efmCuPme2BRegion
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.2.5.2.1.3
Object
column
r/w
Enumeration
Regional settings for a 2BASE-TL PME, as specified in the
relevant Regional Annex of [G.991.2].
Regional settings specify the Power Spectral Density (PSD)
mask and the Power Back-Off (PBO) values, and place
limitations on the max allowed data rate, power, and
constellation.
Possible values for this object are:
region1 - Annexes A and F (e.g., North America)
region2 - Annexes B and G (e.g., Europe)
Annex A/B specify regional settings for data rates 192-2304
Kbps using 16-TCPAM encoding.
Annex F/G specify regional settings for rates 2320-3840 Kbps
using 16-TCPAM encoding and 768-5696 Kbps using 32-TCPAM
encoding.
If a Clause 45 MDIO Interface to the PME is present, then this
object partially maps to the Region bits in the 2B general
parameter register.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.2.5.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- efmCuPme2BProfileEntry
- Table
- efmCuPme2BProfileTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | region1 |
2 | region2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPme2BProfileIndex 2BASE-TL PME profile index.
This object is the unique index associated with this profile.
Entries in this table are referenced via efmCuAdminProfile or
efmCuPmeAdminProfile object… | column | EfmProfileIndex | .1.3.6.1.2.1.167.1.2.5.2.1.1 |
| efmCuPme2BProfileDescr A textual string containing information about a 2BASE-TL PME
profile. The string may include information about the data
rate and spectral limitations of this particular profile. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.167.1.2.5.2.1.2 |
| efmCuPme2BsMode Desired custom Spectral Mode for a 2BASE-TL PME. This object
is a pointer to an entry in efmCuPme2BsModeTable and a block
of entries in efmCuPme2BRateReachTable, w… | column | EfmProfileIndexOrZero | .1.3.6.1.2.1.167.1.2.5.2.1.4 |
| efmCuPme2BMinDataRate Minimum Data Rate for the 2BASE-TL PME.
This object can take values of (n x 64)Kbps,
where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
The data rate of… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.2.5.2.1.5 |
| efmCuPme2BMaxDataRate Maximum Data Rate for the 2BASE-TL PME.
This object can take values of (n x 64)Kbps,
where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
The data rate of… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.2.5.2.1.6 |
| efmCuPme2BPower Signal Transmit Power. Multiple of 0.5 dBm.
The value of 0 in the administrative profile means that the
signal transmit power is not fixed and SHALL be set to
maximize the attain… | column | 0.5 dBm Unsigned32 | .1.3.6.1.2.1.167.1.2.5.2.1.7 |
| efmCuPme2BConstellation TCPAM Constellation of the 2BASE-TL PME.
The possible values are:
adaptive(0) - either 16- or 32-TCPAM
tcpam16(1) - 16-TCPAM
tcpam32(2) - 32-TCPAM
… | column | Enumeration | .1.3.6.1.2.1.167.1.2.5.2.1.8 |
| efmCuPme2BProfileRowStatus This object controls the creation, modification, or deletion
of the associated entry in the efmCuPme2BProfileTable per the
semantics of RowStatus.
If an 'active' en… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.167.1.2.5.2.1.9 |