efmCuAdminProfile
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.1.1.1.3
Object
column
r/w
EfmProfileIndexList
Desired configuration profile(s), common for all PMEs in the
EFMCu port. This object is a list of pointers to entries in
either efmCuPme2BProfileTable or
efmCuPme10PProfileTable, depending on the current
operating SubType of the EFMCu port as indicated by
efmCuPortSide.
The value of this object is a list of up to 6 indices of
profiles. If this list consists of a single profile index,
then all PMEs assigned to this EFMCu port SHALL be configured
according to the profile referenced by that index, unless it
is overwritten by a corresponding non-zero
efmCuPmeAdminProfile instance, which takes precedence over
efmCuAdminProfile.
A list consisting of more than one index allows each PME
in the port to be configured according to any profile
specified in the list.
By default, this object has a value of 0x01, referencing the
1st entry in efmCuPme2BProfileTable or
efmCuPme10PProfileTable.
This object is writable and readable for the -O subtype
(2BaseTL-O or 10PassTS-O) EFMCu ports. It is irrelevant for
the -R subtype (2BaseTL-R or 10PassTS-R) ports -- a
zero-length octet string SHALL be returned on an attempt to
read this object and an attempt to change this object MUST be
rejected in this case.
Note that the current operational profile value is available
via the efmCuPmeOperProfile object.
Any modification of this object MUST be performed when the
link is Down. Attempts to change this object MUST be
rejected, if the link is Up or Initializing.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding profile table MUST be rejected.
This object maps to the Clause 30 attribute aProfileSelect.
This object MUST be maintained in a persistent manner.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- efmCuPortConfEntry
- Table
- efmCuPortConfTable
- Siblings
- 7
Syntax
EfmProfileIndexList
- Source
- EfmProfileIndexList
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPAFAdminState Administrative (desired) state of the PAF of the EFMCu port
(PCS).
When 'disabled', PME aggregation will not be performed by the
PCS. No more than a single PME can be assigned to… | column | Enumeration | .1.3.6.1.2.1.167.1.1.1.1.1 |
| efmCuPAFDiscoveryCode PAF Discovery Code of the EFMCu port (PCS).
A unique 6-octet code used by the Discovery function,
when PAF is supported.
PCS ports incapable of supporting PAF SHALL return a
zero-… | column | OctetString | .1.3.6.1.2.1.167.1.1.1.1.2 |
| efmCuTargetDataRate Desired EFMCu port 'net' (as seen across MII) Data Rate in
Kbps, to be achieved during initialization, under spectral
restrictions placed on each PME via efmCuAdminProfile or
… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.4 |
| efmCuTargetSnrMgn Desired EFMCu port SNR margin to be achieved on all PMEs
assigned to the port, during initialization. (The SNR margin
is the difference between the desired SNR and … | column | dB Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.5 |
| efmCuAdaptiveSpectra Indicates how to utilize excess capacity when the copper
environment allows a higher total data rate to be achieved
than that specified by the efmCuTargetDataRate.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.1.1.1.6 |
| efmCuThreshLowRate This object configures the EFMCu port low-rate crossing alarm
threshold. When the current value of ifSpeed for this port
reaches/drops below or exceeds this threshold, an
efmCuLo… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.7 |
| efmCuLowRateCrossingEnable Indicates whether efmCuLowRateCrossing notifications should
be generated for this interface.
A value of true(1) indicates that efmCuLowRateCrossing
notification is … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.1.1.1.8 |