efmCuPAFDiscoveryCode
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.1.1.1.2
Object
column
r/w
OctetString
PAF Discovery Code of the EFMCu port (PCS).
A unique 6-octet code used by the Discovery function,
when PAF is supported.
PCS ports incapable of supporting PAF SHALL return a
zero-length octet string on an attempt to read this object.
An attempt to write to this object SHALL be rejected for such
ports.
This object MUST be instantiated for the -O subtype PCS before
writing operations on the efmCuPAFRemoteDiscoveryCode
(Set_if_Clear and Clear_if_Same) are performed by PMEs
associated with the PCS.
The initial value of this object for -R subtype ports after
reset is all zeroes. For -R subtype ports, the value of this
object cannot be changed directly. This value may be changed
as a result of writing operation on the
efmCuPAFRemoteDiscoveryCode object of remote PME of -O
subtype, connected to one of the local PMEs associated with
the PCS.
Discovery MUST be performed when the link is Down.
Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), if the link is Up or
Initializing.
The PAF Discovery Code maps to the local Discovery code
variable in PAF (note that it does not have a corresponding
Clause 45 register).
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- efmCuPortConfEntry
- Table
- efmCuPortConfTable
- Siblings
- 7
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-0
range: 6-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPAFAdminState Administrative (desired) state of the PAF of the EFMCu port
(PCS).
When 'disabled', PME aggregation will not be performed by the
PCS. No more than a single PME can be assigned to… | column | Enumeration | .1.3.6.1.2.1.167.1.1.1.1.1 |
| efmCuAdminProfile Desired configuration profile(s), common for all PMEs in the
EFMCu port. This object is a list of pointers to entries in
either efmCuPme2BProfileTable or
efmCuPme10PProfileTable,… | column | EfmProfileIndexList | .1.3.6.1.2.1.167.1.1.1.1.3 |
| efmCuTargetDataRate Desired EFMCu port 'net' (as seen across MII) Data Rate in
Kbps, to be achieved during initialization, under spectral
restrictions placed on each PME via efmCuAdminProfile or
… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.4 |
| efmCuTargetSnrMgn Desired EFMCu port SNR margin to be achieved on all PMEs
assigned to the port, during initialization. (The SNR margin
is the difference between the desired SNR and … | column | dB Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.5 |
| efmCuAdaptiveSpectra Indicates how to utilize excess capacity when the copper
environment allows a higher total data rate to be achieved
than that specified by the efmCuTargetDataRate.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.1.1.1.6 |
| efmCuThreshLowRate This object configures the EFMCu port low-rate crossing alarm
threshold. When the current value of ifSpeed for this port
reaches/drops below or exceeds this threshold, an
efmCuLo… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.7 |
| efmCuLowRateCrossingEnable Indicates whether efmCuLowRateCrossing notifications should
be generated for this interface.
A value of true(1) indicates that efmCuLowRateCrossing
notification is … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.1.1.1.8 |