efmCuPmeOperStatus
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.2.3.1.1
Object
column
Enumeration
Current PME link Operational Status. Possible values are:
up(1) - The link is Up and ready to pass
64/65-octet encoded frames or fragments.
downNotReady(2) - The link is Down and the PME does not
detect Handshake tones from its peer.
This value may indicate a possible
problem with the peer PME.
downReady(3) - The link is Down and the PME detects
Handshake tones from its peer.
init(4) - The link is Initializing, as a result of
ifAdminStatus being set to 'up' for a
particular PME or a PCS to which the PME
is connected.
This object is intended to supplement the Down(2) state of
ifOperStatus.
This object partially maps to the Clause 30 attribute
aPMEStatus.
If a Clause 45 MDIO Interface to the PME is present, then this
object partially maps to PMA/PMD link status bits in 10P/2B
PMA/PMD status register.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.2.3.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- efmCuPmeStatusEntry
- Table
- efmCuPmeStatusTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | downNotReady |
3 | downReady |
4 | init |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPmeTCCodingErrors The number of 64/65-octet encapsulation errors. This counter
is incremented for each 64/65-octet encapsulation error
detected by the 64/65-octet receive function.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.167.1.2.3.1.10 |
| efmCuPmeTCCrcErrors The number of TC-CRC errors. This counter is incremented for
each TC-CRC error detected by the 64/65-octet receive function
(see 61.3.3.3 and Figure 61-19).
This o… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.167.1.2.3.1.11 |
| efmCuPmeFltStatus Current/Last PME link Fault Status. This is a bitmap of
possible conditions. The various bit positions are:
lossOfFraming - Loss of Framing for 10P or
… | column | Bits | .1.3.6.1.2.1.167.1.2.3.1.2 |
| efmCuPmeOperSubType Current operational subtype of the PME.
Possible values are:
ieee2BaseTLO - PME operates as 2BaseTL-O
ieee2BaseTLR - PME operates as 2BaseTL-R
ieee10Pass… | column | Enumeration | .1.3.6.1.2.1.167.1.2.3.1.3 |
| efmCuPmeOperProfile PME current operating profile. This object is a pointer to
an entry in either the efmCuPme2BProfileTable or the
efmCuPme10PProfileTable, depending on the current operating
SubTyp… | column | EfmProfileIndexOrZero | .1.3.6.1.2.1.167.1.2.3.1.4 |
| efmCuPmeSnrMgn The current Signal to Noise Ratio (SNR) margin with respect
to the received signal as perceived by the local PME.
The value of 65535 is returned when the PME is Down or
Initializi… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.3.1.5 |
| efmCuPmePeerSnrMgn The current SNR margin in dB with respect to the received
signal, as perceived by the remote (link partner) PME.
The value of 65535 is returned when the PME is Down or
Initializin… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.3.1.6 |
| efmCuPmeLineAtn The current Line Attenuation in dB as perceived by the local
PME.
The value of 65535 is returned when the PME is Down or
Initializing.
If a Clause 45… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.3.1.7 |
| efmCuPmePeerLineAtn The current Line Attenuation in dB as perceived by the remote
(link partner) PME.
The value of 65535 is returned when the PME is Down or
Initializing.
This object i… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.3.1.8 |
| efmCuPmeEquivalentLength An estimate of the equivalent loop's physical length in
meters, as perceived by the PME after the link is established.
An equivalent loop is a hypothetical 26AWG (0.4mm) loop with… | column | m Unsigned32 | .1.3.6.1.2.1.167.1.2.3.1.9 |