efmCuThreshLowRate
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.1.1.1.7
Object
column
r/w
Kbps Unsigned32
This object configures the EFMCu port low-rate crossing alarm
threshold. When the current value of ifSpeed for this port
reaches/drops below or exceeds this threshold, an
efmCuLowRateCrossing notification MAY be generated if enabled
by efmCuLowRateCrossingEnable.
This object is read-write for the -O subtype EFMCu ports
(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
This object MUST be maintained in a persistent manner.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- Kbps
- Parent
- efmCuPortConfEntry
- Table
- efmCuPortConfTable
- Siblings
- 7
Syntax
Kbps Unsigned32
Values & Constraints
Object Constraints
range: 1-100000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPAFAdminState Administrative (desired) state of the PAF of the EFMCu port
(PCS).
When 'disabled', PME aggregation will not be performed by the
PCS. No more than a single PME can be assigned to… | column | Enumeration | .1.3.6.1.2.1.167.1.1.1.1.1 |
| efmCuPAFDiscoveryCode PAF Discovery Code of the EFMCu port (PCS).
A unique 6-octet code used by the Discovery function,
when PAF is supported.
PCS ports incapable of supporting PAF SHALL return a
zero-… | column | OctetString | .1.3.6.1.2.1.167.1.1.1.1.2 |
| efmCuAdminProfile Desired configuration profile(s), common for all PMEs in the
EFMCu port. This object is a list of pointers to entries in
either efmCuPme2BProfileTable or
efmCuPme10PProfileTable,… | column | EfmProfileIndexList | .1.3.6.1.2.1.167.1.1.1.1.3 |
| efmCuTargetDataRate Desired EFMCu port 'net' (as seen across MII) Data Rate in
Kbps, to be achieved during initialization, under spectral
restrictions placed on each PME via efmCuAdminProfile or
… | column | Kbps Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.4 |
| efmCuTargetSnrMgn Desired EFMCu port SNR margin to be achieved on all PMEs
assigned to the port, during initialization. (The SNR margin
is the difference between the desired SNR and … | column | dB Unsigned32 | .1.3.6.1.2.1.167.1.1.1.1.5 |
| efmCuAdaptiveSpectra Indicates how to utilize excess capacity when the copper
environment allows a higher total data rate to be achieved
than that specified by the efmCuTargetDataRate.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.1.1.1.6 |
| efmCuLowRateCrossingEnable Indicates whether efmCuLowRateCrossing notifications should
be generated for this interface.
A value of true(1) indicates that efmCuLowRateCrossing
notification is … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.167.1.1.1.1.8 |