CPQIDA-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
22
Rows
22
Columns
384
.1.3.6.1.4.1.232.3.2.1.1.5
·
1 row entry
·
8 columns
Array Controller Driver Statistics Table.
This is a table of logical drive statistics which are gathered
by the device driver.
Array Controller Driver Statistics Table Entry.
One entry in the driver statistics table. Each entry
represents a logical drive for which the statistics are kept.
One entry in the driver statistics table. Each entry
represents a logical drive for which the statistics are kept.
Indexes
cpqDaNw3xCntlrIndex cpqDaNw3xLogDrvIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaNw3xCntlrIndex
obsolete
Array Controller Index.
This maps the logical drives into their respective controllers. This controller index matches the controller group entries. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.1 |
|
cpqDaNw3xLogDrvIndex
obsolete
Array Logical Drive Index.
This is the logical drive number which keeps track of multiple instances of logical drives which are on the same controller. For each controller index value, the logical drive i… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.2 |
|
cpqDaNw3xTotalReads
obsolete
Array Logical Drive Total Reads.
This shows the total number of reads performed by the IDA device driver to this logical drive. This number is reset each time the device driver is loaded for this logical… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.3 |
|
cpqDaNw3xTotalWrites
obsolete
Array Logical Drive Total Writes.
This shows the total number of writes performed by the IDA device driver to this logical drive. This number is reset each time the device driver is loaded for this logic… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.4 |
|
cpqDaNw3xCorrReads
obsolete
Array Logical Drive Corrected Reads.
This is the total number of read commands sent to the specified logical drive which had to be corrected by fault tolerance. This number is reset each time the device … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.5 |
|
cpqDaNw3xCorrWrites
obsolete
Array Logical Drive Corrected Writes.
This is the total number of write commands sent to the specified logical drive which had to be corrected by fault tolerance. This number is reset each time the devic… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.6 |
|
cpqDaNw3xFatalReads
obsolete
Array Logical Drive Fatal Reads.
This is the total number of read commands sent to the specified logical drive which failed. This number is reset each time the device driver is loaded for this logical dr… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.7 |
|
cpqDaNw3xFatalWrites
obsolete
Array Logical Drive Fatal Writes.
This is the total number of write commands sent to the specified logical drive which failed. This number is reset each time the device driver is loaded for this logical … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.1.1.5.1.8 |
.1.3.6.1.4.1.232.3.2.1.1.6
·
1 row entry
·
3 columns
Volume Map Table.
This is a table of NetWare volumes which map into the
logical drives
Volume Map Table Entry.
One entry in the volume map table. Each entry represents
a logical drive for which the volume map is kept.
One entry in the volume map table. Each entry represents
a logical drive for which the volume map is kept.
Indexes
cpqDaNw3xVolCntlrIndex cpqDaNw3xVolLogDrvIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaNw3xVolCntlrIndex
obsolete
Array Controller Index.
This maps the logical drives into their respective controllers. This controller index matches the controller group entries. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.1.6.1.1 |
|
cpqDaNw3xVolLogDrvIndex
obsolete
Array Logical Drive Index.
This is the logical drive number which keeps track of multiple instances of logical drives which are on the same controller. For each controller index value, the logical drive i… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.1.6.1.2 |
|
cpqDaNw3xVolMap
obsolete
NetWare Volume Map.
This is a data structure containing the volume mappings for this logical drive. There are 8 entries in a volume mapping. Each entry has the following format. An entry can be null indic… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.1.6.1.3 |
.1.3.6.1.4.1.232.3.2.1.4.2
·
1 row entry
·
5 columns
A table of software modules that provide an interface to the device this MIB describes.
A description of a software module that provides an interface
to the device this MIB describes.
to the device this MIB describes.
Indexes
cpqDaOsCommonModuleIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaOsCommonModuleIndex
obsolete
A unique index for this module description.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.4.2.1.1 |
|
cpqDaOsCommonModuleName
obsolete
The module name.
|
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.4.2.1.2 |
|
cpqDaOsCommonModuleVersion
obsolete
The module version in XX.YY format.
Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version. |
OctetString Constraints: range: 0-5 |
.1.3.6.1.4.1.232.3.2.1.4.2.1.3 |
|
cpqDaOsCommonModuleDate
obsolete
The module date.
field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..… |
OctetString Constraints: range: 7-7 |
.1.3.6.1.4.1.232.3.2.1.4.2.1.4 |
|
cpqDaOsCommonModulePurpose
obsolete
The purpose of the module described in this entry.
|
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.1.4.2.1.5 |
.1.3.6.1.4.1.232.3.2.2.1
·
1 row entry
·
43 columns
Array Controller Table.
Array Controller Entry.
Indexes
cpqDaCntlrIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaCntlrIndex
mandatory
Array Controller Index.
This value is a logical number whose meaning is OS dependent. Each physical controller has one unique controller number associated with it. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.1 |
|
cpqDaCntlrModel
mandatory
Array Controller Model.
The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument agent(s). You have a drive array co… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.2 |
|
cpqDaCntlrFWRev
mandatory
Array Controller Firmware Revision.
The firmware revision of the drive array controller. This value can be used to help identify a particular revision of the controller. For B-Series controllers this valu… |
OctetString Constraints: range: 0-5 |
.1.3.6.1.4.1.232.3.2.2.1.1.3 |
|
cpqDaCntlrStndIntr
mandatory
The status of the Standard Interface.
The Standard Interface is how DOS communicates with a drive. The following values are valid for Standard Interface: Other (1) The device driver may n… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.4 |
|
cpqDaCntlrSlot
mandatory
Array Controller Slot.
This identifies the physical slot where the array controller resides in the system. For example, if this value is three, the array controller is located in slot three of your compu… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.2.1.1.5 |
|
cpqDaCntlrCondition
mandatory
The condition of the device. This value represents the overall
condition of this controller, and any associated logical drives, physical drives, and cache modules. |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.6 |
|
cpqDaCntlrProductRev
mandatory
Array Controller Product Revision.
The Product Revision of the drive array controller. This value can be used to further identify a particular revision of the controller model. This will be one characte… |
OctetString Constraints: range: 0-1 |
.1.3.6.1.4.1.232.3.2.2.1.1.7 |
|
cpqDaCntlrPartnerSlot
mandatory
Array Controller Partner Slot.
For duplexed array controllers, this is the slot number of the partner controller. For non-duplexed controllers and partner controllers that reside in a separate host syst… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.8 |
|
cpqDaCntlrCurrentRole
mandatory
Array Controller Current Role.
For duplexed array controllers, this is the controllers current role. The following values are valid: other (1) Indicates that the instrument agent does no… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.9 |
|
cpqDaCntlrBoardStatus
mandatory
Array Controller Board Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the status of the controller. You may need to upgrade th… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.10 |
|
cpqDaCntlrPartnerBoardStatus
mandatory
Array Controller Partner Board Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the status of the controller. You may need to up… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.11 |
|
cpqDaCntlrBoardCondition
mandatory
The condition of the device. This value represents the
condition of the controller and any associated cache modules. |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.12 |
|
cpqDaCntlrPartnerBoardCondition
mandatory
The condition of the device. This value represents the
condition of the controller and any associated cache modules. |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.13 |
|
cpqDaCntlrDriveOwnership
mandatory
Array Controller Drive Ownership.
For duplexed controllers, indicates to which controller slot the shared devices are associated. The following values are valid: other (1) … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.14 |
|
cpqDaCntlrSerialNumber
mandatory
Array Controller Serial Number.
The serial number of the array controller. This field will be a null (size 0) string if the controller does not support serial number. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.232.3.2.2.1.1.15 |
|
cpqDaCntlrRedundancyType
mandatory
Array Controller Redundancy Type.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy type of the controller. You may need t… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.16 |
|
cpqDaCntlrRedundancyError
mandatory
Array Controller Redundancy Error.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy error of the controller. You may need… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.17 |
|
cpqDaCntlrAccessModuleStatus
mandatory
Array Controller RAID ADG Enabler Module Status.
The following values are valid: other (1) Indicates that the agent does not recognize the RAID ADG Enabler Module status. You may need … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.18 |
|
cpqDaCntlrDaughterBoardType
mandatory
Array Controller Daughter Board Type.
The following values are valid: other (1) Indicates that the agent does not recognize the daughter board type. You may need to upgrade the agent. … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.19 |
|
cpqDaCntlrHwLocation
mandatory
A text description of the hardware location of the controller.
A NULL string indicates that the hardware location could not be determined or is irrelevant. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.2.1.1.20 |
|
cpqDaCntlrNumberOfBuses
mandatory
Array Controller Number of Buses.
This value is the number of SCSI buses on the controller. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.21 |
|
cpqDaCntlrBlinkTime
mandatory
Controller Physical Drive Blink Time Count.
The controller blink time variable allows the drive tray LEDs of all physical drives attached to this controller to blink. This value indicates the amount of ti… |
RFC1155-SMICounterr/w Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.2.1.1.22 |
|
cpqDaCntlrRebuildPriority
mandatory
Array Controller Rebuild Priority.
This is the controller`s rebuild priority. The following values are valid: other (1) Indicates that the instrument agent does not recognize the rebui… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.23 |
|
cpqDaCntlrExpandPriority
mandatory
Array Controller Expand Priority.
This is the controller`s expand priority. The following values are valid: other (1) Indicates that the instrument agent does not recognize the expand … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.24 |
|
cpqDaCntlrNumberOfInternalPorts
mandatory
Array Controller Number of Internal Ports.
This value is the number of internal connectors on the controller. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.25 |
|
cpqDaCntlrNumberOfExternalPorts
mandatory
Array Controller Number of External Ports.
This value is the number of external connectors on the controller. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.26 |
|
cpqDaCntlrDriveWriteCacheState
mandatory
Array Controller Drive Write Cache State.
This is the controller`s drive write cache setting. The following values are valid: other (1) Indicates that the instrument agent does not recog… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.27 |
|
cpqDaCntlrPartnerSerialNumber
mandatory
Array Controller Partner Serial Number.
The serial number of the partner array controller. This field will be a null (size 0) string if the partner controller does not support serial number or in the abs… |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.232.3.2.2.1.1.28 |
|
cpqDaCntlrOptionRomRev
mandatory
Array Controller Option ROM Revision.
The option ROM revision of the chipset or HBA being used by the B-Series controller. If the controller does not support the option ROM revision, the agents will retu… |
OctetString Constraints: range: 0-5 |
.1.3.6.1.4.1.232.3.2.2.1.1.29 |
|
cpqDaCntlrHbaFWRev
mandatory
Array Controller HBA Firmware Revision.
The firmware revision of the chipset or HBA being used by the B-Series controller. If the controller does not support the HBA firmware revision, the agents will re… |
OctetString Constraints: range: 0-17 |
.1.3.6.1.4.1.232.3.2.2.1.1.30 |
|
cpqDaCntlrHBAModeOptionRomRev
mandatory
Array Controller HBA Mode Option Rom Revision.
The revision of option ROM that would run on this chipset or HBA (being used by the B-Series controller), if it were to run in HBA mode. If the controller do… |
OctetString Constraints: range: 0-17 |
.1.3.6.1.4.1.232.3.2.2.1.1.31 |
|
cpqDaCntlrCurrentTemp
mandatory
Array Controller Current Temperature.
This is the temperature of the array controller in degrees Celsius. The field will contain -1 if the controller temperature cannot be calculated or if the controll… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.32 |
|
cpqDaCntlrLastLockupCode
mandatory
Array Controller Last Lockup Code.
The lockup code of the array controller if a lockup occurred prior to the last controller reset. This value will be nonzero if the controller supports last lockup code… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.1.1.33 |
|
cpqDaCntlrEncryptionStatus
mandatory
Array Controller Encryption Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to upgrade the instrument ag… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.34 |
|
cpqDaCntlrASICEncptSelfTestStatus
mandatory
Array Controller ASIC Encryption Self Test Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to upgrade th… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.35 |
|
cpqDaCntlrEncryptCspNvramStatus
mandatory
Array Controller Encryption Critical Security Parameter NVRAM Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.36 |
|
cpqDaCntlrEncryptCryptoOfficerPwdSetStatus
mandatory
Array Controller Encryption Crypto Officer Password Set Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.37 |
|
cpqDaCntlrEncryptCntlrPwdSetStatus
mandatory
Array Controller Encryption Controller Password Set Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to u… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.38 |
|
cpqDaCntlrEncryptCntlrPwdAvailStatus
mandatory
Array Controller Encryption Controller Password Availability Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.39 |
|
cpqDaCntlrUnencryptedLogDrvCreationPolicy
mandatory
Array Controller Unencrypted Logical Drive Creation Policy.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to u… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.40 |
|
cpqDaCntlrEncryptedLogDrvCreationPolicy
mandatory
Array Controller Encrypted Logical Drive Creation Policy.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to upg… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.41 |
|
cpqDaCntlrEncryptFWLockStatus
mandatory
Array Controller Encryption Firmware Lock Status.
The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to upgrade the… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.42 |
|
cpqDaCntlrOperatingMode
mandatory
Array Controller Operating Mode.
The array controller`s current operating mode. The following values are valid: The following values are valid: other (1) Indicates that th… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.43 |
.1.3.6.1.4.1.232.3.2.2.2
·
1 row entry
·
20 columns
Cache Module Board Table. Note that for some controller models, a cache module board that physically attaches to the controller or chipset may not be an available option. For these configurations, the Instrument Agent will continue to populate variables that are related to read caching operations.
Cache Module Board Entry.
Indexes
cpqDaAccelCntlrIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaAccelCntlrIndex
mandatory
Cache Module Board Controller Index.
This value is a logical number whose meaning is OS dependent. The value has a direct mapping to the controller table index such that controller `i` has cache module ta… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.1 |
|
cpqDaAccelStatus
mandatory
Cache Module/Operations Status.
This describes the status of the cache module and/or cache operations. Note that for some controller models, a cache module board that physically attaches t… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.2 |
|
cpqDaAccelMemory
mandatory
Write Cache Memory.
This shows the amount of memory allocated for the write cache in kilobytes. Because data is kept in duplicate (mirrored), the actual amount of usable memory is half the amount shown. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.3 |
|
cpqDaAccelBadData
mandatory
Cache Module Board Bad Data.
The following values are valid: None (2) Indicates that no data loss occurred. The battery packs were properly charged when the system was initialized. … |
Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.4 |
|
cpqDaAccelErrCode
mandatory
Cache Module Board Error Code.
Use this to determine the status of the write cache operations. The status can be: Other (1) Indicates that the instrument agent does not rec… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.5 |
|
cpqDaAccelBattery
mandatory
Cache Module Board Backup Power Status.
This monitors the status of each backup power source on the board. The backup power source can only recharge when the system has power applied. The type of backu… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.6 |
|
cpqDaAccelReadErrs
mandatory
Cache Module Board Read Errors.
This shows the total number of read memory parity errors that were detected while reading from the Cache Module board. The mirrored copy of data on the board can be accesse… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.2.2.1.7 |
|
cpqDaAccelWriteErrs
mandatory
Cache Module Board Write Errors.
This shows the total number of write memory parity errors that were detected while writing to the Cache Module board. Write parity errors occur when the sys… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.2.2.1.8 |
|
cpqDaAccelCondition
mandatory
The condition of the device. This value represents the overall
condition of this cache module. |
Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.9 |
|
cpqDaAccelReadMemory
mandatory
Read Cache Memory.
This shows the amount of memory allocated for the read cache in kilobytes. Because data is kept in duplicate (mirrored), the actual amount of usable memory is half the amount shown. … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.10 |
|
cpqDaAccelSerialNumber
mandatory
Cache Module Serial Number.
The serial number of the Cache Module. This field will be a null (size 0) string if the cache module does not support serial number. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.232.3.2.2.2.1.11 |
|
cpqDaAccelTotalMemory
mandatory
Total Cache Memory.
This value is the total amount of cache module memory in kilobytes, including both battery-backed and non-battery-backed memory. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.12 |
|
cpqDaAccelReadCachePercent
mandatory
Read Cache Percent.
This shows the percent of cache memory allocated for read ahead caching. If the data cannot be determined or is not applicable, the value is set to 4,294,967,295. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.2.2.1.13 |
|
cpqDaAccelWriteCachePercent
mandatory
Write Cache Percent.
This shows the percent of cache memory allocated for posted write caching. If the data cannot be determined or is not applicable, the value is set to 4,294,967,295. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.2.2.1.14 |
|
cpqDaAccelFailedBatteries
mandatory
Cache Module Failed Batteries.
This lists the location of cache module failed batteries. Each octet present contains the position number of a failed battery. An octet string of length zero indicates that… |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.232.3.2.2.2.1.15 |
|
cpqDaAccelBackupPowerSource
mandatory
Cache Module Board Backup Power Source.
This describes the backup power source being used by the Cache Module board. The status can be: Other (1) Indicates that the instrum… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.16 |
|
cpqDaAccelBoardCurrentTemp
mandatory
Cache Module Board Current Temperature.
This is the temperature of the cache module board in degrees Celsius. The field will contain -1 if the cache module board temperature cannot be calculated or if th… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.17 |
|
cpqDaAccelCapacitorCurrentTemp
mandatory
Cache Module Capacitor Current Temperature.
This is the temperature of the Super-Cap in degrees Celsius. The field will contain -1 if the Super-Cap temperature cannot be calculated or if the controller do… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.18 |
|
cpqDaAccelMemoryDataWidth
mandatory
Cache Memory Data Width.
This is the memory data width (in bits), for the attached cache module. The field will contain -1 if the memory data width cannot be calculated or if the controller does not supp… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.19 |
|
cpqDaAccelMemoryTransferRate
mandatory
Cache Memory Transfer Rate.
This is the memory transfer rate in megatransfers per second (MT/s), for the attached cache module . The field will contain -1 if the memory transfer rate cannot be calculate… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.2.1.20 |
.1.3.6.1.4.1.232.3.2.2.3
·
1 row entry
·
9 columns
Drive Array Managed Cable Table.
Drive Array Managed Cable Entry.
Indexes
cpqDaManagedCableCntlrIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaManagedCableIndex
mandatory
Managed Cable Index.
This index identifies a controller and managed cable association. This index uniquely identifies a single managed cable connected to a controller. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.3.1.1 |
|
cpqDaManagedCableCntlrIndex
mandatory
Managed Cable Controller Index.
This value maps the managed cables into their respective controllers. This value is a logical number whose meaning is OS dependent. The value has a direct mapping to the c… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.3.1.2 |
|
cpqDaManagedCableHostConnector
mandatory
Managed Cable Host Connector.
This is the port connector to which the managed cable is attached. If the host connector cannot be determined, the agent will return a NULL string. |
OctetString Constraints: range: 0-4 |
.1.3.6.1.4.1.232.3.2.2.3.1.3 |
|
cpqDaManagedCableStatus
mandatory
Managed Cable Status.
The following values are defined: Other (1) Indicates that the instrument agent can not determine the managed cable status. Ok (2) Indicates the c… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.3.1.4 |
|
cpqDaManagedCableFaultCode
mandatory
Managed Cable Fault Code.
The following values are defined: Other (1) Indicates that the instrument agent can not determine the managed cable fault code. None (2) Indic… |
Enumeration | .1.3.6.1.4.1.232.3.2.2.3.1.5 |
|
cpqDaManagedCableVendorRevision
mandatory
Managed Cable Vendor Revision.
Indicates the vendor revision of the managed cable. If the managed cable does not support vendor revision, the instrument agent will return a NULL string. |
OctetString Constraints: range: 0-2 |
.1.3.6.1.4.1.232.3.2.2.3.1.6 |
|
cpqDaManagedCableVendorSerialNumber
mandatory
Managed Cable Vendor Serial Number.
Indicates the vendor serial number of the managed cable. If the managed cable does not support vendor serial number, the instrument agent will return a NULL string. |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.232.3.2.2.3.1.7 |
|
cpqDaManagedCableVendorPartNumber
mandatory
Managed Cable Vendor Part Number.
Indicates the vendor part number of the managed cable. If the managed cable does not support vendor part number, the instrument agent will return a NULL string. |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.232.3.2.2.3.1.8 |
|
cpqDaManagedCableLength
mandatory
Managed Cable Length.
Indicates the length of the managed cable in meters. This field will contain -1 if the cable length cannot be determined or if the managed cable does not support reporting cable len… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.2.3.1.9 |
.1.3.6.1.4.1.232.3.2.3.1
·
1 row entry
·
25 columns
Drive Array Logical Drive Table.
A table of logical drive entries.
Drive Array Logical Drive Entry.
A logical drive entry.
A logical drive entry.
Indexes
cpqDaLogDrvCntlrIndex cpqDaLogDrvIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaLogDrvCntlrIndex
mandatory
Drive Array Logical Drive Controller Index.
This maps the logical drives into their respective controllers. Controller index `i` under the controller group owns the associated drives in the logical drive … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.1.1.1 |
|
cpqDaLogDrvIndex
mandatory
Drive Array Logical Drive Index.
This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controller index value, the logical drive index s… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.1.1.2 |
|
cpqDaLogDrvFaultTol
mandatory
Logical Drive Fault Tolerance.
This shows the fault tolerance mode of the logical drive. The following values are valid for the Logical Drive Fault Tolerance: None (2) Fault tolerance is … |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.3 |
|
cpqDaLogDrvStatus
mandatory
Logical Drive Status.
The logical drive can be in one of the following states: Ok (2) Indicates that the logical drive is in normal operation mode. Failed (3) Indicates t… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.4 |
|
cpqDaLogDrvAutoRel
mandatory
Array Controller Logical Drive Auto-Reliability Delay.
This value indicates how many seconds the logical drive will wait with no requests before beginning Auto-Reliability monitoring. For example, the def… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.232.3.2.3.1.1.5 |
|
cpqDaLogDrvRebuildBlks
obsolete
Logical Drive Rebuild Blocks Remaining.
After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value shows how many blocks of data still need to be rebuilt. … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.3.1.1.6 |
|
cpqDaLogDrvHasAccel
mandatory
Logical Drive Has Cache Module Board.
This indicates whether the logical drive has a Cache Module board configured and enabled. The following values are valid: Other (1) Indicates that t… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.7 |
|
cpqDaLogDrvAvailSpares
obsolete
Drive Array Logical Drive Available Spares.
This indicates if this logical drive has one or more spares designated for it that are not currently in use by another drive. Each octet present will be a physi… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.1.1.8 |
|
cpqDaLogDrvSize
mandatory
Logical Drive Size.
This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as … |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.232.3.2.3.1.1.9 |
|
cpqDaLogDrvPhyDrvIDs
obsolete
Drive Array Logical Drive Physical Drive IDs.
This lists the physical drive IDs which are associated with this logical drive. These are the same IDs which can be used as indices into the physical drive ta… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.1.1.10 |
|
cpqDaLogDrvCondition
mandatory
The Logical Drive condition.
This value represents the overall condition of this logical drive and any associated physical drives. |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.11 |
|
cpqDaLogDrvPercentRebuild
mandatory
Logical Drive Percent Rebuild.
After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value is the percent complete of the rebuild. When the value reaches 1… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.3.1.1.12 |
|
cpqDaLogDrvStripeSize
mandatory
Logical Drive Stripe Size.
This is the size of a logical drive stripe in kilobytes. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.1.1.13 |
|
cpqDaLogDrvOsName
mandatory
Logical Drive OS Name.
The OS name for this array logical drive. This field will be a null (size 0) string if the agent does not support OS name. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.1.1.14 |
|
cpqDaLogDrvBlinkTime
mandatory
Logical Drive Physical Drive Blink Time Count.
The logical drive blink time variable allows the drive tray LEDs of all physical drives in a logical drive to blink. This value indicates the amount of time… |
RFC1155-SMICounterr/w Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.3.1.1.15 |
|
cpqDaLogDrvSpareReplaceMap
obsolete
Logical Drive Spare To Replacement Drive Map.
This data structure contains the spare to physical drive replacement map. The format is: octet contents ===== ======== 1 Spare dr… |
OctetString Constraints: range: 0-256 |
.1.3.6.1.4.1.232.3.2.3.1.1.16 |
|
cpqDaLogDrvRebuildingPhyDrv
mandatory
Logical Drive Physical Drive Rebuilding Index.
This is the physical drive index of the physical drive that is currently rebuilding. If the value cannot be determined or is not applicable, the value is se… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.1.1.17 |
|
cpqDaLogDrvMultipathAccess
mandatory
Logical Drive Multi-path Access.
This indicates whether all the physical disks including spares of this logical drive have been configured to have and currently still have more than one I/O path to the co… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.18 |
|
cpqDaLogDrvNmbrOfParityGroups
mandatory
Logical Drive Number Of Parity Groups.
Indicates the number of parity groups (i.e. RAID 4/5/6 subvolumes), that are being striped across. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.232.3.2.3.1.1.19 |
|
cpqDaLogDrvSplitMirrorBackupLogDrv
mandatory
Logical Drive Split Mirror Backup Logical Drive.
Indicates if this logical drive is a backup logical drive belonging to a split mirror. The following values are defined: othe… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.20 |
|
cpqDaLogDrvCacheVolAccelAssocType
mandatory
Logical Drive Cache Volume Accelerator Association Type.
Indicates the way in which this logical drive is associated with a cache volume accelerator group. The following values are defined… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.21 |
|
cpqDaLogDrvCacheVolIndex
mandatory
Logical Drive Cache Volume Index.
The logical drive index of the cache volume used by this logical drive. The value of this index is the same as the logical drive index used in the cache volume accelerat… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.1.1.22 |
|
cpqDaLogDrvRPIPercentComplete
mandatory
Logical Drive Rapid Parity Initialization Percent Complete.
When a fault tolerant logical volume is created, parity data for the volume must be initialized. This value is the percent complete of the rapid… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.3.1.1.23 |
|
cpqDaLogDrvSSDSmartPathStatus
mandatory
Logical Drive SSD Smart Path Status.
Indicates the logical drive SSD Smart Path status. An SSD Smart Path for a logical drive can be utilized only when both the Smart Array firmware and Smart Array contro… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.24 |
|
cpqDaLogDrvEncryptionStatus
mandatory
Logical Drive Encryption Status.
Indicates the logical drive encryption status. The following values are defined: Other (1) Indicates that the instrument agent can not … |
Enumeration | .1.3.6.1.4.1.232.3.2.3.1.1.25 |
.1.3.6.1.4.1.232.3.2.3.2
·
1 row entry
·
4 columns
Drive Array Logical Drive Physical Drive Extended Attachment
Table.
A table of logical drives and their associated physical drives.
Drive Array Logical Drive Extended Physical Drive Attachment
Entry.
Entry.
Indexes
cpqDaLogDrvPhyDrvAttachExtIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaLogDrvPhyDrvAttachExtIndex
mandatory
Drive Array Logical Drive Extended Attach Index.
This index identifies a controller, logical drive and physical drive connection. This index uniquely identifies a connection for each attached hard drive. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.2.1.1 |
|
cpqDaLogDrvCntlrExtended
mandatory
Drive Array Logical Drive Controller Extended.
This maps the logical drives into their respective controllers. This value is a logical number whose meaning is OS dependent. The value has a direct mapping … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.2.1.2 |
|
cpqDaLogDrvLogDrvExtended
mandatory
Drive Array Logical Drive Extended.
This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controller value, the logical drive value star… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.2.1.3 |
|
cpqDaLogDrvPhyDrvExtended
mandatory
Drive Array Logical Drive Physical Drive Extended.
This value is used for selecting the physical drive number in the table entry. This number keeps track of multiple instances of physical drives which are… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.2.1.4 |
.1.3.6.1.4.1.232.3.2.3.3
·
1 row entry
·
5 columns
Drive Array Logical Drive Spare Replacement Extended Attachment
Table.
A table of logical drives, physical drives and their replacement
drives. If spare drives are not used, this table will not be
populated.
Drive Array Logical Drive Spare Replacement Extended Attachment
Entry.
Entry.
Indexes
cpqDaLogDrvSprRplcAttachExtIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaLogDrvSprRplcAttachExtIndex
mandatory
Drive Array Logical Drive Spare Replacment Extended Attach Index.
This index uniquely identifies a controller, logical drive, physical drive and replacement drive connection. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.3.1.1 |
|
cpqDaLogDrvSprRplcCntlrExtended
mandatory
Drive Array Logical Drive Spare Replacement Controller Extended.
This value maps the spare replacement drives into their respective controllers. This value is a logical number whose meaning is OS depend… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.3.1.2 |
|
cpqDaLogDrvSprRplcLogDrvExtended
mandatory
Drive Array Logical Drive Spare Replace Logical Drive Extended.
This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controller value, … |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.3.1.3 |
|
cpqDaLogDrvSprRplcReplacedPhysDrvExtended
mandatory
Drive Array Logical Drive Spare Replace Replaced Physical
Drive Extended. This is the replaced drive physical drive number. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.3.1.4 |
|
cpqDaLogDrvSprRplcSparePhysDrvExtended
mandatory
Drive Array Logical Drive Spare Replace Spare Physical
Drive Extended. This is the replacement spare physical drive number. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.3.1.5 |
.1.3.6.1.4.1.232.3.2.3.4
·
1 row entry
·
4 columns
Drive Array Logical Drive Available Spare Extended Attachment
Table.
A table of logical drives and their available spare drives. This
table indicates when a logical drive has one or more spare drives
designated for it. This table will not be populated when available
spares are not being used.
Drive Array Logical Drive Available Spare Extended Attachment
Entry.
Entry.
Indexes
cpqDaLogDrvAvailSprAttachExtIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaLogDrvAvailSprAttachExtIndex
mandatory
Drive Array Logical Drive Available Spare Extended Attach Index.
This index uniquely identifies a controller, logical drive and available spare drive connection. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.4.1.1 |
|
cpqDaLogDrvAvailSprCntlrExtended
mandatory
Drive Array Logical Drive Available Spare Controller Extended.
This value maps the available spare drives into their respective controllers This value is a logical number whose meaning is OS dependent. … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.4.1.2 |
|
cpqDaLogDrvAvailSprLogDrvExtended
mandatory
Drive Array Logical Drive Available Spare Logical Drive Extended.
This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controller value… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.3.4.1.3 |
|
cpqDaLogDrvAvailSprAvailableSpareExtended
mandatory
Drive Array Logical Drive Available Spare Available Spare Extended.
This is the available spare drive number assigned to one or more logical drives. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.3.4.1.4 |
.1.3.6.1.4.1.232.3.2.3.5
·
1 row entry
·
33 columns
Drive Array Logical Drive Cache Volume Accelerator Table.
The cpqDaLogDrvCacheVolumeAccelTable table contains configuration
and statistical information about cache volumes. This table will not
be populated when logical drive cache volumes are not being used.
Drive Array Logical Drive Cache Volume Accelerator Entry.
A cache volume entry.
A cache volume entry.
Indexes
cpqDaLogDrvCacheVolAccelCntlrIndex cpqDaLogDrvCacheVolAccelLogDrvIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaLogDrvCacheVolAccelCntlrIndex
mandatory
Drive Array Logical Drive Cache Volume Accelerator Controller Index.
This index maps the cache volume back to the controller to which it is attached. The value of this index is the same as the index used… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.1 |
|
cpqDaLogDrvCacheVolAccelLogDrvIndex
mandatory
Drive Array Logical Drive Cache Volume Accelerator Logical Drive
Index. The logical drive index for this cache volume. The value of this index is the same as the logical drive index used in the logical … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.2 |
|
cpqDaLogDrvCacheVolAccelCachingAlgorithm
mandatory
Drive Array Logical Drive Cache Volume Accelerator Caching Algorithm.
The caching algorithm currently in use for the cache volume. The following values are defined: Other(1) … |
Enumeration | .1.3.6.1.4.1.232.3.2.3.5.1.3 |
|
cpqDaLogDrvCacheVolAccelCacheState
mandatory
Drive Array Logical Drive Cache Volume Accelerator Cache State.
The current cache state of the cache volume. The following values are defined: Other(1) The instrument agent… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.5.1.4 |
|
cpqDaLogDrvCacheVolAccelWritePolicy
mandatory
Drive Array Logical Drive Cache Volume Accelerator Write Policy.
The write policy that the cache volume has been configured to use. The following values are defined: Other(1)… |
Enumeration | .1.3.6.1.4.1.232.3.2.3.5.1.5 |
|
cpqDaLogDrvCacheVolAccelNoOfReadHitsH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Hits (high). cpqDaLogDrvCacheVolAccelNoOfReadHitsH and cpqDaLogDrvCacheVolAccelNoOfReadHits together show the number of read cache … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.6 |
|
cpqDaLogDrvCacheVolAccelNoOfReadHits
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Hits (low). cpqDaLogDrvCacheVolAccelNoOfReadHits and cpqDaLogDrvCacheVolAccelNoOfReadHitsH together show the number of read cache h… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.7 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Do Load (high). cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH and cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad together show t… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.8 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Do Load (low). cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad and cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH together show th… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.9 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Loading (high). cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH and cpqDaLogDrvCacheVolAccelNoOfReadMissLoading together show… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.10 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissLoading
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Loading (low). cpqDaLogDrvCacheVolAccelNoOfReadMissLoading and cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH together show … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.11 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Skip (high). cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH and cpqDaLogDrvCacheVolAccelNoOfReadMissSkip together show the numb… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.12 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissSkip
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Skip (low). cpqDaLogDrvCacheVolAccelNoOfReadMissSkip and cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH together show the numbe… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.13 |
|
cpqDaLogDrvCacheVolAccelReadCacheHitRate
mandatory
Drive Array Logical Drive Cache Volume Accelerator Read Cache
Hit Rate. The rate (percentage) that the read cache for this cache volume is being utilized. If the value cannot be determined or read cache h… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.3.5.1.14 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteHitsH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Hits (high). cpqDaLogDrvCacheVolAccelNoOfWriteHitsH and cpqDaLogDrvCacheVolAccelNoOfWriteHits together show the number of write ca… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.15 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteHits
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Hits (low). cpqDaLogDrvCacheVolAccelNoOfWriteHits and cpqDaLogDrvCacheVolAccelNoOfWriteHitsH together show the number of write cac… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.16 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Do Load (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH and cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad show the num… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.17 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Do Load (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad and cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH show the numb… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.18 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Loading (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH and cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading show the nu… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.19 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Loading (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading and cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH show the num… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.20 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Skip (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH and cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip together show the nu… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.21 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Skip (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip and cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH together show the num… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.22 |
|
cpqDaLogDrvCacheVolAccelWriteCacheHitRate
mandatory
Drive Array Logical Drive Cache Volume Accelerator Write Cache
Hit Rate. The rate (percentage) that the write cache for this cache volume is being utilized. If the value cannot be determined or write cach… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.3.5.1.23 |
|
cpqDaLogDrvCacheVolAccelLoadFailures
mandatory
Drive Array Logical Drive Cache Volume Accelerator Load Failures.
The number of times data failed to load onto this cache volume due to an error. If the value cannot be determined or is not applicable, it… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.24 |
|
cpqDaLogDrvCacheVolAccelCacheLineSize
mandatory
Drive Array Logical Drive Cache Volume Accelerator Cache Line Size.
cpqDaLogDrvCacheVolAccelCacheLineSize is the cache line size in number of blocks. If the value cannot be determined or is not applicab… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.25 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (high). cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH and cpqDaLogDrvCacheVolAccelNoOfReadMissLocked together show the… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.26 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissLocked
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (low). cpqDaLogDrvCacheVolAccelNoOfReadMissLocked and cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH together show the … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.27 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Locked (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH and cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked together show … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.28 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked and cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH together show th… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.29 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Total (high). cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH and cpqDaLogDrvCacheVolAccelNoOfReadMissTotal together show the to… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.30 |
|
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Total (low). cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH together show the tot… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.31 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Total (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH and cpqDaLogDrvCacheVolAccelNoOfWriteMissTotal together show the… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.32 |
|
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotal
mandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Total (low). cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH together show the to… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.3.5.1.33 |
.1.3.6.1.4.1.232.3.2.4.1
·
1 row entry
·
12 columns
Drive Array Spare Table.
A table of spare entries.
Drive Array Spare Entry.
An entry in the spare table.
An entry in the spare table.
Indexes
cpqDaSpareCntlrIndex cpqDaSparePhyDrvIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaSpareCntlrIndex
mandatory
Drive Array Spare Controller Index.
This index maps the spare drive back to the controller to which it is attached. The value of this index is the same as the one used under the controller group. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.4.1.1.1 |
|
cpqDaSparePhyDrvIndex
mandatory
Drive Array Spare Physical Drive Index.
This index maps the spare to the physical drive it represents. The value of this index is the same as the one used with the physical drive table. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.4.1.1.2 |
|
cpqDaSpareStatus
mandatory
Spare Status.
This shows the status of the on-line spare drive. The following values are valid for the spare status: Failed (3) The on-line spare has failed and is no longe… |
Enumeration | .1.3.6.1.4.1.232.3.2.4.1.1.3 |
|
cpqDaSpareReplacedDrv
mandatory
Spare Replaced Drive.
If the spare status is active(6) or building(5), then this has the physical drive number of the replaced drive. Otherwise a value of -1 will be returned. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.4.1.1.4 |
|
cpqDaSpareRebuildBlks
obsolete
Drive Array Spare Number Of Rebuild Blocks Left.
If the spare status is building(5), then this is the number of blocks left to rebuild before completion. The data contained on the failed ph… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.4.1.1.5 |
|
cpqDaSpareCondition
mandatory
The Spare Drive condition.
This value represents the overall condition of this spare drive and any associated physical drives. |
Enumeration | .1.3.6.1.4.1.232.3.2.4.1.1.6 |
|
cpqDaSpareBusNumber
mandatory
Spare Drive SCSI Bus Number.
The bus number indicates to which SCSI bus this spare drive is attached. The first instance is one and increments for each SCSI bus on a controller. A value of -1 will be re… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.4.1.1.7 |
|
cpqDaSpareBay
mandatory
Spare Drive Bay Location.
This value matches the bay location where the physical drive has been installed. For a SCSI drive, this is the SCSI ID of the drive. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.4.1.1.8 |
|
cpqDaSpareReplacedDrvBusNumber
mandatory
Spare Replaced Drive Bus Number.
If the spare status is active(6) or building(5), then this has the physical drive bus number of the replaced drive. If the value cannot be determined or is not applicable,… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.4.1.1.9 |
|
cpqDaSpareReplacedDrvBay
mandatory
Spare Replaced Drive Bay.
If the spare status is active(6) or building(5), then this has the physical drive bay number of the replaced drive. If the value cannot be determined or is not applicable, the va… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.4.1.1.10 |
|
cpqDaSparePercentRebuild
mandatory
Drive Array Spare Percent Rebuild.
If the spare status is building(5), then this is percent complete of of the rebuild. The data contained on the failed physical drive must be reconstructed… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.4.1.1.11 |
|
cpqDaSpareLocationString
mandatory
Spare Drive Location String.
This string describes the location of the drive in relation to the controller. If the location string cannot be determined, the agent will return a NULL string. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.4.1.1.12 |
.1.3.6.1.4.1.232.3.2.5.1
·
1 row entry
·
80 columns
Drive Array Physical Drive Table.
A table of physical drive entries.
Drive Array Physical Drive Entry.
A physical drive entry.
A physical drive entry.
Indexes
cpqDaPhyDrvCntlrIndex cpqDaPhyDrvIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaPhyDrvCntlrIndex
mandatory
Drive Array Physical Drive Controller Index.
This index maps the physical drive back to the controller to which it is attached. The value of this index is the same as the one used under the controller gro… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.1 |
|
cpqDaPhyDrvIndex
mandatory
Drive Array Physical Drive Index.
This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvCntlrIndex uniquely identify a specific physical drive. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.5.1.1.2 |
|
cpqDaPhyDrvModel
mandatory
Physical Drive Model.
This is a text description of the physical drive. The text that appears depends upon who manufactured the drive and the drive type. If a drive fails, note the model t… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.1.1.3 |
|
cpqDaPhyDrvFWRev
mandatory
Physical Drive Firmware Revision.
This shows the physical drive revision number. If the firmware revision is not present, you have not properly initialized the drive array. |
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.232.3.2.5.1.1.4 |
|
cpqDaPhyDrvBay
mandatory
Physical Drive Bay Location.
This value matches the bay location where the physical drive has been installed. For a SCSI drive, this is the SCSI ID of the drive. For a SAS or SATA drive, this is the bay… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.1.1.5 |
|
cpqDaPhyDrvStatus
mandatory
Physical Drive Status.
This shows the status of the physical drive. The following values are valid for the physical drive status: Other (1) Indicates that th… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.6 |
|
cpqDaPhyDrvFactReallocs
mandatory
This shows the number of spare sectors available for
remapping at the time the physical drive was shipped. The physical drive will use these spare sectors for remapping bad sectors that exist on the drive. Not all driv… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.7 |
|
cpqDaPhyDrvUsedReallocs
mandatory
Physical Drive Used Reallocated Sectors.
This shows the number of sectors of the reallocation area that have been used by the physical drive. To see how many sectors were originally availab… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.8 |
|
cpqDaPhyDrvRefHours
mandatory
Reference Time in hours.
This shows the total number of hours that a physical drive has been in operation since the drive was stamped. The drive will have either been stamped when it left the factory or … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.9 |
|
cpqDaPhyDrvHReads
mandatory
Sectors Read (high).
The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk drive during the reference time (phyDrvRefHours). The actual… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.10 |
|
cpqDaPhyDrvReads
mandatory
Sectors Read (low).
The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk drive during the reference time (phyDrvRefHours). The actual … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.11 |
|
cpqDaPhyDrvHWrites
mandatory
Sectors Written (high).
The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the reference hours (phyDrvRefHours). The… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.12 |
|
cpqDaPhyDrvWrites
mandatory
Sectors Written (low).
The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the reference hours (phyDrvRefHours). The … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.13 |
|
cpqDaPhyDrvHSeeks
mandatory
Total Seeks (high).
The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the reference hours (phyDrvRefHours). … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.14 |
|
cpqDaPhyDrvSeeks
mandatory
Total Seeks (low).
The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the reference hours (phyDrvRefHours). … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.15 |
|
cpqDaPhyDrvHardReadErrs
mandatory
Hard Read Errors.
This shows the number of read errors that have occurred on a drive that could not be recovered by a physical drive`s Error Correction Code (ECC) algorithm or through retries during the r… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.16 |
|
cpqDaPhyDrvRecvReadErrs
mandatory
Recovered Read Errors.
This shows the number of read errors corrected through physical drive retries during the reference time (phyDrvRefTime). Over time, all disk drives produce these erro… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.17 |
|
cpqDaPhyDrvHardWriteErrs
mandatory
Hard Write Errors.
This shows the number of write errors that could not be recovered by a physical drive during the reference time (phyDrvRefTime). Over time a disk drive may detect these e… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.18 |
|
cpqDaPhyDrvRecvWriteErrs
mandatory
Recovered Write Errors.
This shows the number of write errors corrected through physical drive retries or recovered by a physical drive during the reference time (phyDrvRefTime). Over time … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.19 |
|
cpqDaPhyDrvHSeekErrs
mandatory
Seek Errors (High).
The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error during the reference hours (phyDrvRefHours). … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.20 |
|
cpqDaPhyDrvSeekErrs
mandatory
Seek Errors (low).
The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error during the reference hours (phyDrvRefHours). The a… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.21 |
|
cpqDaPhyDrvSpinupTime
mandatory
Spin up Time in tenths of seconds.
This is the time it takes for a physical drive to spin up to full speed. Disks require time to gain momentum and reach operating speed. As cars are tested… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.22 |
|
cpqDaPhyDrvFunctTest1
obsolete
Functional Test 1.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing variou… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.23 |
|
cpqDaPhyDrvFunctTest2
obsolete
Functional Test 2.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing variou… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.24 |
|
cpqDaPhyDrvFunctTest3
obsolete
Functional Test 3.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing variou… |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.25 |
|
cpqDaPhyDrvDrqTimeouts
mandatory
DRQ Timeouts.
The number of times that a physical drive continued to request data, but did not get a command completion during the reference time (phyDrvRefTime). This value increases every time a DRQ ti… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.26 |
|
cpqDaPhyDrvOtherTimeouts
mandatory
Other Timeouts.
The number of times that a physical drive did not respond with an interrupt within a controller-defined period of time after a command had been issued during the reference time (phyDrvRefT… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.27 |
|
cpqDaPhyDrvSpinupRetries
mandatory
Spin up Retries.
The number of times that a physical drive had to retry to spin up before successfully achieving operating speed during the reference time (phyDrvRefTime). This value represents the spin-u… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.28 |
|
cpqDaPhyDrvBadRecvReads
mandatory
Recovery Failed (Bad) Read Error.
The number of times a read error occurred while performing Automatic Data Recovery from this physical drive to another drive during the reference time (phyDrvRefTime). … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.29 |
|
cpqDaPhyDrvBadRecvWrites
mandatory
Recovery Failed (Bad) Write Error.
The number of times a write error occurred while performing Automatic Data Recovery from another drive to this physical drive during the reference time (phyDrvRefTime). … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.30 |
|
cpqDaPhyDrvFormatErrs
mandatory
Format Error.
The number of times a format operation failed when the controller attempted to remap a bad sector during the reference time (phyDrvRefTime). Zero indicates that no format errors have occurr… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.31 |
|
cpqDaPhyDrvPostErrs
mandatory
Power On Self Test (Post) Error.
The number of times that a physical drive failed its self test during the reference time (phyDrvRefTime). The physical drive does a self test each time powe… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.32 |
|
cpqDaPhyDrvNotReadyErrs
mandatory
Drive Not Ready Errors.
The number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). When the spin up command was issued, the drive failed … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.33 |
|
cpqDaPhyDrvReallocAborts
mandatory
Physical Drive Reallocation Aborts.
The number of times the physical drive has failed due to an error that occurred when the controller was trying to reallocate a bad sector during the reference time (phy… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.34 |
|
cpqDaPhyDrvThreshPassed
mandatory
Physical Drive Factory Threshold Passed (Exceeded).
When the drive is shipped, certain thresholds have been set to monitor performance of the drives. For example, a threshold might be set for Spin up Tim… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.35 |
|
cpqDaPhyDrvHasMonInfo
mandatory
Physical Drive Has Monitor Information.
All of the physical disk table fields except for the physical disk status (phyDrvStatus) and the bay location (phyDrvBayLocation) are invalid unless this field has … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.36 |
|
cpqDaPhyDrvCondition
mandatory
The condition of the device.
This value represents the overall condition of this physical drive. |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.37 |
|
cpqDaPhyDrvHotPlugs
mandatory
Physical Drive Hot Plug Count.
This value indicates the number of times this physical drive was hot-plugged (removed) from a ProLiant Storage System. This is not supported by the IDA, IDA Expansion, or ID… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.38 |
|
cpqDaPhyDrvMediaErrs
mandatory
Physical Drive Media Failure Count.
This value indicates the number of times this physical drive was failed due to unrecoverable media errors. This is not supported by the IDA, IDA Expansion, or IDA-2 co… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.39 |
|
cpqDaPhyDrvHardwareErrs
mandatory
Physical Drive Hardware Error Count.
This value indicates the number of times this physical drive returned a bad hardware status. The drive may be failed if retries do not work. This is not supported by … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.40 |
|
cpqDaPhyDrvAbortedCmds
mandatory
Physical Drive Aborted Command Failures.
This value indicates the number of times this physical drive was failed due to aborted commands that could not be retried successfully. This is not supported by t… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.41 |
|
cpqDaPhyDrvSpinUpErrs
mandatory
Physical Drive Spin-Up Failure Count.
This value indicates the number of times this physical drive was failed due to a failure of a spin-up command. This is not supported by the IDA, IDA Expansion, or ID… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.42 |
|
cpqDaPhyDrvBadTargetErrs
mandatory
Physical Drive Bad Target Count.
This value indicates the number of times this physical drive performed some action that did not conform to the SCSI-2 bus protocol. These actions will cause the SCSI bus … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.43 |
|
cpqDaPhyDrvLocation
obsolete
Drive Physical Location.
This is the physical location of where the drive is located. The following values are defined: other(1) The location of the drive is not known. int… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.44 |
|
cpqDaPhyDrvSize
mandatory
Physical Drive Size in MB.
This is the size of the physical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.45 |
|
cpqDaPhyDrvBusFaults
mandatory
Physical Drive Bus Fault Count.
This value indicates the number of times that a bus fault was detected for the drive by the controller. This is not supported by the IDA, IDA Expansion, or IDA-2 controlle… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.46 |
|
cpqDaPhyDrvIrqDeglitches
mandatory
Physical Drive IRQ Deglitch Count.
This is not supported by the IDA, IDA Expansion, or IDA-2 controllers. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.47 |
|
cpqDaPhyDrvHotPlug
mandatory
Physical Drive Hot Plug Support Status.
The following values are defined: other(1) The Insight Agent is unable to determine if this drive supports hot plug replacement. h… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.48 |
|
cpqDaPhyDrvPlacement
mandatory
Physical Drive Placement.
The following values are defined: other(1) The agent is unable to determine if the drive is internal or external to the system chassis. internal… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.49 |
|
cpqDaPhyDrvBusNumber
mandatory
Physical Drive SCSI Bus Number.
The bus number indicates to which SCSI bus this physical drive is attached. The first instance is one and increments for each SCSI bus on a controller. A value of -1 will… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.50 |
|
cpqDaPhyDrvSerialNum
mandatory
Physical Drive Serial Number.
This is the serial number assigned to the physical drive. This value is based upon the serial number as returned by the SCSI inquiry command but may have been modified due to… |
OctetString Constraints: range: 0-40 |
.1.3.6.1.4.1.232.3.2.5.1.1.51 |
|
cpqDaPhyDrvPreFailMonitoring
mandatory
Drive Array Physical Drive Predictive Failure Monitoring.
The following values are defined: other(1) The agent is unable to determine if the drive supports predictive failure monitoring… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.52 |
|
cpqDaPhyDrvCurrentWidth
mandatory
Drive Array Physical Drive Current Width.
The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width for this drive. … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.53 |
|
cpqDaPhyDrvCurrentSpeed
mandatory
Drive Array Physical Drive Current Data Transfer Speed.
The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer speed for this d… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.54 |
|
cpqDaPhyDrvFailureCode
mandatory
Drive Array Physical Drive Failure Code.
This value is the drive failure reason code returned by the array firmware. It is valid only when the drive is failed. If the drive is not failed, 0 is returned. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.55 |
|
cpqDaPhyDrvBlinkTime
mandatory
Physical Drive Blink Time Count.
This value indicates the amount of time, in tenths of a second, that the physical drive LEDs will continue to blink. A value of zero indicates the drive LEDs are not blin… |
RFC1155-SMICounterr/w Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.56 |
|
cpqDaPhyDrvSmartStatus
mandatory
Physical Drive S.M.A.R.T Status.
The following values are defined: other(1) The agent is unable to determine if the status of S.M.A.R.T predictive failure monitoring for this drive. … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.57 |
|
cpqDaPhyDrvConfigurationStatus
mandatory
Physical Drive Configuration Status.
The following values are defined: other(1) The agent is unable to determine the configuration status of this physical drive. configur… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.58 |
|
cpqDaPhyDrvRotationalSpeed
mandatory
Drive Array Physical Drive Rotational Speed.
The following values are defined: other(1) The agent is unable to determine the rotational speed for this drive. rpm7200(2) … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.59 |
|
cpqDaPhyDrvType
mandatory
Physical Drive Type.
The following values are defined: other(1) The agent is unable to determine the type for this drive. parallelScsi(2) The drive type is parallel SCSI.… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.60 |
|
cpqDaPhyDrvSataVersion
mandatory
Physical Drive SATA Version.
The following values are defined: other(1) The agent is unable to determine the SATA version for this drive or it is not a SATA drive. sataOn… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.61 |
|
cpqDaPhyDrvHostConnector
mandatory
Physical Drive Host Connector.
This is the host connector to which the drive is ultimately attached. If the host connector cannot be determined, the agent will return a NULL string. |
OctetString Constraints: range: 0-4 |
.1.3.6.1.4.1.232.3.2.5.1.1.62 |
|
cpqDaPhyDrvBoxOnConnector
mandatory
Physical Drive Box on Connector.
The box on connector indicates to which box instance this physical drive belongs. The instances start at one and increment for each box attached to a connector. A value o… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.63 |
|
cpqDaPhyDrvLocationString
mandatory
Physical Drive Location String.
This string describes the location of the drive in relation to the controller. If the location string cannot be determined, the agent will return a NULL string. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.1.1.64 |
|
cpqDaPhyDrvNegotiatedLinkRate
mandatory
Drive Array Physical Drive Negotiated Link Rate.
The following values are defined: other(1) The agent is unable to determine the negotiated link rate this drive or it is not a SAS or SA… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.65 |
|
cpqDaPhyDrvNcqSupport
mandatory
Drive Array Physical Drive Native Command Queueing.
The following values are defined: other(1) The agent is unable to determine the NCQ configuration for this drive or it is not a SATA … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.66 |
|
cpqDaPhyDrvPhyCount
mandatory
Drive Array Physical Drive PHY Count.
This value indicates how many PHYs exist on SAS/SATA disk. For parallel SCSI disks, this value is set to -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.67 |
|
cpqDaPhyDrvMultipathAccess
mandatory
Drive Array Physical Drive Multi-path Access Status.
This indicates if this physical drive has been configured to have and currently still has more than one I/O path to the controller. The following value… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.68 |
|
cpqDaPhyDrvMediaType
mandatory
Drive Array Physical Drive Media Type.
The following values are defined: other(1) The instrument agent is unable to determine the media type of physical drive. … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.69 |
|
cpqDaPhyDrvCurrentTemperature
mandatory
Drive Array Physical Drive Current Temperature.
This is the temperature of the physical drive in degrees Celsius. The field will contain -1 if the drive temperature cannot be calculated or if the contr… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.70 |
|
cpqDaPhyDrvTemperatureThreshold
mandatory
Drive Array Physical Drive Temperature Threshold.
This is the temperature in degrees Celsius at which the drive says it is overheated. The field will contain -1 if the drive temperature threshold cannot … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.71 |
|
cpqDaPhyDrvMaximumTemperature
mandatory
Drive Array Physical Drive Maximum Temperature.
This is the maximum temperature in degrees Celsius that the drive has reached. The field will contain -1 if the maximum drive temperature cannot be calcu… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.72 |
|
cpqDaPhyDrvSSDWearStatus
mandatory
Drive Array Physical Drive Solid State Disk Wear Status.
This shows the wear status of the solid state physical drive. The following values are valid for the physical drive solid state wear… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.73 |
|
cpqDaPhyDrvPowerOnHours
mandatory
Drive Array Physical Drive Power On Hours.
This is the total number of hours that the physical disk has been powered on. This value will be 4,294,967,295 if the disk power on hours cannot be determined … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.74 |
|
cpqDaPhyDrvSSDPercntEndrnceUsed
mandatory
Drive Array Physical Drive Solid State Percent Endurance Used.
This value specifies the hundredths of the percentage of solid state disk life used. The value of this field is allowed to exceed 100%. … |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.75 |
|
cpqDaPhyDrvSSDEstTimeRemainingHours
mandatory
Drive Array Physical Drive Solid State Estimated Time Remaining In
Hours. This is the estimated total number of hours that the solid state physical disk has remaining. This value will be 4,294,967,295 if … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.5.1.1.76 |
|
cpqDaPhyDrvAuthenticationStatus
mandatory
Drive Array Physical Drive Authentication Status.
The following values are defined: Other (1) Indicates that the instrument agent can not determine the physical drive`s authentication s… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.77 |
|
cpqDaPhyDrvSmartCarrierAppFWRev
mandatory
Physical Drive Smart Carrier Application Firmware Revision.
This displays the physical drive smart carrier application firmware revision number. This value will be nonzero if the physical d… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.78 |
|
cpqDaPhyDrvSmartCarrierBootldrFWRev
mandatory
Physical Drive Smart Carrier Bootloader Firmware Revision.
This displays the physical drive smart carrier bootloader firmware revision number. This value will be nonzero if the physical dri… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.1.1.79 |
|
cpqDaPhyDrvEncryptionStatus
mandatory
Physical Drive Encryption Status.
The physical drive`s encryption status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. Y… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.1.1.80 |
.1.3.6.1.4.1.232.3.2.5.2
·
1 row entry
·
15 columns
Drive Array Physical Drive Error Log Table.
A table of physical drive entries. The Error Log Table is not
supported by the IDA, IDA Expansion, or IDA-2 controllers.
Drive Array Physical Drive Entry.
Indexes
cpqDaPhyDrvErrCntlrIndex cpqDaPhyDrvErrIDIndex cpqDaPhyDrvErrIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaPhyDrvErrCntlrIndex
mandatory
Drive Array Physical Drive Error Log Controller Index.
This index maps the physical drive back to the controller to which it is attached. The value of this index is the same as the one used under the cont… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.2.1.1 |
|
cpqDaPhyDrvErrIDIndex
mandatory
Drive Array Physical Drive Error Log Index.
This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvErrCntlrIndex uniquely identify a specific physical driv… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.2 |
|
cpqDaPhyDrvErrIndex
mandatory
Drive Array Physical Drive Error Log Index.
This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvErrCntlrIndex uniquely identify a specific physical driv… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.232.3.2.5.2.1.3 |
|
cpqDaPhyDrvErrType
mandatory
Physical Drive Error Log Error Type.
The type of error in the error log. The valid types are: Other (1) Indicates that the instrument agent does not recognize the type of error in the … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.2.1.4 |
|
cpqDaPhyDrvScsiOp
mandatory
Physical Drive Error Log SCSI Operation.
This is the SCSI Command Operation Code byte associated with the error log entry. For further specifications consult a SCSI-2 logical specification or other SCSI … |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.5 |
|
cpqDaPhyDrvScsiStatus
mandatory
Physical Drive Error Log SCSI Status.
This is the SCSI Status Code byte associated with the error log entry. For further specifications consult a SCSI-2 logical specification or other SCSI reference. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.6 |
|
cpqDaPhyDrvCamStatus
mandatory
Physical Drive Error Log CAM Status.
This is the SCSI CAM Status byte associated with the error log entry. For further specifications consult a SCSI-2 logical specification or other SCSI reference. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.7 |
|
cpqDaPhyDrvSenseKey
mandatory
Physical Drive Error Log Sense Key.
This is the SCSI Sense Key byte associated with the error log entry. For further specifications consult a SCSI-2 logical specification or other SCSI reference. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.8 |
|
cpqDaPhyDrvQualifier
mandatory
Physical Drive Error Log Qualifier.
This is the SCSI Additional Sense Code Qualifier byte (as returned by the Request Sense command) associated with the error log entry. For further specifications consult… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.9 |
|
cpqDaPhyDrvSenseCode
mandatory
Physical Drive Error Log Sense Code.
This is the SCSI Sense Code associated with the error log entry. For further specifications consult a SCSI-2 logical specification or other SCSI reference. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.10 |
|
cpqDaPhyDrvBlockValid
mandatory
Physical Drive Error Log Block Address Is Valid.
The valid values are: False (1) Indicates that the Block Address object (cpqDaPhyDrvBlock) is not a valid address. True (… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.2.1.11 |
|
cpqDaPhyDrvBlock
mandatory
Physical Drive Error Log Block Address.
This is the SCSI Block Address (as returned by the Request Sense Command) associated with the error log entry. For further specifications consult a SCSI-2 logical … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.2.1.12 |
|
cpqDaPhyDrvTime
mandatory
Physical Drive Error Log Reference Time.
This gives a relative time stamp as to when the error log entry occurred. The Reference Time shows the number of hours that a physical drive has been spinning sin… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.232.3.2.5.2.1.13 |
|
cpqDaPhyDrvUserDesc
obsolete
Physical Drive Error Log User Description.
This is a string built by the agent which contains the Reference Time (cpqDaPhyDrvTime) and a brief description of the disk error associated with the particular … |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.2.1.14 |
|
cpqDaPhyDrvErrDesc
mandatory
The index used to display an error associated with a physical drive.
This number refers to an entry in a list of error strings enumerating the possible physical drive errors associated with a particular p… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.2.1.15 |
.1.3.6.1.4.1.232.3.2.5.3
·
1 row entry
·
8 columns
Drive Array Physical Drive Access Path Table.
A table of access path entries supporting physical drive multi-path
cabling configuration.
Drive Array Physical Drive Access Path Entry.
Indexes
cpqDaPhyDrvPathCntlrIndex cpqDaPhyDrvPathDrvIndex cpqDaPhyDrvPathIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaPhyDrvPathCntlrIndex
mandatory
Drive Array Physical Drive Access Path Controller Index.
This index maps the physical drive access path back to the controller to which it is attached. The value of this index is the same as the one used … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.3.1.1 |
|
cpqDaPhyDrvPathDrvIndex
mandatory
Drive Array Physical Drive Access Path Drive Index.
This index maps the access path to a physical drive. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.5.3.1.2 |
|
cpqDaPhyDrvPathIndex
mandatory
Drive Array Physical Drive Access Path Index.
This path index keeps track of multiple instances of access paths from a controller to a physical drive. This number, along with the cpqDaPhyDrvPathCntlrIndex… |
Integer32 Constraints: range: 0-3 |
.1.3.6.1.4.1.232.3.2.5.3.1.3 |
|
cpqDaPhyDrvPathStatus
mandatory
Physical Drive Access Path Status.
This shows the status of the physical drive access path. The following values are valid: Other (1) Indicates that the instrument agent can not determin… |
Enumeration | .1.3.6.1.4.1.232.3.2.5.3.1.4 |
|
cpqDaPhyDrvPathCurrentRole
mandatory
Physical Drive Access Path Current Role.
This shows the current role of physical drive access path. The following values are valid: Other (1) Indicates that the instrument agent does not … |
Enumeration | .1.3.6.1.4.1.232.3.2.5.3.1.5 |
|
cpqDaPhyDrvPathHostConnector
mandatory
Physical Drive Access Path Host Connector.
This is the host connector to which the access path is ultimately attached. If the host connector cannot be determined, the agent will return a NULL string. |
OctetString Constraints: range: 0-4 |
.1.3.6.1.4.1.232.3.2.5.3.1.6 |
|
cpqDaPhyDrvPathBoxOnConnector
mandatory
Physical Drive Access Path Box on Connector.
The box on connector indicates to which box instance this physical drive access path belongs. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.5.3.1.7 |
|
cpqDaPhyDrvPathLocationString
mandatory
Physical Drive Access Path Location String.
This string describes the physical drive access path in relation to the controller. If the location string cannot be determined, the agent will return a NULL st… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.5.3.1.8 |
.1.3.6.1.4.1.232.3.2.6.1
·
1 row entry
·
36 columns
Drive Array Physical Drive Threshold Table.
A table of physical drive threshold entries.
Drive Array Physical Drive Threshold Entry.
A physical drive threshold entry.
A physical drive threshold entry.
Indexes
cpqDaPhyDrvThrCntlrIndex cpqDaPhyDrvThrIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaPhyDrvThrCntlrIndex
mandatory
Drive Array Physical Drive Threshold Controller Index.
This index maps the physical drive thresholds back to the controller to which it is attached. The value of this index is the same as the one used und… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.1 |
|
cpqDaPhyDrvThrIndex
mandatory
Drive Array Physical Drive Threshold Index.
This index maps the thresholds to a physical drive. The value of this index is the same as the one used with the physical drive table. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.6.1.1.2 |
|
cpqDaPhyDrvThrUsedReallocs
mandatory
Used Reallocated Sectors Maximum Threshold.
This shows the maximum threshold of the reallocation area that has been used by the physical drive. This threshold is associated with the cpqDaPh… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.3 |
|
cpqDaPhyDrvThrRefHours
mandatory
Reference Time Maximum Threshold in hours.
This shows the maximum threshold in hours that a physical drive has been spinning since the drive was stamped. This threshold is associated with t… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.4 |
|
cpqDaPhyDrvThrHardReadErrs
mandatory
Hard Read Errors Maximum Threshold.
This shows the maximum threshold of read errors on a drive that could not be recovered by a physical drive`s Error Correction Code (ECC) algorithm or through retries du… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.5 |
|
cpqDaPhyDrvThrRecvReadErrs
mandatory
Recovered Read Errors Maximum Threshold.
This shows the maximum threshold of read errors corrected through physical drive retries during the reference time (phyDrvRefTime). This threshold i… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.6 |
|
cpqDaPhyDrvThrHardWriteErrs
mandatory
Hard Write Errors Maximum Threshold.
This shows the maximum threshold of write errors that could not be recovered by a physical drive during the reference time (phyDrvRefTime). This thresho… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.7 |
|
cpqDaPhyDrvThrRecvWriteErrs
mandatory
Recovered Write Errors Maximum Threshold.
This shows the maximum threshold of write errors corrected through physical drive retries or recovered by a physical drive during the reference time (phyDrvRefTim… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.8 |
|
cpqDaPhyDrvThrHSeekErrs
mandatory
Seek Errors Maximum Threshold (high).
The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs together show the maximum threshold of total number of times that the physical disk drive detected a seek e… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.9 |
|
cpqDaPhyDrvThrSeekErrs
mandatory
Seek Errors Maximum Threshold (low).
The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs together show the maximum threshold of total number of times that the physical disk drive detected a seek er… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.10 |
|
cpqDaPhyDrvThrSpinupTime
mandatory
Spin up Time Maximum Threshold in tenths of seconds.
This shows the maximum of time it takes for a physical drive to spin up to full speed. This threshold is associated with the cpqDaPhyDrv… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.11 |
|
cpqDaPhyDrvThrFunctTest1
obsolete
Functional Test 1 Minimum Threshold.
This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dri… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.12 |
|
cpqDaPhyDrvThrFunctTest2
obsolete
Functional Test 2 Minimum Threshold.
This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dri… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.13 |
|
cpqDaPhyDrvThrFunctTest3
obsolete
Functional Test 3 Minimum Threshold.
This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dri… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.14 |
|
cpqDaPhyDrvThrDrqTimeouts
mandatory
DRQ Timeouts Maximum Threshold.
This shows the maximum threshold of the number of times that a physical drive continued to request data, but did not get a command completion during the reference time (phy… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.15 |
|
cpqDaPhyDrvThrOtherTimeouts
mandatory
Other Timeouts Maximum Threshold.
This shows the maximum threshold of the number of times that a physical drive did not respond with an interrupt within a controller-defined period of time after a command… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.16 |
|
cpqDaPhyDrvThrSpinupRetries
mandatory
Spin up Retries Maximum Threshold.
This shows the maximum threshold of the number of times that a physical drive had to retry to spin up before successfully achieving operating speed during the reference … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.17 |
|
cpqDaPhyDrvThrBadRecvReads
mandatory
Recovery Failed (Bad) Read Error Maximum Threshold.
This shows the maximum threshold of the number of times a read error occurred while performing Automatic Data Recovery from this physical drive to anoth… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.18 |
|
cpqDaPhyDrvThrBadRecvWrites
mandatory
Recovery Failed (Bad) Write Error Maximum Threshold.
This shows the maximum threshold of the number of times a write error occurred while performing Automatic Data Recovery from another drive to this phys… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.19 |
|
cpqDaPhyDrvThrFormatErrs
mandatory
Format Error Maximum Threshold.
This shows the maximum threshold of the number of times a format operation failed when the controller attempted to remap a bad sector during the reference time (phyDrvRefTi… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.20 |
|
cpqDaPhyDrvThrPostErrs
mandatory
Power On Self Test (Post) Error Maximum Threshold.
This shows the maximum threshold of the number of times that a physical drive failed its self test during the reference time (phyDrvRefTime). … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.21 |
|
cpqDaPhyDrvThrNotReadyErrs
mandatory
Drive Not Ready Errors Maximum Threshold.
This shows the maximum threshold of the number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.22 |
|
cpqDaPhyDrvThrReallocAborts
mandatory
Physical Drive Reallocation Aborts Maximum Threshold.
This shows the maximum threshold of the number of times the physical drive has failed due to an error that occurred when the controller was trying to … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.23 |
|
cpqDaPhyDrvThrHotPlugs
mandatory
Physical Drive Hot Plug Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can be hot-plugged (removed) from a ProLiant Storage System. Thi… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.24 |
|
cpqDaPhyDrvThrMediaErrs
mandatory
Physical Drive Media Failure Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can be failed due to unrecoverable media errors. This thres… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.25 |
|
cpqDaPhyDrvThrHardwareErrs
mandatory
Physical Drive Hardware Error Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can return a bad hardware status. The drive may be failed if retries do … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.26 |
|
cpqDaPhyDrvThrAbortedCmds
mandatory
Physical Drive Aborted Command Failures Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can be failed due to aborted commands that could not be retried succe… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.27 |
|
cpqDaPhyDrvThrSpinUpErrs
mandatory
Physical Drive Spin-Up Failure Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive was failed due to a failure of a spin-up command. This is not supported … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.28 |
|
cpqDaPhyDrvThrBadTargetErrs
mandatory
Physical Drive Bad Target Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can perform some action that did not conform to the SCSI-2 bus protocol. Thes… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.29 |
|
cpqDaPhyDrvThrViUsedReallocs
mandatory
Used Reallocated Sectors Threshold Has Been Violated.
This is used to indicate whether the number of used sectors of the reallocation area for a physical drive has ever exceeded the maximum allowable thre… |
Enumeration | .1.3.6.1.4.1.232.3.2.6.1.1.30 |
|
cpqDaPhyDrvThrViSpinupTime
mandatory
Spin up Time in tenths of seconds Threshold Has Been Violated.
This is used to indicate whether the time it took for a physical drive to spin up to full speed has ever exceeded the maximum allowable thres… |
Enumeration | .1.3.6.1.4.1.232.3.2.6.1.1.31 |
|
cpqDaPhyDrvThrViFunctTest1
mandatory
Functional Test 1 Threshold Has Been Violated.
This is used to indicate whether the percentage value returned from Functional Test 1 has every dropped below the allowable threshold for that test. … |
Enumeration | .1.3.6.1.4.1.232.3.2.6.1.1.32 |
|
cpqDaPhyDrvThrViFunctTest2
mandatory
Functional Test 2 Threshold Has Been Violated.
This is used to indicate whether the percentage value returned from Functional Test 2 has every dropped below the allowable threshold for that test. … |
Enumeration | .1.3.6.1.4.1.232.3.2.6.1.1.33 |
|
cpqDaPhyDrvThrViFunctTest3
mandatory
Functional Test 3 Threshold Has Been Violated.
This is used to indicate whether the percentage value returned from Functional Test 3 has every dropped below the allowable threshold for that test. … |
Enumeration | .1.3.6.1.4.1.232.3.2.6.1.1.34 |
|
cpqDaPhyDrvThrBusFaults
mandatory
Physical Drive Bus Fault Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can return a bus fault status. The drive may be failed if retries do not work.… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.35 |
|
cpqDaPhyDrvThrIrqDeglitches
mandatory
Physical Drive IRQ Deglitch Count Maximum Threshold.
This shows the maximum threshold of the number of times this physical drive can return a IRQ deglitch status. The drive may be failed if retries do not… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.6.1.1.36 |
.1.3.6.1.4.1.232.3.2.7.1
·
1 row entry
·
7 columns
Drive Array Controller Performance Monitor Table.
A table of controller entries supporting the performance monitor
information.
Drive Array Controller Performance Monitor Entry.
A performance monitor entry.
A performance monitor entry.
Indexes
cpqDaCntlrPerfCntlrIndex cpqDaCntlrPerfInstance
| Column | Syntax | OID |
|---|---|---|
|
cpqDaCntlrPerfCntlrIndex
mandatory
Drive Array Controller Performance Monitor Controller Index.
This maps the performance monitor information into their respective controllers which support performance data. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.1 |
|
cpqDaCntlrPerfInstance
mandatory
Drive Array Controller Performance Monitor Instance Index.
This maps the performance monitor information for a specific controller and sample interval to controllers which support performance data. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.2 |
|
cpqDaCntlrPerfSampleInterval
mandatory
Array Controller Performance Monitor Sample Interval.
This value indicates the length of the performance interval for this controller and all logical volumes associated with this controller. This value i… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.3 |
|
cpqDaCntlrPerfVersion
mandatory
Array Controller Performance Monitor Version.
This value specifies the version of the performance monitor interface. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.4 |
|
cpqDaCntlrPerfCpuPercentBusy
mandatory
Array Controller Performance Monitor Cpu Percent Busy.
This value specifies the total CPU percent busy as a number from 0 to 100 inclusive. If the value cannot be determined or is not applicable, the val… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.5 |
|
cpqDaCntlrPerfCommandCount
mandatory
Array Controller Performance Monitor Command Count.
This value shows the total number of read and write commands processed in this sample. This value is expressed in read and write commands per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.6 |
|
cpqDaCntlrPerfAvgLatency
mandatory
Array Controller Performance Monitor Average
Command Latency. This value shows the average command latency for this sample in 1/100,000 second units. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.7.1.1.7 |
.1.3.6.1.4.1.232.3.2.8.1
·
1 row entry
·
13 columns
Drive Array Logical Drive Performance Monitor Table.
A table of logical drive entries supporting the performance
monitor information.
Drive Array Logical Drive Performance Monitor Entry.
A performance monitor entry.
A performance monitor entry.
Indexes
cpqDaLogDrvPerfCntlrIndex cpqDaLogDrvPerfIndex cpqDaLogDrvPerfInstance
| Column | Syntax | OID |
|---|---|---|
|
cpqDaLogDrvPerfCntlrIndex
mandatory
Drive Array Logical Drive Performance Monitor Controller Index.
This maps the performance monitor information into their respective controllers which support performance data. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.1 |
|
cpqDaLogDrvPerfIndex
mandatory
Drive Array Logical Drive Performance Monitor Drive Index.
This maps the performance monitor information into their respective logical drives which support performance data. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.8.1.1.2 |
|
cpqDaLogDrvPerfInstance
mandatory
Drive Array Logical Drive Performance Monitor Instance Index.
This maps the performance monitor information for a specific controller, logical drive and sample interval to controllers which support perfor… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.3 |
|
cpqDaLogDrvPerfSampleInterval
mandatory
Array Logical Drive Performance Monitor Sample Interval.
This value indicates the length of the performance interval for this controller and all logical volumes associated with this controller. This valu… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.4 |
|
cpqDaLogDrvPerfAvgQueueDepth
mandatory
Array Logical Drive Performance Monitor Average Queue Depth.
This value indicates the average command queue depth of the logical volume. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.5 |
|
cpqDaLogDrvPerfReads
mandatory
Array Logical Drive Performance Monitor Reads.
This value is the count of read requests for the logical volume expressed in reads per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.6 |
|
cpqDaLogDrvPerfWrites
mandatory
Array Logical Drive Performance Monitor Writes.
This value is the count of write requests for the logical volume expressed in writes per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.7 |
|
cpqDaLogDrvPerfTotalIO
mandatory
Array Logical Drive Performance Monitor Total I/O.
This value shows the total number of read and write requests for the logical volume expressed in reads and writes per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.8 |
|
cpqDaLogDrvPerfCacheHits
mandatory
Array Logical Drive Performance Monitor Cache Hits.
This value shows the total number of read cache hits for the logical volume. This value is expressed in cache hits per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.9 |
|
cpqDaLogDrvPerfCacheMisses
mandatory
Array Logical Drive Performance Monitor Cache Misses.
This value shows the total number of read cache misses for the logical volume. This value is expressed in cache misses per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.10 |
|
cpqDaLogDrvPerfReadAheadSectors
mandatory
Array Logical Drive Performance Monitor Read Ahead Sectors.
This value shows the total number read ahead sectors pre-fetched for the logical volume for this interval. This value is expressed in sectors p… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.11 |
|
cpqDaLogDrvPerfSectorsRead
mandatory
Array Logical Drive Performance Monitor Sectors Read.
This value shows the number of sectors read for the logical volume for this interval. This value is expressed in sectors per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.12 |
|
cpqDaLogDrvPerfSectorsWritten
mandatory
Array Logical Drive Performance Monitor Sectors Written.
This value shows the number of sectors written for the logical volume for this interval. This value is expressed in sectors per second. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.8.1.1.13 |
.1.3.6.1.4.1.232.3.2.9.1
·
1 row entry
·
22 columns
Drive Array Tape Drive Table.
A table of tape drive entries.
Drive Array Tape Drive Entry.
A tape drive entry.
A tape drive entry.
Indexes
cpqDaTapeDrvCntlrIndex cpqDaTapeDrvBusIndex cpqDaTapeDrvScsiIdIndex cpqDaTapeDrvLunIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaTapeDrvCntlrIndex
mandatory
Drive Array Tape Drive Controller Index.
This index maps the tape drive back to the controller to which it is attached. The value of this index is the same as the one used under the controller group. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.9.1.1.1 |
|
cpqDaTapeDrvBusIndex
mandatory
Drive Array Tape Drive SCSI Bus Index.
This is the controller SCSI bus to which the tape drive is attached. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.9.1.1.2 |
|
cpqDaTapeDrvScsiIdIndex
mandatory
Drive Array Tape Drive SCSI Index.
This is the SCSI Target Id of the tape drive. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.9.1.1.3 |
|
cpqDaTapeDrvLunIndex
mandatory
Drive Array Tape Drive Logical Unit Number Index.
This is the logical unit number of the tape drive. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.9.1.1.4 |
|
cpqDaTapeDrvName
mandatory
Drive Array Tape Drive Model Name.
This is the model name of the tape drive. It can be used for identification purposes. |
OctetString Constraints: range: 0-128 |
.1.3.6.1.4.1.232.3.2.9.1.1.5 |
|
cpqDaTapeDrvSerialNumber
mandatory
Drive Array Tape Drive Serial Number.
This is the unit serial number for the tape drive. It can be used for identification purposes. |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.232.3.2.9.1.1.6 |
|
cpqDaTapeDrvFwRev
mandatory
Drive Array Tape Drive Firmware Revision.
This is firmware revision level of the tape drive. It can be used for identification purposes. |
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.232.3.2.9.1.1.7 |
|
cpqDaTapeDrvStatus
mandatory
Drive Array Tape Drive Status.
The tape drive can be in one of the following states: other(1) The tape drive is in a state other than one of those listed below. ok(2) I… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.8 |
|
cpqDaTapeDrvCondition
mandatory
Drive Array Tape Drive Condition.
This value represents the overall condition of the tape drive. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.9.1.1.9 |
|
cpqDaTapeDrvFwSubtype
mandatory
Drive Array Tape Drive Firmware Subtype.
This is used to differentiate the firmware versions which have the same tape drive type (as specified by cpqDaTapeDrvType). Tape drives will contain a value of 1 … |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.9.1.1.10 |
|
cpqDaTapeDrvType
mandatory
Drive Array Tape Drive Type.
This is the drives model, and can be used for identification purposes. The following values are defined: other(1) The management agent does not recognize th… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.11 |
|
cpqDaTapeDrvCleanReq
mandatory
Drive Array Tape Drive Cleaning Required.
This is an indication of whether the tape drive heads require a cleaning session to occur. If this variable indicates a need to clean the tape heads, then a clea… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.12 |
|
cpqDaTapeDrvCleanTapeRepl
mandatory
Drive Array Tape Drive Cleaning Tape Replacement.
This variable is only applicable to autoloader tape drives. This variable indicates whether the cleaning tape which is inserted in an autoloader needs to … |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.13 |
|
cpqDaTapeDrvCleanTapeCount
mandatory
Drive Array Tape Drive Cleaning Tape Count.
This variable is a count from a tape drive of the number of cleanings done by the tape cleaner last in the drive. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.9.1.1.14 |
|
cpqDaTapeDrvLibraryDrive
mandatory
Drive Array Tape Drive Library Drive.
This variable indicates whether or not the tape drive is part of a tape library. It can be in one of the following states: other(1) Indicates that th… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.15 |
|
cpqDaTapeDrvMagSize
mandatory
Tape Physical Drive Magazine Size.
This variable indicates the number of tape slots available in the tape autoloader magazine cartridge that is currently loaded into the tape drive. For non… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.9.1.1.16 |
|
cpqDaTapeDrvHotPlug
mandatory
Drive Array Tape Drive Hot Plug Support Status.
The following values are defined: other(1) The agent is unable to determine if this drive supports hot plug replacement. h… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.17 |
|
cpqDaTapeDrvPlacement
mandatory
Drive Array Tape Drive Placement.
The following values are defined: other(1) The agent is unable to determine if the tape drive is internal or external to the system chassis. … |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.18 |
|
cpqDaTapeDrvCurrentWidth
mandatory
Drive Array Tape Drive Current Width.
The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width for this drive. … |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.19 |
|
cpqDaTapeDrvCurrentSpeed
mandatory
Drive Array Tape Drive Current Data Transfer Speed.
The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer speed for this drive… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.20 |
|
cpqDaTapeDrvProtocol
mandatory
Drive Array Tape Drive Protocol.
The following values are defined: other(1) The agent is unable to determine the protocol for this drive. parallelScsi(2) The drive protoc… |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.21 |
|
cpqDaTapeDrvNegotiatedLinkRate
mandatory
Drive Array Tape Drive Negotiated Link Rate.
The following values are defined: other(1) The agent is unable to determine the negotiated link rate this drive. rate-1-5(2) … |
Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.22 |
.1.3.6.1.4.1.232.3.2.10.1
·
1 row entry
·
9 columns
Drive Array Tape Counters Table.
Drive Array Tape Counters Entry.
Indexes
cpqDaTapeCountersCntlrIndex cpqDaTapeCountersBusIndex cpqDaTapeCountersScsiIdIndex cpqDaTapeCountersLunIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaTapeCountersCntlrIndex
mandatory
Drive Array Tape Counters Controller Index.
This index maps the tape drive back to the controller to which it is attached. The value of this index is the same as the one used under the controller group. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.10.1.1.1 |
|
cpqDaTapeCountersBusIndex
mandatory
Drive Array Tape Counters Scsi Bus Index.
This is the controller SCSI bus to which the tape drive is attached. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.10.1.1.2 |
|
cpqDaTapeCountersScsiIdIndex
mandatory
Drive Array Tape Counters SCSI Index.
This is the SCSI Target Id of the tape drive. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.10.1.1.3 |
|
cpqDaTapeCountersLunIndex
mandatory
Drive Array Tape Counters Logical Unit Number Index.
This is the logical unit number of the tape drive. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.10.1.1.4 |
|
cpqDaTapeCountersReWrites
mandatory
Tape Device Re-write count.
This is the number of times blocks had to be re-written to the device. This value is maintained since the Tape Hardware Interface driver was loaded. Re-write er… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.10.1.1.5 |
|
cpqDaTapeCountersReReads
mandatory
Tape Device Re-read count.
This is the number of times blocks had to be re-read from the device. This value is maintained since the Tape Hardware Interface driver was loaded. Re-read error… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.10.1.1.6 |
|
cpqDaTapeCountersTotalErrors
mandatory
Tape Device Total Errors.
This is the total number of read/write errors encountered. This value is maintained since the Tape Hardware Interface driver was loaded. Errors may occasionally oc… |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.10.1.1.7 |
|
cpqDaTapeCountersTotalUncorrectable
mandatory
Tape Device Total Uncorrectable Errors.
This is the total number of read and write errors which could not be corrected. This value is maintained since the Tape Hardware Interface driver was loaded. … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.10.1.1.8 |
|
cpqDaTapeCountersTotalBytes
mandatory
Tape Device Total Bytes.
This is the number total number of bytes read/written to the tape currently installed in the device. This value is reset whenever a new tape is inserted into the device. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.10.1.1.9 |
.1.3.6.1.4.1.232.3.2.11.1
·
1 row entry
·
20 columns
Drive Array Tape Library Table.
Drive Array Tape Library Entry.
Indexes
cpqDaTapeLibraryCntlrIndex cpqDaTapeLibraryScsiBus cpqDaTapeLibraryScsiTarget cpqDaTapeLibraryScsiLun
| Column | Syntax | OID |
|---|---|---|
|
cpqDaTapeLibraryCntlrIndex
mandatory
Drive Array Tape Library Controller Index.
This index maps the tape library back to the controller to which it is attached. The value of this index is the same as the one used under the controller group. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.11.1.1.1 |
|
cpqDaTapeLibraryScsiBus
mandatory
Drive Array Tape Library Scsi Bus.
The bus index indicates to which SCSI bus instance on a controller this table entry belongs. The instances start at one and increment for each SCSI bus on a controller. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.11.1.1.2 |
|
cpqDaTapeLibraryScsiTarget
mandatory
Drive Array Tape Library Scsi Target.
The target index indicates to which SCSI ID on a controller SCSI bus this table entry belongs. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.11.1.1.3 |
|
cpqDaTapeLibraryScsiLun
mandatory
Drive Array Tape Library Scsi Lun.
The Lun index indicates to which logical unit on a SCSI ID on a controller SCSI bus this table entry belongs. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.11.1.1.4 |
|
cpqDaTapeLibrarySerialNumber
mandatory
Drive Array Tape Library Serial Number.
This is the unit serial number for the tape library. It can be used for identification purposes. |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.232.3.2.11.1.1.5 |
|
cpqDaTapeLibraryModel
mandatory
Drive Array Tape Library Model.
This is the model name of the tape library. It can be used for identification purposes. |
OctetString Constraints: range: 0-128 |
.1.3.6.1.4.1.232.3.2.11.1.1.6 |
|
cpqDaTapeLibraryFWRev
mandatory
Drive Array Tape Library Serial Number.
This is firmware revision level of the tape library. It can be used for identification purposes. |
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.232.3.2.11.1.1.7 |
|
cpqDaTapeLibraryStatus
mandatory
Drive Array Tape Library Status.
The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok(2) Indic… |
Enumeration | .1.3.6.1.4.1.232.3.2.11.1.1.8 |
|
cpqDaTapeLibraryDoorStatus
mandatory
Drive Array Tape Library Door Status.
The door can be in one of the following states: other(1) The door is in a state other than one of those listed below. notSupported(2… |
Enumeration | .1.3.6.1.4.1.232.3.2.11.1.1.9 |
|
cpqDaTapeLibraryCondition
mandatory
Drive Array Tape Library Condition.
This value represents the overall condition of the tape library. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.11.1.1.10 |
|
cpqDaTapeLibraryOverallCondition
mandatory
Drive Array Tape Library Overall Condition.
This value represents the overall condition of the tape library and any associated tape drives. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.232.3.2.11.1.1.11 |
|
cpqDaTapeLibraryLastError
obsolete
Drive Array Tape Library Last Error.
This is the last error returned by the tape library. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.232.3.2.11.1.1.12 |
|
cpqDaTapeLibraryStatHours
mandatory
Drive Array Tape Library Stat Hours.
This is the number of hours of operation for the library. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.11.1.1.13 |
|
cpqDaTapeLibraryStatMoves
mandatory
Drive Array Tape Library Stat Moves.
This is the number of tape moves for the library loader arm. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.232.3.2.11.1.1.14 |
|
cpqDaTapeLibraryDriveList
obsolete
Drive Array Tape Library Tape Drive List.
This is a data structure containing the list of tape drive ids that are present in this library. The format is: field octets contents ===== … |
OctetString Constraints: range: 0-60 |
.1.3.6.1.4.1.232.3.2.11.1.1.15 |
|
cpqDaTapeLibraryCurrentWidth
mandatory
Drive Array Tape Library Current Width.
The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width for this library. … |
Enumeration | .1.3.6.1.4.1.232.3.2.11.1.1.16 |
|
cpqDaTapeLibraryCurrentSpeed
mandatory
Drive Array Tape Library Current Data Transfer Speed.
The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer speed for this lib… |
Enumeration | .1.3.6.1.4.1.232.3.2.11.1.1.17 |
|
cpqDaTapeLibraryDriveList2
mandatory
Drive Array Tape Library Tape Drive List 2.
This is a data structure containing the list of tape drive ids that are present in this library. The format is: field octets contents ====… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.232.3.2.11.1.1.18 |
|
cpqDaTapeLibraryProtocol
mandatory
Drive Array Tape Library Protocol.
The following values are defined: other(1) The agent is unable to determine the protocol for this library. parallelScsi(2) The library … |
Enumeration | .1.3.6.1.4.1.232.3.2.11.1.1.19 |
|
cpqDaTapeLibraryNegotiatedLinkRate
mandatory
Drive Array Tape Library Negotiated Link Rate.
The following values are defined: other(1) The agent is unable to determine the negotiated link rate for this library. rate… |
Enumeration | .1.3.6.1.4.1.232.3.2.11.1.1.20 |
.1.3.6.1.4.1.232.3.3.3
·
1 row entry
·
3 columns
An ordered list of trap log entries (conceptually a queue).
The trap log entries will be kept in the order in which they
were generated with the most recent trap at index 1 and the
oldest trap entry at index trapLogMaxSize. If the maximum
number size has been reached and a new trap occurs the oldest
trap will be removed when the new trap is added so the
trapMaxLogSize is not exceeded.
A description of a trap event.
Indexes
cpqDaTrapLogIndex
| Column | Syntax | OID |
|---|---|---|
|
cpqDaTrapLogIndex
obsolete
This value uniquely identifies this trapLogEntry at this time.
The most recent trap will have an index of 1 and the oldest trap will have an index of trapLogMaxSize. Because of the queue-like nature of t… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.232.3.3.3.1.1 |
|
cpqDaTrapType
obsolete
The type of the trap event that this entry describes.
This number refers to an entry in a list of traps enumerating the possible traps the Drive Array agent may issue. |
Enumeration | .1.3.6.1.4.1.232.3.3.3.1.2 |
|
cpqDaTrapTime
obsolete
The time of the trap event that this entry describes.
The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Each octet gives the value in BCD. |
OctetString Constraints: range: 6-6 |
.1.3.6.1.4.1.232.3.3.3.1.3 |