efmCuPme2BMinDataRate
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.2.5.2.1.5
Object
column
r/w
Kbps Unsigned32
Minimum Data Rate for the 2BASE-TL PME.
This object can take values of (n x 64)Kbps,
where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
The data rate of the 2BASE-TL PME is considered 'fixed' when
the value of this object equals that of efmCuPme2BMaxDataRate.
If efmCuPme2BMinDataRate is less than efmCuPme2BMaxDataRate in
the administrative profile, the data rate is considered
'adaptive', and SHALL be set to the maximum attainable rate
not exceeding efmCuPme2BMaxDataRate, under the spectral
limitations placed by the efmCuPme2BRegion and
efmCuPme2BsMode.
Note that the current operational data rate of the PME is
represented by the ifSpeed object of IF-MIB.
If a Clause 45 MDIO Interface to the PME is present, then this
object maps to the Min Data Rate1 bits in the 2B PMD
parameters register.
This object MUST be maintained in a persistent manner.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.2.5.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- Kbps
- Parent
- efmCuPme2BProfileEntry
- Table
- efmCuPme2BProfileTable
- Siblings
- 8
Syntax
Kbps Unsigned32
Values & Constraints
Object Constraints
range: 192-5696
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPme2BProfileIndex 2BASE-TL PME profile index.
This object is the unique index associated with this profile.
Entries in this table are referenced via efmCuAdminProfile or
efmCuPmeAdminProfile object… | column | EfmProfileIndex | .1.3.6.1.2.1.167.1.2.5.2.1.1 |
| efmCuPme2BProfileDescr A textual string containing information about a 2BASE-TL PME
profile. The string may include information about the data
rate and spectral limitations of this particular profile. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.167.1.2.5.2.1.2 |
| efmCuPme2BRegion Regional settings for a 2BASE-TL PME, as specified in the
relevant Regional Annex of [G.991.2].
Regional settings specify the Power Spectral Density (PSD)
mask and the Power Back-… | column | Enumeration | .1.3.6.1.2.1.167.1.2.5.2.1.3 |
| efmCuPme2BsMode Desired custom Spectral Mode for a 2BASE-TL PME. This object
is a pointer to an entry in efmCuPme2BsModeTable and a block
of entries in efmCuPme2BRateReachTable, w… | column | EfmProfileIndexOrZero | .1.3.6.1.2.1.167.1.2.5.2.1.4 |
| efmCuPme2BMaxDataRate Maximum Data Rate for the 2BASE-TL PME.
This object can take values of (n x 64)Kbps,
where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
The data rate of… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.2.5.2.1.6 |
| efmCuPme2BPower Signal Transmit Power. Multiple of 0.5 dBm.
The value of 0 in the administrative profile means that the
signal transmit power is not fixed and SHALL be set to
maximize the attain… | column | 0.5 dBm Unsigned32 | .1.3.6.1.2.1.167.1.2.5.2.1.7 |
| efmCuPme2BConstellation TCPAM Constellation of the 2BASE-TL PME.
The possible values are:
adaptive(0) - either 16- or 32-TCPAM
tcpam16(1) - 16-TCPAM
tcpam32(2) - 32-TCPAM
… | column | Enumeration | .1.3.6.1.2.1.167.1.2.5.2.1.8 |
| efmCuPme2BProfileRowStatus This object controls the creation, modification, or deletion
of the associated entry in the efmCuPme2BProfileTable per the
semantics of RowStatus.
If an 'active' en… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.167.1.2.5.2.1.9 |