efmCuPAFRemoteDiscoveryCode
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.2.1.1.3
Object
column
r/w
OctetString
PAF Remote Discovery Code of the PME port at the CO.
The 6-octet Discovery Code of the peer PCS connected via
the PME.
Reading this object results in a Discovery Get operation.
Setting this object to all zeroes results in a Discovery
Clear_if_Same operation (the value of efmCuPAFDiscoveryCode
at the peer PCS SHALL be the same as efmCuPAFDiscoveryCode of
the local PCS associated with the PME for the operation to
succeed).
Writing a non-zero value to this object results in a
Discovery Set_if_Clear operation.
A zero-length octet string SHALL be returned on an attempt to
read this object when PAF aggregation is not enabled.
This object is irrelevant in CPE port (-R) subtypes: in this
case, a zero-length octet string SHALL be returned on an
attempt to read this object; writing to this object SHALL
be rejected.
Discovery MUST be performed when the link is Down.
Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), if the link is Up or
Initializing.
If a Clause 45 MDIO Interface to the PMA/PMD is present, then
this object is a function of 10P/2B aggregation discovery
control register, Discovery operation result bits in 10P/2B
aggregation and discovery status register and
10P/2B aggregation discovery code register.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- efmCuPmeConfEntry
- Table
- efmCuPmeConfTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-0
range: 6-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPmeAdminSubType Administrative (desired) subtype of the PME.
Possible values are:
ieee2BaseTLO - PME SHALL operate as 2BaseTL-O
ieee2BaseTLR - PME SHALL operate as 2BaseTL… | column | Enumeration | .1.3.6.1.2.1.167.1.2.1.1.1 |
| efmCuPmeProtocolInitFailEnable Indicates whether efmCuPmeProtocolInitFailure notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeProtocolInitFailure
no… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.10 |
| efmCuPmeAdminProfile Desired PME configuration profile. This object is a pointer
to an entry in either the efmCuPme2BProfileTable or the
efmCuPme10PProfileTable, depending on the current operating
Su… | column | EfmProfileIndexOrZero | .1.3.6.1.2.1.167.1.2.1.1.2 |
| efmCuPmeThreshLineAtn Desired Line Attenuation threshold for the 2B/10P PME.
This object configures the line attenuation alarm threshold.
When the current value of Line Attenuation reaches or
exceeds t… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.1.1.4 |
| efmCuPmeThreshSnrMgn Desired SNR margin threshold for the 2B/10P PME.
This object configures the SNR margin alarm threshold.
When the current value of SNR margin reaches or exceeds this
threshold, an … | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.1.1.5 |
| efmCuPmeLineAtnCrossingEnable Indicates whether efmCuPmeLineAtnCrossing notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeLineAtnCrossing
notificati… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.6 |
| efmCuPmeSnrMgnCrossingEnable Indicates whether efmCuPmeSnrMgnCrossing notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeSnrMgnCrossing
notification… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.7 |
| efmCuPmeDeviceFaultEnable Indicates whether efmCuPmeDeviceFault notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeDeviceFault
not… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.8 |
| efmCuPmeConfigInitFailEnable Indicates whether efmCuPmeConfigInitFailure notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeConfigInitFailure
notifi… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.9 |