EFM-CU-MIB

        The objects in this MIB module are used to manage
the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces
2BASE-TL and 10PASS-TS, defined in IEEE Std. 802.3ah-2004,
which is now a part of IEEE Std. 802.3-2005.
        
The following references are used throughout this MIB module:
        
[802.3ah] refers to:
  IEEE Std 802.3ah-2004: 'IEEE Standard for Information
  technology - Telecommunications and information exchange
  between systems - Local and metropolitan area networks -
  Specific requirements -
  Part 3: Carrier Sense Multiple Access with Collision
  Detection (CSMA/CD) Access Method and Physical Layer
  Specifications -
  Amendment: Media Access Control Parameters, Physical
  Layers and Management Parameters for Subscriber Access
  Networks', 07 September 2004.
        
Of particular interest are Clause 61, 'Physical Coding
Sublayer (PCS) and common specifications, type 10PASS-TS and
type 2BASE-TL', Clause 30, 'Management', Clause 45,
'Management Data Input/Output (MDIO) Interface', Annex 62A,
'PMD profiles for 10PASS-TS' and Annex 63A, 'PMD profiles for
2BASE-TL'.
        
[G.991.2] refers to:
  ITU-T Recommendation G.991.2: 'Single-pair High-speed Digital
  Subscriber Line (SHDSL) transceivers', December 2003.
        
[ANFP] refers to:
  NICC Document ND1602:2005/08: 'Specification of the Access
  Network Frequency Plan (ANFP) applicable to transmission
  systems used on the BT Access Network,' August 2005.
        
The following normative documents are quoted by the DESCRIPTION
clauses in this MIB module:
        
[G.993.1] refers to:
  ITU-T Recommendation G.993.1: 'Very High speed Digital
  Subscriber Line transceivers', June 2004.
        
[T1.424] refers to:
  ANSI T1.424-2004: 'Interface Between Networks and Customer
  Installation Very-high-bit-rate Digital Subscriber Lines
  (VDSL) Metallic Interface (DMT Based)', June 2004.
        
[TS 101 270-1] refers to:
  ETSI TS 101 270-1: 'Transmission and Multiplexing (TM);
  Access transmission systems on metallic access cables;
  Very high speed Digital Subscriber Line (VDSL); Part 1:
  Functional requirements', October 2005.
        
Naming Conventions:
  Atn   - Attenuation
  CO    - Central Office
  CPE   - Customer Premises Equipment
  EFM   - Ethernet in the First Mile
  EFMCu - EFM Copper
  MDIO  - Management Data Input/Output
  Mgn   - Margin
  PAF   - PME Aggregation Function
  PBO   - Power Back-Off
  PCS   - Physical Coding Sublayer
  PMD   - Physical Medium Dependent
  PME   - Physical Medium Entity
  PSD   - Power Spectral Density
  SNR   - Signal to Noise Ratio
  TCPAM - Trellis Coded Pulse Amplitude Modulation
        
Copyright (C) The IETF Trust (2007).  This version
of this MIB module is part of RFC 5066;  see the RFC
itself for full legal notices.
    
efmCuMIB 1.3.6.1.2.1.167
Imported Objects
IF-MIB ifIndex ifSpeed
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC PhysAddress RowStatus TEXTUAL-CONVENTION TruthValue
Type Definitions (4)
EfmProfileIndex Unsigned32 range: 1..255
EfmProfileIndexList OctetString range: 0..6
EfmProfileIndexOrZero Unsigned32 range: 0..255
EfmTruthValueOrUnknown Enumeration
unknown(0)
true(1)
false(2)
Objects (105)
efmCuMIB .1.3.6.1.2.1.167
efmCuObjects .1.3.6.1.2.1.167.1
efmCuPort .1.3.6.1.2.1.167.1.1
efmCuPortNotifications .1.3.6.1.2.1.167.1.1.0
efmCuPortConfTable .1.3.6.1.2.1.167.1.1.1
efmCuPortConfEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.1.1.1
efmCuPAFAdminState r/w Enumeration .1.3.6.1.2.1.167.1.1.1.1.1
efmCuPAFDiscoveryCode r/w OctetString .1.3.6.1.2.1.167.1.1.1.1.2
efmCuAdminProfile r/w EfmProfileIndexList .1.3.6.1.2.1.167.1.1.1.1.3
efmCuTargetDataRate r/w KbpsUnsigned32 .1.3.6.1.2.1.167.1.1.1.1.4
efmCuTargetSnrMgn r/w dBUnsigned32 .1.3.6.1.2.1.167.1.1.1.1.5
efmCuAdaptiveSpectra r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.1.1.1.6
efmCuThreshLowRate r/w KbpsUnsigned32 .1.3.6.1.2.1.167.1.1.1.1.7
efmCuLowRateCrossingEnable r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.1.1.1.8
efmCuPortCapabilityTable .1.3.6.1.2.1.167.1.1.2
efmCuPortCapabilityEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.1.2.1
efmCuPAFSupported SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.1.2.1.1
efmCuPeerPAFSupported EfmTruthValueOrUnknown .1.3.6.1.2.1.167.1.1.2.1.2
efmCuPAFCapacity Unsigned32 .1.3.6.1.2.1.167.1.1.2.1.3
efmCuPeerPAFCapacity Unsigned32 .1.3.6.1.2.1.167.1.1.2.1.4
efmCuPortStatusTable .1.3.6.1.2.1.167.1.1.3
efmCuPortStatusEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.1.3.1
efmCuFltStatus Bits .1.3.6.1.2.1.167.1.1.3.1.1
efmCuPAFInLostEnds SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.10
efmCuPAFInOverflows SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.11
efmCuPortSide Enumeration .1.3.6.1.2.1.167.1.1.3.1.2
efmCuNumPMEs Unsigned32 .1.3.6.1.2.1.167.1.1.3.1.3
efmCuPAFInErrors SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.4
efmCuPAFInSmallFragments SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.5
efmCuPAFInLargeFragments SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.6
efmCuPAFInBadFragments SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.7
efmCuPAFInLostFragments SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.8
efmCuPAFInLostStarts SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.1.3.1.9
efmCuPme .1.3.6.1.2.1.167.1.2
efmCuPmeNotifications .1.3.6.1.2.1.167.1.2.0
efmCuPmeConfTable .1.3.6.1.2.1.167.1.2.1
efmCuPmeConfEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.2.1.1
efmCuPmeAdminSubType r/w Enumeration .1.3.6.1.2.1.167.1.2.1.1.1
efmCuPmeProtocolInitFailEnable r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.2.1.1.10
efmCuPmeAdminProfile r/w EfmProfileIndexOrZero .1.3.6.1.2.1.167.1.2.1.1.2
efmCuPAFRemoteDiscoveryCode r/w OctetString .1.3.6.1.2.1.167.1.2.1.1.3
efmCuPmeThreshLineAtn r/w dBInteger32 .1.3.6.1.2.1.167.1.2.1.1.4
efmCuPmeThreshSnrMgn r/w dBInteger32 .1.3.6.1.2.1.167.1.2.1.1.5
efmCuPmeLineAtnCrossingEnable r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.2.1.1.6
efmCuPmeSnrMgnCrossingEnable r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.2.1.1.7
efmCuPmeDeviceFaultEnable r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.2.1.1.8
efmCuPmeConfigInitFailEnable r/w SNMPv2-TCTruthValue .1.3.6.1.2.1.167.1.2.1.1.9
efmCuPmeCapabilityTable .1.3.6.1.2.1.167.1.2.2
efmCuPmeCapabilityEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.2.2.1
efmCuPmeSubTypesSupported Bits .1.3.6.1.2.1.167.1.2.2.1.1
efmCuPmeStatusTable .1.3.6.1.2.1.167.1.2.3
efmCuPmeStatusEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.2.3.1
efmCuPmeOperStatus Enumeration .1.3.6.1.2.1.167.1.2.3.1.1
efmCuPmeTCCodingErrors SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.2.3.1.10
efmCuPmeTCCrcErrors SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.2.3.1.11
efmCuPmeFltStatus Bits .1.3.6.1.2.1.167.1.2.3.1.2
efmCuPmeOperSubType Enumeration .1.3.6.1.2.1.167.1.2.3.1.3
efmCuPmeOperProfile EfmProfileIndexOrZero .1.3.6.1.2.1.167.1.2.3.1.4
efmCuPmeSnrMgn dBInteger32 .1.3.6.1.2.1.167.1.2.3.1.5
efmCuPmePeerSnrMgn dBInteger32 .1.3.6.1.2.1.167.1.2.3.1.6
efmCuPmeLineAtn dBInteger32 .1.3.6.1.2.1.167.1.2.3.1.7
efmCuPmePeerLineAtn dBInteger32 .1.3.6.1.2.1.167.1.2.3.1.8
efmCuPmeEquivalentLength mUnsigned32 .1.3.6.1.2.1.167.1.2.3.1.9
efmCuPme2B .1.3.6.1.2.1.167.1.2.5
efmCuPme2BProfileTable .1.3.6.1.2.1.167.1.2.5.2
efmCuPme2BProfileEntry efmCuPme2BProfileIndex .1.3.6.1.2.1.167.1.2.5.2.1
efmCuPme2BProfileIndex EfmProfileIndex .1.3.6.1.2.1.167.1.2.5.2.1.1
efmCuPme2BProfileDescr r/w SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.2.1.167.1.2.5.2.1.2
efmCuPme2BRegion r/w Enumeration .1.3.6.1.2.1.167.1.2.5.2.1.3
efmCuPme2BsMode r/w EfmProfileIndexOrZero .1.3.6.1.2.1.167.1.2.5.2.1.4
efmCuPme2BMinDataRate r/w KbpsUnsigned32 .1.3.6.1.2.1.167.1.2.5.2.1.5
efmCuPme2BMaxDataRate r/w KbpsUnsigned32 .1.3.6.1.2.1.167.1.2.5.2.1.6
efmCuPme2BPower r/w 0.5 dBmUnsigned32 .1.3.6.1.2.1.167.1.2.5.2.1.7
efmCuPme2BConstellation r/w Enumeration .1.3.6.1.2.1.167.1.2.5.2.1.8
efmCuPme2BProfileRowStatus r/w SNMPv2-TCRowStatus .1.3.6.1.2.1.167.1.2.5.2.1.9
efmCuPme2BsModeTable .1.3.6.1.2.1.167.1.2.5.3
efmCuPme2BsModeEntry efmCuPme2BsModeIndex .1.3.6.1.2.1.167.1.2.5.3.1
efmCuPme2BsModeIndex EfmProfileIndex .1.3.6.1.2.1.167.1.2.5.3.1.1
efmCuPme2BsModeDescr r/w SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.2.1.167.1.2.5.3.1.2
efmCuPme2BsModeRowStatus r/w SNMPv2-TCRowStatus .1.3.6.1.2.1.167.1.2.5.3.1.3
efmCuPme2BReachRateTable .1.3.6.1.2.1.167.1.2.5.4
efmCuPme2BReachRateEntry efmCuPme2BsModeIndexefmCuPme2BReachRateIndex .1.3.6.1.2.1.167.1.2.5.4.1
efmCuPme2BReachRateIndex EfmProfileIndex .1.3.6.1.2.1.167.1.2.5.4.1.1
efmCuPme2BEquivalentLength r/w mUnsigned32 .1.3.6.1.2.1.167.1.2.5.4.1.2
efmCuPme2BMaxDataRatePam16 r/w KbpsUnsigned32 .1.3.6.1.2.1.167.1.2.5.4.1.3
efmCuPme2BMaxDataRatePam32 r/w KbpsUnsigned32 .1.3.6.1.2.1.167.1.2.5.4.1.4
efmCuPme2BReachRateRowStatus r/w SNMPv2-TCRowStatus .1.3.6.1.2.1.167.1.2.5.4.1.5
efmCuPme10P .1.3.6.1.2.1.167.1.2.6
efmCuPme10PProfileTable .1.3.6.1.2.1.167.1.2.6.1
efmCuPme10PProfileEntry efmCuPme10PProfileIndex .1.3.6.1.2.1.167.1.2.6.1.1
efmCuPme10PProfileIndex EfmProfileIndex .1.3.6.1.2.1.167.1.2.6.1.1.1
efmCuPme10PProfileDescr r/w SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.2.1.167.1.2.6.1.1.2
efmCuPme10PBandplanPSDMskProfile r/w Enumeration .1.3.6.1.2.1.167.1.2.6.1.1.3
efmCuPme10PUPBOReferenceProfile r/w Enumeration .1.3.6.1.2.1.167.1.2.6.1.1.4
efmCuPme10PBandNotchProfiles r/w Bits .1.3.6.1.2.1.167.1.2.6.1.1.5
efmCuPme10PPayloadDRateProfile r/w Enumeration .1.3.6.1.2.1.167.1.2.6.1.1.6
efmCuPme10PPayloadURateProfile r/w Enumeration .1.3.6.1.2.1.167.1.2.6.1.1.7
efmCuPme10PProfileRowStatus r/w SNMPv2-TCRowStatus .1.3.6.1.2.1.167.1.2.6.1.1.8
efmCuPme10PStatusTable .1.3.6.1.2.1.167.1.2.6.2
efmCuPme10PStatusEntry IF-MIBifIndex .1.3.6.1.2.1.167.1.2.6.2.1
efmCuPme10PFECCorrectedBlocks SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.2.6.2.1.1
efmCuPme10PFECUncorrectedBlocks SNMPv2-SMICounter32 .1.3.6.1.2.1.167.1.2.6.2.1.2
efmCuConformance .1.3.6.1.2.1.167.2
efmCuGroups .1.3.6.1.2.1.167.2.1
efmCuCompliances .1.3.6.1.2.1.167.2.2
Notifications / Traps (6)
NameOIDDescription
efmCuLowRateCrossing .1.3.6.1.2.1.167.1.1.0.1
This notification indicates that the EFMCu port's data rate
has reached/dropped below or exceeded the low rate threshold,
specified by efmCuThreshLowRate.
          
This notification MAY be sent for the -O subtype ports
(2BaseTL-O/10PassTS-O) while the port is Up, on the crossing
event in both directions: from normal (rate is above the
threshold) to low (rate equals the threshold or below it) and
          
from low to normal.  This notification is not applicable to
the -R subtypes.
          
It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and the notification,
is implemented to prevent simultaneous LinkUp/LinkDown and
efmCuLowRateCrossing notifications to be sent.
          
The adaptive nature of the EFMCu technology allows the port to
adapt itself to the changes in the copper environment, e.g.,
an impulse noise, alien crosstalk, or a micro-interruption may
temporarily drop one or more PMEs in the aggregation group,
causing a rate degradation of the aggregated EFMCu link.
The dropped PMEs would then try to re-initialize, possibly at
a lower rate than before, adjusting the rate to provide
required target SNR margin.
          
Generation of this notification is controlled by the
efmCuLowRateCrossingEnable object.
efmCuPmeLineAtnCrossing .1.3.6.1.2.1.167.1.2.0.1
This notification indicates that the loop attenuation
threshold (as per the efmCuPmeThreshLineAtn
value) has been reached/exceeded for the 2BASE-TL/10PASS-TS
PME.  This notification MAY be sent on the crossing event in
both directions: from normal to exceeded and from exceeded
to normal.
          
It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and the notification,
is implemented to prevent intermittent notifications from
being sent.
          
Generation of this notification is controlled by the
efmCuPmeLineAtnCrossingEnable object.
efmCuPmeSnrMgnCrossing .1.3.6.1.2.1.167.1.2.0.2
This notification indicates that the SNR margin threshold
(as per the efmCuPmeThreshSnrMgn value) has been
reached/exceeded for the 2BASE-TL/10PASS-TS PME.
This notification MAY be sent on the crossing event in
both directions: from normal to exceeded and from exceeded
to normal.
          
It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and the notification,
is implemented to prevent intermittent notifications from
being sent.
          
Generation of this notification is controlled by the
efmCuPmeSnrMgnCrossingEnable object.
efmCuPmeDeviceFault .1.3.6.1.2.1.167.1.2.0.3
This notification indicates that a fault in the PME has been
detected by a vendor-specific diagnostic or a self-test.
          
Generation of this notification is controlled by the
efmCuPmeDeviceFaultEnable object.
efmCuPmeConfigInitFailure .1.3.6.1.2.1.167.1.2.0.4
This notification indicates that PME initialization has
failed, due to inability of the PME link to achieve the
          
requested configuration profile.
          
Generation of this notification is controlled by the
efmCuPmeConfigInitFailEnable object.
efmCuPmeProtocolInitFailure .1.3.6.1.2.1.167.1.2.0.5
This notification indicates that the peer PME was using
an incompatible protocol during initialization.
          
Generation of this notification is controlled by the
efmCuPmeProtocolInitFailEnable object.