efmCuPmeThreshLineAtn
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.2.1.1.4
Object
column
r/w
dB Integer32
Desired Line Attenuation threshold for the 2B/10P PME.
This object configures the line attenuation alarm threshold.
When the current value of Line Attenuation reaches or
exceeds this threshold, an efmCuPmeLineAtnCrossing
notification MAY be generated, if enabled by
efmCuPmeLineAtnCrossingEnable.
This object is writable for the CO subtype PMEs (-O).
It is read-only for the CPE subtype (-R).
Changing of the Line Attenuation threshold MUST be performed
when the link is Down. Attempts to change this object MUST be
rejected (in case of SNMP with the error inconsistentValue),
if the link is Up or Initializing.
If a Clause 45 MDIO Interface to the PME is present, then this
object maps to the loop attenuation threshold bits in
the 2B PMD line quality thresholds register.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dB
- Parent
- efmCuPmeConfEntry
- Table
- efmCuPmeConfTable
- Siblings
- 9
Syntax
dB Integer32
Values & Constraints
Object Constraints
range: -127-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPmeAdminSubType Administrative (desired) subtype of the PME.
Possible values are:
ieee2BaseTLO - PME SHALL operate as 2BaseTL-O
ieee2BaseTLR - PME SHALL operate as 2BaseTL… | column | Enumeration | .1.3.6.1.2.1.167.1.2.1.1.1 |
| efmCuPmeProtocolInitFailEnable Indicates whether efmCuPmeProtocolInitFailure notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeProtocolInitFailure
no… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.10 |
| efmCuPmeAdminProfile Desired PME configuration profile. This object is a pointer
to an entry in either the efmCuPme2BProfileTable or the
efmCuPme10PProfileTable, depending on the current operating
Su… | column | EfmProfileIndexOrZero | .1.3.6.1.2.1.167.1.2.1.1.2 |
| efmCuPAFRemoteDiscoveryCode PAF Remote Discovery Code of the PME port at the CO.
The 6-octet Discovery Code of the peer PCS connected via
the PME.
Reading this object results in a Discovery Get operation.
Se… | column | OctetString | .1.3.6.1.2.1.167.1.2.1.1.3 |
| efmCuPmeThreshSnrMgn Desired SNR margin threshold for the 2B/10P PME.
This object configures the SNR margin alarm threshold.
When the current value of SNR margin reaches or exceeds this
threshold, an … | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.1.1.5 |
| efmCuPmeLineAtnCrossingEnable Indicates whether efmCuPmeLineAtnCrossing notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeLineAtnCrossing
notificati… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.6 |
| efmCuPmeSnrMgnCrossingEnable Indicates whether efmCuPmeSnrMgnCrossing notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeSnrMgnCrossing
notification… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.7 |
| efmCuPmeDeviceFaultEnable Indicates whether efmCuPmeDeviceFault notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeDeviceFault
not… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.8 |
| efmCuPmeConfigInitFailEnable Indicates whether efmCuPmeConfigInitFailure notifications
should be generated for this interface.
A value of true(1) indicates that efmCuPmeConfigInitFailure
notifi… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.2.1.1.9 |