efmCuPAFAdminState

EFM-CU-MIB · .1.3.6.1.2.1.167.1.1.1.1.1

Object

column r/w Enumeration

Administrative (desired) state of the PAF of the EFMCu port
(PCS).
When 'disabled', PME aggregation will not be performed by the
PCS.  No more than a single PME can be assigned to this PCS in
this case.
When 'enabled', PAF will be performed by the PCS when the link
is Up, even on a single attached PME, if PAF is supported.
              
PCS ports incapable of supporting PAF SHALL return a value of
'disabled'.  Attempts to 'enable' such ports SHALL be
rejected.
              
A PAF 'enabled' port with multiple PMEs assigned cannot be
'disabled'.  Attempts to 'disable' such port SHALL be
rejected, until at most one PME is left assigned.
              
Changing PAFAdminState is a traffic-disruptive operation and
as such SHALL be done when the link is Down.  Attempts to
change this object SHALL be rejected if the link is Up or
Initializing.
              
This object maps to the Clause 30 attribute aPAFAdminState.
              
If a Clause 45 MDIO Interface to the PCS is present, then this
object maps to the PAF enable bit in the 10P/2B PCS control
register.
              
This object MUST be maintained in a persistent manner.

Context

MIB: EFM-CU-MIB
OID: .1.3.6.1.2.1.167.1.1.1.1.1
Type: column
Access: readwrite
Status: current
Parent: efmCuPortConfEntry
Table: efmCuPortConfTable
Siblings: 7

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enabled
`2`	disabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
efmCuPAFDiscoveryCode PAF Discovery Code of the EFMCu port (PCS). A unique 6-octet code used by the Discovery function, when PAF is supported. PCS ports incapable of supporting PAF SHALL return a zero-…	column	OctetString	`.1.3.6.1.2.1.167.1.1.1.1.2`
efmCuAdminProfile Desired configuration profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either efmCuPme2BProfileTable or efmCuPme10PProfileTable,…	column	EfmProfileIndexList	`.1.3.6.1.2.1.167.1.1.1.1.3`
efmCuTargetDataRate Desired EFMCu port 'net' (as seen across MII) Data Rate in Kbps, to be achieved during initialization, under spectral restrictions placed on each PME via efmCuAdminProfile or …	column	Kbps Unsigned32	`.1.3.6.1.2.1.167.1.1.1.1.4`
efmCuTargetSnrMgn Desired EFMCu port SNR margin to be achieved on all PMEs assigned to the port, during initialization. (The SNR margin is the difference between the desired SNR and …	column	dB Unsigned32	`.1.3.6.1.2.1.167.1.1.1.1.5`
efmCuAdaptiveSpectra Indicates how to utilize excess capacity when the copper environment allows a higher total data rate to be achieved than that specified by the efmCuTargetDataRate. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.1.1.1.6`
efmCuThreshLowRate This object configures the EFMCu port low-rate crossing alarm threshold. When the current value of ifSpeed for this port reaches/drops below or exceeds this threshold, an efmCuLo…	column	Kbps Unsigned32	`.1.3.6.1.2.1.167.1.1.1.1.7`
efmCuLowRateCrossingEnable Indicates whether efmCuLowRateCrossing notifications should be generated for this interface. A value of true(1) indicates that efmCuLowRateCrossing notification is …	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.167.1.1.1.1.8`