALL return a value of false(… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.1.2.1.1 |
||||||
|
efmCuPeerPAFSupported
PME Aggregation Function (PAF) capability of the EFMCu port
(PCS) link partner. This object has a value of true(1) when the remote PCS can perform PME aggregation on its available PMEs. Ports whose peers are incapable o… |
EfmTruthValueOrUnknown Textual Convention: EfmTruthValueOrUnknown EnumerationType Values:
|
.1.3.6.1.2.1.167.1.1.2.1.2 |
||||||
|
efmCuPAFCapacity
Number of PMEs that can be aggregated by the local PAF.
The number of PMEs currently assigned to a particular EFMCu port (efmCuNumPMEs) is never greater than efmCuPAFCapacity. This object maps to the Clau… |
Unsigned32 Constraints: range: 1-32 |
.1.3.6.1.2.1.167.1.1.2.1.3 |
||||||
|
efmCuPeerPAFCapacity
Number of PMEs that can be aggregated by the PAF of the peer
PHY (PCS port). A value of 0 is returned when peer PAF capacity is unknown (peer cannot be reached). This object maps to the Clause 30 attribut… |
Unsigned32 Constraints: range: 0-32 |
.1.3.6.1.2.1.167.1.1.2.1.4 |
efmCuPortStatusTable
table.1.3.6.1.2.1.167.1.1.3
·
1 row entry
·
11 columns
This table provides overall status information of EFMCu
2BASE-TL/10PASS-TS ports, complementing the generic status
information from the ifTable of IF-MIB and ifMauTable of
MAU-MIB. Additional status information about connected PMEs
is available from the efmCuPmeStatusTable.
This table contains live data from the equipment. As such,
it is NOT persistent.
An entry in the EFMCu Port Status table.
Each entry represents an EFMCu port indexed by the ifIndex.
Note that an EFMCu PCS port runs on top of a single
or multiple PME port(s), which are also indexed by ifIndex.
Each entry represents an EFMCu port indexed by the ifIndex.
Note that an EFMCu PCS port runs on top of a single
or multiple PME port(s), which are also indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuFltStatus
EFMCu (PCS) port Fault Status. This is a bitmap of possible
conditions. The various bit positions are: noPeer - the peer PHY cannot be reached (e.g., no PMEs attached, all PMEs a… |
Bits Enumerated Values:
|
.1.3.6.1.2.1.167.1.1.3.1.1 |
||||||||
|
efmCuPortSide
EFM port mode of operation (subtype).
The value of 'subscriber' indicates that the port is designated as '-R' subtype (all PMEs assigned to this port are of subtype '-R'). The value of the 'office' indica… |
Enumeration Enumerated Values:
|
.1.3.6.1.2.1.167.1.1.3.1.2 |
||||||||
|
efmCuNumPMEs
The number of PMEs that is currently aggregated by the local
PAF (assigned to the EFMCu port using the ifStackTable). This number is never greater than efmCuPAFCapacity. This object SHALL be automatically… |
Unsigned32 Constraints: range: 0-32 |
.1.3.6.1.2.1.167.1.1.3.1.3 |
||||||||
|
efmCuPAFInErrors
The number of fragments that have been received across the
gamma interface with RxErr asserted and discarded. This read-only counter is inactive (not incremented) when the PAF is unsupported or disabled. Upon disabling… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.4 |
||||||||
|
efmCuPAFInSmallFragments
The number of fragments smaller than minFragmentSize
(64 bytes) that have been received across the gamma interface and discarded. This read-only counter is inactive when the PAF is unsupported or disabled. Upon disabli… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.5 |
||||||||
|
efmCuPAFInLargeFragments
The number of fragments larger than maxFragmentSize
(512 bytes) that have been received across the gamma interface and discarded. This read-only counter is inactive when the PAF is unsupported or disabled. Upon disabli… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.6 |
||||||||
|
efmCuPAFInBadFragments
The number of fragments that do not fit into the sequence
expected by the frame assembly function and that have been received across the gamma interface and discarded (the frame buffer is flushed to the next valid frame… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.7 |
||||||||
|
efmCuPAFInLostFragments
The number of gaps in the sequence of fragments that have
been received across the gamma interface (the frame buffer is flushed to the next valid frame start, when fragment/fragments expected by the frame assembly funct… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.8 |
||||||||
|
efmCuPAFInLostStarts
The number of missing StartOfPacket indicators expected by
the frame assembly function. This read-only counter is inactive when the PAF is unsupported or disabled. Upon disabling the PAF, the counter retains its previo… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.9 |
||||||||
|
efmCuPAFInLostEnds
The number of missing EndOfPacket indicators expected by the
frame assembly function. This read-only counter is inactive when the PAF is unsupported or disabled. Upon disabling the PAF, the counter retains its previous… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.10 |
||||||||
|
efmCuPAFInOverflows
The number of fragments, received across the gamma interface
and discarded, which would have caused the frame assembly buffer to overflow. This read-only counter is inactive when the PAF is unsupported or disabled. Upo… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.1.3.1.11 |
efmCuPmeConfTable
table.1.3.6.1.2.1.167.1.2.1
·
1 row entry
·
10 columns
Table for Configuration of common aspects for EFMCu
2BASE-TL/10PASS-TS PME ports (modems). Configuration of
aspects specific to 2BASE-TL or 10PASS-TS PME types is
represented in efmCuPme2BConfTable and efmCuPme10PConfTable,
respectively.
Entries in this table MUST be maintained in a persistent
manner.
An entry in the EFMCu PME Configuration table.
Each entry represents common aspects of an EFMCu PME port
indexed by the ifIndex. Note that an EFMCu PME port can be
stacked below a single PCS port, also indexed by ifInd…
Each entry represents common aspects of an EFMCu PME port
indexed by the ifIndex. Note that an EFMCu PME port can be
stacked below a single PCS port, also indexed by ifInd…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPmeAdminSubType
Administrative (desired) subtype of the PME.
Possible values are: ieee2BaseTLO - PME SHALL operate as 2BaseTL-O ieee2BaseTLR - PME SHALL operate as 2BaseTL-R ieee10PassTSO - PME SHALL … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.1.1.1 |
||||||||||||||
|
efmCuPmeAdminProfile
Desired PME configuration profile. This object is a pointer
to an entry in either the efmCuPme2BProfileTable or the efmCuPme10PProfileTable, depending on the current operating SubType of the PME. The value of this obj… |
EfmProfileIndexOrZeror/w Textual Convention: EfmProfileIndexOrZero Unsigned32Type Constraints: range: 0..255 |
.1.3.6.1.2.1.167.1.2.1.1.2 |
||||||||||||||
|
efmCuPAFRemoteDiscoveryCode
PAF Remote Discovery Code of the PME port at the CO.
The 6-octet Discovery Code of the peer PCS connected via the PME. Reading this object results in a Discovery Get operation. Setting this object to all zeroes results … |
OctetStringr/w Constraints: range: 6-6range: 0-0 |
.1.3.6.1.2.1.167.1.2.1.1.3 |
||||||||||||||
|
efmCuPmeThreshLineAtn
Desired Line Attenuation threshold for the 2B/10P PME.
This object configures the line attenuation alarm threshold. When the current value of Line Attenuation reaches or exceeds this threshold, an efmCuPmeLineAtnCrossin… |
dBInteger32r/w Constraints: range: -127-128 |
.1.3.6.1.2.1.167.1.2.1.1.4 |
||||||||||||||
|
efmCuPmeThreshSnrMgn
Desired SNR margin threshold for the 2B/10P PME.
This object configures the SNR margin alarm threshold. When the current value of SNR margin reaches or exceeds this threshold, an efmCuPmeSnrMgnCrossing notification MAY … |
dBInteger32r/w Constraints: range: -127-128 |
.1.3.6.1.2.1.167.1.2.1.1.5 |
||||||||||||||
|
efmCuPmeLineAtnCrossingEnable
Indicates whether efmCuPmeLineAtnCrossing notifications
should be generated for this interface. A value of true(1) indicates that efmCuPmeLineAtnCrossing notification is enabled. A value of false(2) indi… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.1.1.6 |
||||||||||||||
|
efmCuPmeSnrMgnCrossingEnable
Indicates whether efmCuPmeSnrMgnCrossing notifications
should be generated for this interface. A value of true(1) indicates that efmCuPmeSnrMgnCrossing notification is enabled. A value of false(2) indica… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.1.1.7 |
||||||||||||||
|
efmCuPmeDeviceFaultEnable
Indicates whether efmCuPmeDeviceFault notifications
should be generated for this interface. A value of true(1) indicates that efmCuPmeDeviceFault notification is enabled. A value of false(… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.1.1.8 |
||||||||||||||
|
efmCuPmeConfigInitFailEnable
Indicates whether efmCuPmeConfigInitFailure notifications
should be generated for this interface. A value of true(1) indicates that efmCuPmeConfigInitFailure notification is enabled. A value of false(2) … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.1.1.9 |
||||||||||||||
|
efmCuPmeProtocolInitFailEnable
Indicates whether efmCuPmeProtocolInitFailure notifications
should be generated for this interface. A value of true(1) indicates that efmCuPmeProtocolInitFailure notification is enabled. A value of false… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.1.1.10 |
efmCuPmeCapabilityTable
table.1.3.6.1.2.1.167.1.2.2
·
1 row entry
·
1 columns
Table for the configuration of common aspects for EFMCu
2BASE-TL/10PASS-TS PME ports (modems). The configuration of
aspects specific to 2BASE-TL or 10PASS-TS PME types is
represented in the efmCuPme2BConfTable and the
efmCuPme10PConfTable, respectively.
Entries in this table MUST be maintained in a persistent
manner.
An entry in the EFMCu PME Capability table.
Each entry represents common aspects of an EFMCu PME port
indexed by the ifIndex. Note that an EFMCu PME port can be
stacked below a single PCS port, also indexed by ifIndex,…
Each entry represents common aspects of an EFMCu PME port
indexed by the ifIndex. Note that an EFMCu PME port can be
stacked below a single PCS port, also indexed by ifIndex,…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPmeSubTypesSupported
PME supported subtypes. This is a bitmap of possible
subtypes. The various bit positions are: ieee2BaseTLO - PME is capable of operating as 2BaseTL-O ieee2BaseTLR - PME is capable of operating as 2BaseTL-R … |
Bits Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.2.1.1 |
efmCuPmeStatusTable
table.1.3.6.1.2.1.167.1.2.3
·
1 row entry
·
11 columns
This table provides common status information of EFMCu
2BASE-TL/10PASS-TS PME ports. Status information specific
to 10PASS-TS PME is represented in efmCuPme10PStatusTable.
This table contains live data from the equipment. As such,
it is NOT persistent.
An entry in the EFMCu PME Status table.
Each entry represents common aspects of an EFMCu PME port
indexed by the ifIndex. Note that an EFMCu PME port can be
stacked below a single PCS port, also indexed by ifIndex,
pos…
Each entry represents common aspects of an EFMCu PME port
indexed by the ifIndex. Note that an EFMCu PME port can be
stacked below a single PCS port, also indexed by ifIndex,
pos…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPmeOperStatus
Current PME link Operational Status. Possible values are:
up(1) - The link is Up and ready to pass 64/65-octet encoded frames or fragments. downNotReady(2) - The link is Down and the PME doe… |
Enumeration Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.3.1.1 |
||||||||||||
|
efmCuPmeFltStatus
Current/Last PME link Fault Status. This is a bitmap of
possible conditions. The various bit positions are: lossOfFraming - Loss of Framing for 10P or Loss of Sync word f… |
Bits Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.3.1.2 |
||||||||||||
|
efmCuPmeOperSubType
Current operational subtype of the PME.
Possible values are: ieee2BaseTLO - PME operates as 2BaseTL-O ieee2BaseTLR - PME operates as 2BaseTL-R ieee10PassTSO - PME operates as 10PassTS-… |
Enumeration Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.3.1.3 |
||||||||||||
|
efmCuPmeOperProfile
PME current operating profile. This object is a pointer to
an entry in either the efmCuPme2BProfileTable or the efmCuPme10PProfileTable, depending on the current operating SubType of the PME as indicated by efmCuPmeOpe… |
EfmProfileIndexOrZero Textual Convention: EfmProfileIndexOrZero Unsigned32Type Constraints: range: 0..255 |
.1.3.6.1.2.1.167.1.2.3.1.4 |
||||||||||||
|
efmCuPmeSnrMgn
The current Signal to Noise Ratio (SNR) margin with respect
to the received signal as perceived by the local PME. The value of 65535 is returned when the PME is Down or Initializing. This object maps to t… |
dBInteger32 Constraints: range: 65535-65535range: -127-128 |
.1.3.6.1.2.1.167.1.2.3.1.5 |
||||||||||||
|
efmCuPmePeerSnrMgn
The current SNR margin in dB with respect to the received
signal, as perceived by the remote (link partner) PME. The value of 65535 is returned when the PME is Down or Initializing. This object is irrelev… |
dBInteger32 Constraints: range: 65535-65535range: -127-128 |
.1.3.6.1.2.1.167.1.2.3.1.6 |
||||||||||||
|
efmCuPmeLineAtn
The current Line Attenuation in dB as perceived by the local
PME. The value of 65535 is returned when the PME is Down or Initializing. If a Clause 45 MDIO Interface is present, then this ob… |
dBInteger32 Constraints: range: 65535-65535range: -127-128 |
.1.3.6.1.2.1.167.1.2.3.1.7 |
||||||||||||
|
efmCuPmePeerLineAtn
The current Line Attenuation in dB as perceived by the remote
(link partner) PME. The value of 65535 is returned when the PME is Down or Initializing. This object is irrelevant for the -R PME subtypes. T… |
dBInteger32 Constraints: range: 65535-65535range: -127-128 |
.1.3.6.1.2.1.167.1.2.3.1.8 |
||||||||||||
|
efmCuPmeEquivalentLength
An estimate of the equivalent loop's physical length in
meters, as perceived by the PME after the link is established. An equivalent loop is a hypothetical 26AWG (0.4mm) loop with a perfect square root attenuation chara… |
mUnsigned32 Constraints: range: 65535-65535range: 0-8192 |
.1.3.6.1.2.1.167.1.2.3.1.9 |
||||||||||||
|
efmCuPmeTCCodingErrors
The number of 64/65-octet encapsulation errors. This counter
is incremented for each 64/65-octet encapsulation error detected by the 64/65-octet receive function. This object maps to aTCCodingViolations … |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.2.3.1.10 |
||||||||||||
|
efmCuPmeTCCrcErrors
The number of TC-CRC errors. This counter is incremented for
each TC-CRC error detected by the 64/65-octet receive function (see 61.3.3.3 and Figure 61-19). This object maps to aTCCRCErrors attribute in … |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.2.3.1.11 |
efmCuPme2BProfileTable
table.1.3.6.1.2.1.167.1.2.5.2
·
1 row entry
·
9 columns
This table supports definitions of administrative and
operating profiles for 2BASE-TL PMEs.
The first 14 entries in this table SHALL always be defined as
follows (see 802.3ah Annex 63A):
-------+-------+-------+-----+------+-------------+-----------
Profile MinRate MaxRate Power Region Constellation Comment
index (Kbps) (Kbps) (dBm)
-------+-------+-------+-----+------+-------------+-----------
1 5696 5696 13.5 1 32-TCPAM default
2 3072 3072 13.5 1 32-TCPAM
3 2048 2048 13.5 1 16-TCPAM
4 1024 1024 13.5 1 16-TCPAM
5 704 704 13.5 1 16-TCPAM
6 512 512 13.5 1 16-TCPAM
7 5696 5696 14.5 2 32-TCPAM
8 3072 3072 14.5 2 32-TCPAM
9 2048 2048 14.5 2 16-TCPAM
10 1024 1024 13.5 2 16-TCPAM
11 704 704 13.5 2 16-TCPAM
12 512 512 13.5 2 16-TCPAM
13 192 5696 0 1 0 best effort
14 192 5696 0 2 0 best effort
-------+-------+-------+-----+------+-------------+-----------
These default entries SHALL be created during agent
initialization and MUST NOT be deleted.
Entries following the first 14 can be dynamically created and
deleted to provide custom administrative (configuration)
profiles and automatic operating profiles.
This table MUST be maintained in a persistent manner.
Each entry corresponds to a single 2BASE-TL PME profile.
Each profile contains a set of parameters, used either for
configuration or representation of a 2BASE-TL PME.
In case a particular profile is referenced via the
e…
Each profile contains a set of parameters, used either for
configuration or representation of a 2BASE-TL PME.
In case a particular profile is referenced via the
e…
Indexes
efmCuPme2BProfileIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPme2BProfileIndex
2BASE-TL PME profile index.
This object is the unique index associated with this profile. Entries in this table are referenced via efmCuAdminProfile or efmCuPmeAdminProfile objects. |
EfmProfileIndex Textual Convention: EfmProfileIndex Unsigned32Type Constraints: range: 1..255 |
.1.3.6.1.2.1.167.1.2.5.2.1.1 |
||||||||||||
|
efmCuPme2BProfileDescr
A textual string containing information about a 2BASE-TL PME
profile. The string may include information about the data rate and spectral limitations of this particular profile. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.2.1.167.1.2.5.2.1.2 |
||||||||||||
|
efmCuPme2BRegion
Regional settings for a 2BASE-TL PME, as specified in the
relevant Regional Annex of [G.991.2]. Regional settings specify the Power Spectral Density (PSD) mask and the Power Back-Off (PBO) values, and place limitations … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.5.2.1.3 |
||||||||||||
|
efmCuPme2BsMode
Desired custom Spectral Mode for a 2BASE-TL PME. This object
is a pointer to an entry in efmCuPme2BsModeTable and a block of entries in efmCuPme2BRateReachTable, which together define (country-specific) … |
EfmProfileIndexOrZeror/w Textual Convention: EfmProfileIndexOrZero Unsigned32Type Constraints: range: 0..255 |
.1.3.6.1.2.1.167.1.2.5.2.1.4 |
||||||||||||
|
efmCuPme2BMinDataRate
Minimum Data Rate for the 2BASE-TL PME.
This object can take values of (n x 64)Kbps, where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding. The data rate of the 2BASE-TL PME is considered 'fixed' … |
KbpsUnsigned32r/w Constraints: range: 192-5696 |
.1.3.6.1.2.1.167.1.2.5.2.1.5 |
||||||||||||
|
efmCuPme2BMaxDataRate
Maximum Data Rate for the 2BASE-TL PME.
This object can take values of (n x 64)Kbps, where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding. The data rate of the 2BASE-TL PME is considered 'fixed' … |
KbpsUnsigned32r/w Constraints: range: 192-5696 |
.1.3.6.1.2.1.167.1.2.5.2.1.6 |
||||||||||||
|
efmCuPme2BPower
Signal Transmit Power. Multiple of 0.5 dBm.
The value of 0 in the administrative profile means that the signal transmit power is not fixed and SHALL be set to maximize the attainable rate, under the spectral limitation… |
0.5 dBmUnsigned32r/w Constraints: range: 10-42range: 0-0 |
.1.3.6.1.2.1.167.1.2.5.2.1.7 |
||||||||||||
|
efmCuPme2BConstellation
TCPAM Constellation of the 2BASE-TL PME.
The possible values are: adaptive(0) - either 16- or 32-TCPAM tcpam16(1) - 16-TCPAM tcpam32(2) - 32-TCPAM The value of adaptive(0) in the administ… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.5.2.1.8 |
||||||||||||
|
efmCuPme2BProfileRowStatus
This object controls the creation, modification, or deletion
of the associated entry in the efmCuPme2BProfileTable per the semantics of RowStatus. If an 'active' entry is referenced via efmCuAdminProfile … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.5.2.1.9 |
efmCuPme2BsModeTable
table.1.3.6.1.2.1.167.1.2.5.3
·
1 row entry
·
3 columns
This table, together with efmCu2BReachRateTable, supports
definition of administrative custom spectral modes for
2BASE-TL PMEs, describing spectral limitations in addition to
those specified by efmCuPme2BRegion.
In some countries, spectral regulations (e.g., UK ANFP) limit
the length of the loops for certain data rates. This table
allows these country-specific limitations to be specified.
Entries in this table referenced by the efmCuPme2BsMode
MUST NOT be deleted until all the active references are
removed.
This table MUST be maintained in a persistent manner.
Each entry specifies a spectral mode description and its
index, which is used to reference corresponding entries in the
efmCu2BReachRateTable.
Entries may be created/deleted using the row creation/
deletion…
index, which is used to reference corresponding entries in the
efmCu2BReachRateTable.
Entries may be created/deleted using the row creation/
deletion…
Indexes
efmCuPme2BsModeIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPme2BsModeIndex
2BASE-TL PME Spectral Mode index.
This object is the unique index associated with this spectral mode. Entries in this table are referenced via the efmCuPme2BsMode object. |
EfmProfileIndex Textual Convention: EfmProfileIndex Unsigned32Type Constraints: range: 1..255 |
.1.3.6.1.2.1.167.1.2.5.3.1.1 |
||||||||||||
|
efmCuPme2BsModeDescr
A textual string containing information about a 2BASE-TL PME
spectral mode. The string may include information about corresponding (country-specific) spectral regulations and rate/reach limitations of this particular s… |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.2.1.167.1.2.5.3.1.2 |
||||||||||||
|
efmCuPme2BsModeRowStatus
This object controls creation, modification, or deletion of
the associated entry in efmCuPme2BsModeTable per the semantics of RowStatus. If an 'active' entry is referenced via efmCuPme2BsMode instance(s),… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.5.3.1.3 |
efmCuPme2BReachRateTable
table.1.3.6.1.2.1.167.1.2.5.4
·
1 row entry
·
5 columns
This table supports the definition of administrative custom
spectral modes for 2BASE-TL PMEs, providing spectral
limitations in addition to those specified by
efmCuPme2BRegion.
The spectral regulations in some countries (e.g., UK ANFP)
limit the length of the loops for certain data rates.
This table allows these country-specific limitations to be
specified.
Below is an example of this table for [ANFP]:
----------+-------+-------
Equivalent MaxRate MaxRate
Length PAM16 PAM32
(m) (Kbps) (Kbps)
----------+-------+-------
975 2304 5696
1125 2304 5504
1275 2304 5120
1350 2304 4864
1425 2304 4544
1500 2304 4288
1575 2304 3968
1650 2304 3776
1725 2304 3520
1800 2304 3264
1875 2304 3072
1950 2048 2688
2100 1792 2368
2250 1536 0
2400 1408 0
2550 1280 0
2775 1152 0
2925 1152 0
3150 1088 0
3375 1024 0
----------+-------+-------
Entries in this table referenced by an efmCuPme2BsMode
instance MUST NOT be deleted.
This table MUST be maintained in a persistent manner.
Each entry specifies maximum 2BASE-TL PME data rates
allowed for a certain equivalent loop length, when using
16-TCPAM or 32-TCPAM encoding.
When a 2BASE-TL PME is initialized, its data rate MU…
allowed for a certain equivalent loop length, when using
16-TCPAM or 32-TCPAM encoding.
When a 2BASE-TL PME is initialized, its data rate MU…
Indexes
efmCuPme2BsModeIndex efmCuPme2BReachRateIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPme2BReachRateIndex
2BASE-TL custom spectral mode Reach-Rate table index.
This object is the unique index associated with each entry. |
EfmProfileIndex Textual Convention: EfmProfileIndex Unsigned32Type Constraints: range: 1..255 |
.1.3.6.1.2.1.167.1.2.5.4.1.1 |
||||||||||||
|
efmCuPme2BEquivalentLength
Maximum allowed equivalent loop's physical length in meters
for the specified data rates. An equivalent loop is a hypothetical 26AWG (0.4mm) loop with a perfect square root attenuation characteristic, without any … |
mUnsigned32r/w Constraints: range: 0-8192 |
.1.3.6.1.2.1.167.1.2.5.4.1.2 |
||||||||||||
|
efmCuPme2BMaxDataRatePam16
Maximum data rate for a 2BASE-TL PME at the specified
equivalent loop's length using TC-PAM16 encoding. The value of zero means that TC-PAM16 encoding should not be used at this distance. |
KbpsUnsigned32r/w Constraints: range: 192-5696range: 0-0 |
.1.3.6.1.2.1.167.1.2.5.4.1.3 |
||||||||||||
|
efmCuPme2BMaxDataRatePam32
Maximum data rate for a 2BASE-TL PME at the specified
equivalent loop's length using TC-PAM32 encoding. The value of zero means that TC-PAM32 encoding should not be used at this distance. |
KbpsUnsigned32r/w Constraints: range: 192-5696range: 0-0 |
.1.3.6.1.2.1.167.1.2.5.4.1.4 |
||||||||||||
|
efmCuPme2BReachRateRowStatus
This object controls the creation, modification, or deletion
of the associated entry in the efmCuPme2BReachRateTable per the semantics of RowStatus. If an 'active' entry is referenced via efmCuPme2BsMode … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.5.4.1.5 |
efmCuPme10PProfileTable
table.1.3.6.1.2.1.167.1.2.6.1
·
1 row entry
·
8 columns
This table supports definitions of configuration profiles for
10PASS-TS PMEs.
The first 22 entries in this table SHALL always be defined as
follows (see 802.3ah Annex 62B.3, table 62B-1):
-------+--------+----+---------+-----+-----+---------------
Profile Bandplan UPBO BandNotch DRate URate Comment
Index PSDMask# p# p# p# p#
-------+--------+----+---------+-----+-----+---------------
1 1 3 2,6,10,11 20 20 default profile
2 13 5 0 20 20
3 1 1 0 20 20
4 16 0 0 100 100
5 16 0 0 70 50
6 6 0 0 50 10
7 17 0 0 30 30
8 8 0 0 30 5
9 4 0 0 25 25
10 4 0 0 15 15
11 23 0 0 10 10
12 23 0 0 5 5
13 16 0 2,5,9,11 100 100
14 16 0 2,5,9,11 70 50
15 6 0 2,6,10,11 50 10
16 17 0 2,5,9,11 30 30
17 8 0 2,6,10,11 30 5
18 4 0 2,6,10,11 25 25
19 4 0 2,6,10,11 15 15
20 23 0 2,5,9,11 10 10
21 23 0 2,5,9,11 5 5
22 30 0 0 200 50
-------+--------+----+---------+-----+-----+---------------
These default entries SHALL be created during agent
initialization and MUST NOT be deleted.
Entries following the first 22 can be dynamically created and
deleted to provide custom administrative (configuration)
profiles and automatic operating profiles.
This table MUST be maintained in a persistent manner.
Each entry corresponds to a single 10PASS-TS PME profile.
Each profile contains a set of parameters, used either for
configuration or representation of a 10PASS-TS PME.
In case a particular profile is refer…
Each profile contains a set of parameters, used either for
configuration or representation of a 10PASS-TS PME.
In case a particular profile is refer…
Indexes
efmCuPme10PProfileIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
efmCuPme10PProfileIndex
10PASS-TS PME profile index.
This object is the unique index associated with this profile. Entries in this table are referenced via efmCuAdminProfile or efmCuPmeAdminProfile. |
EfmProfileIndex Textual Convention: EfmProfileIndex Unsigned32Type Constraints: range: 1..255 |
.1.3.6.1.2.1.167.1.2.6.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PProfileDescr
A textual string containing information about a 10PASS-TS PME
profile. The string may include information about data rate and spectral limitations of this particular profile. |
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.2.1.167.1.2.6.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PBandplanPSDMskProfile
The 10PASS-TS PME Bandplan and PSD Mask Profile, as specified
in 802.3ah Annex 62A, table 62A-1. Possible values are: --------------+------------------------+------------+-------- Profile Name PSD Mask … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.6.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PUPBOReferenceProfile
The 10PASS-TS PME Upstream Power Back-Off (UPBO) Reference
PSD Profile, as specified in 802.3 Annex 62A, table 62A-3. Possible values are: ------------+----------------------------- Profile Name Reference PSD --------… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.6.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PBandNotchProfiles
The 10PASS-TS PME Egress Control Band Notch Profile bitmap,
as specified in 802.3 Annex 62A, table 62A-4. Possible values are: --------------+--------+------+------------+------+------ Profile Name G.991.3 T1.424 TS… |
Bitsr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.6.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PPayloadDRateProfile
The 10PASS-TS PME Downstream Payload Rate Profile, as
specified in 802.3 Annex 62A. Possible values are: profile5(5) - 2.5 Mbps profile10(10) - 5 Mbps profile15(15) - 7.5 Mbps profile2… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.6.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PPayloadURateProfile
The 10PASS-TS PME Upstream Payload Rate Profile, as specified
in 802.3 Annex 62A. Possible values are: profile5(5) - 2.5 Mbps profile10(10) - 5 Mbps profile15(15) - 7.5 Mbps profile20(20) - 10 Mbp… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.167.1.2.6.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
efmCuPme10PProfileRowStatus
This object controls creation, modification, or deletion of
the associated entry in efmCuPme10PProfileTable per the semantics of RowStatus. If an active entry is referenced via efmCuAdminProfile or efmCuP… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.167.1.2.6.1.1.8 |
efmCuPme10PStatusTable
table.1.3.6.1.2.1.167.1.2.6.2
·
1 row entry
·
2 columns
This table provides status information of EFMCu 10PASS-TS
PMEs (modems).
This table contains live data from the equipment. As such,
it is NOT persistent.
An entry in the EFMCu 10PASS-TS PME Status table.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
efmCuPme10PFECCorrectedBlocks
The number of received and corrected Forward Error Correction
(FEC) codewords in this 10PASS-TS PME. This object maps to the aPMEFECCorrectedBlocks attribute in Clause 30. If a Clause 45 MD… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.2.6.2.1.1 |
|
efmCuPme10PFECUncorrectedBlocks
The number of received uncorrectable FEC codewords in this
10PASS-TS PME. This object maps to the aPMEFECUncorrectableBlocks attribute in Clause 30. If a Clause 45 MDIO Interface to the PMA… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.167.1.2.6.2.1.2 |