efmCuPmeAdminSubType

EFM-CU-MIB · .1.3.6.1.2.1.167.1.2.1.1.1

Object

column r/w Enumeration

Administrative (desired) subtype of the PME.
Possible values are:
  ieee2BaseTLO           - PME SHALL operate as 2BaseTL-O
  ieee2BaseTLR           - PME SHALL operate as 2BaseTL-R
  ieee10PassTSO          - PME SHALL operate as 10PassTS-O
  ieee10PassTSR          - PME SHALL operate as 10PassTS-R
  ieee2BaseTLor10PassTSR - PME SHALL operate as 2BaseTL-R or
                           10PassTS-R.  The actual value will
                           be set by the -O link partner
                           during initialization (handshake).
  ieee2BaseTLor10PassTSO - PME SHALL operate as 2BaseTL-O
                           (preferred) or 10PassTS-O.  The
                           actual value will be set during
                           initialization depending on the -R
                           link partner capability (i.e., if
                           -R is incapable of the preferred
                           2BaseTL mode, 10PassTS will be
                           used).
  ieee10PassTSor2BaseTLO - PME SHALL operate as 10PassTS-O
              
                           (preferred) or 2BaseTL-O.  The
                           actual value will be set during
                           initialization depending on the -R
                           link partner capability (i.e., if
                           -R is incapable of the preferred
                           10PassTS mode, 2BaseTL will be
                           used).
              
Changing efmCuPmeAdminSubType is a traffic-disruptive
operation and as such SHALL be done when the link is Down.
Attempts to change this object SHALL be rejected if the link
is Up or Initializing.
Attempts to change this object to an unsupported subtype
(see efmCuPmeSubTypesSupported) SHALL be rejected.
              
The current operational subtype is indicated by the
efmCuPmeOperSubType variable.
              
If a Clause 45 MDIO Interface to the PMA/PMD is present, then
this object combines values of the Port subtype select bits
and the PMA/PMD type selection bits in the 10P/2B PMA/PMD
control register.

Context

MIB: EFM-CU-MIB
OID: .1.3.6.1.2.1.167.1.2.1.1.1
Type: column
Access: readwrite
Status: current
Parent: efmCuPmeConfEntry
Table: efmCuPmeConfTable
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	ieee2BaseTLO
`2`	ieee2BaseTLR
`3`	ieee10PassTSO
`4`	ieee10PassTSR
`5`	ieee2BaseTLor10PassTSR
`6`	ieee2BaseTLor10PassTSO
`7`	ieee10PassTSor2BaseTLO

Related Objects

Sibling Objects

Object	Type	Syntax	OID
efmCuPmeProtocolInitFailEnable Indicates whether efmCuPmeProtocolInitFailure notifications should be generated for this interface. A value of true(1) indicates that efmCuPmeProtocolInitFailure no…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.2.1.1.10`
efmCuPmeAdminProfile Desired PME configuration profile. This object is a pointer to an entry in either the efmCuPme2BProfileTable or the efmCuPme10PProfileTable, depending on the current operating Su…	column	EfmProfileIndexOrZero	`.1.3.6.1.2.1.167.1.2.1.1.2`
efmCuPAFRemoteDiscoveryCode PAF Remote Discovery Code of the PME port at the CO. The 6-octet Discovery Code of the peer PCS connected via the PME. Reading this object results in a Discovery Get operation. Se…	column	OctetString	`.1.3.6.1.2.1.167.1.2.1.1.3`
efmCuPmeThreshLineAtn Desired Line Attenuation threshold for the 2B/10P PME. This object configures the line attenuation alarm threshold. When the current value of Line Attenuation reaches or exceeds t…	column	dB Integer32	`.1.3.6.1.2.1.167.1.2.1.1.4`
efmCuPmeThreshSnrMgn Desired SNR margin threshold for the 2B/10P PME. This object configures the SNR margin alarm threshold. When the current value of SNR margin reaches or exceeds this threshold, an …	column	dB Integer32	`.1.3.6.1.2.1.167.1.2.1.1.5`
efmCuPmeLineAtnCrossingEnable Indicates whether efmCuPmeLineAtnCrossing notifications should be generated for this interface. A value of true(1) indicates that efmCuPmeLineAtnCrossing notificati…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.2.1.1.6`
efmCuPmeSnrMgnCrossingEnable Indicates whether efmCuPmeSnrMgnCrossing notifications should be generated for this interface. A value of true(1) indicates that efmCuPmeSnrMgnCrossing notification…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.2.1.1.7`
efmCuPmeDeviceFaultEnable Indicates whether efmCuPmeDeviceFault notifications should be generated for this interface. A value of true(1) indicates that efmCuPmeDeviceFault not…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.2.1.1.8`
efmCuPmeConfigInitFailEnable Indicates whether efmCuPmeConfigInitFailure notifications should be generated for this interface. A value of true(1) indicates that efmCuPmeConfigInitFailure notifi…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.2.1.1.9`