cpqDaTapeDrvCleanReq
CPQIDA-MIB ·
.1.3.6.1.4.1.232.3.2.9.1.1.12
Object
column
mandatory
Enumeration
Drive Array Tape Drive Cleaning Required.
This is an indication of whether the tape drive heads
require a cleaning session to occur. If this variable
indicates a need to clean the tape heads, then a cleaning
tape will need to be inserted and run through a cleaning
cycle.
This variable can be in one of the following states:
other(1)
The tape drive does not support monitoring of the cleaning
required status.
true(2)
The tape drive requires a cleaning tape session in order
to clean the heads.
false(3)
The tape drive does not require any cleaning tape session.
Context
- MIB
- CPQIDA-MIB
- OID
.1.3.6.1.4.1.232.3.2.9.1.1.12- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqDaTapeDrvEntry
- Table
- cpqDaTapeDrvTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqDaTapeDrvCntlrIndex mandatory Drive Array Tape Drive Controller Index.
This index maps the tape drive back to the controller to which
it is attached. The value of this index is the same as the o… | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.1 |
| cpqDaTapeDrvFwSubtype mandatory Drive Array Tape Drive Firmware Subtype.
This is used to differentiate the firmware versions
which have the same tape drive type (as specified by
cpqDaTapeDrvType).… | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.10 |
| cpqDaTapeDrvType mandatory Drive Array Tape Drive Type.
This is the drives model, and can be used for identification
purposes. The following values are defined:
other(1)
Th… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.11 |
| cpqDaTapeDrvCleanTapeRepl mandatory Drive Array Tape Drive Cleaning Tape Replacement.
This variable is only applicable to autoloader tape drives.
This variable indicates whether the cleaning tape whic… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.13 |
| cpqDaTapeDrvCleanTapeCount mandatory Drive Array Tape Drive Cleaning Tape Count.
This variable is a count from a tape drive of the number of
cleanings done by the tape cleaner last in the drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.14 |
| cpqDaTapeDrvLibraryDrive mandatory Drive Array Tape Drive Library Drive.
This variable indicates whether or not the tape drive is part
of a tape library. It can be in one of the following states:
… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.15 |
| cpqDaTapeDrvMagSize mandatory Tape Physical Drive Magazine Size.
This variable indicates the number of tape slots available in
the tape autoloader magazine cartridge that is currently loaded
int… | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.16 |
| cpqDaTapeDrvHotPlug mandatory Drive Array Tape Drive Hot Plug Support Status.
The following values are defined:
other(1)
The agent is unable to determine if this drive
support… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.17 |
| cpqDaTapeDrvPlacement mandatory Drive Array Tape Drive Placement.
The following values are defined:
other(1)
The agent is unable to determine if the tape drive is
internal or ex… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.18 |
| cpqDaTapeDrvCurrentWidth mandatory Drive Array Tape Drive Current Width.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
tra… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.19 |
| cpqDaTapeDrvBusIndex mandatory Drive Array Tape Drive SCSI Bus Index.
This is the controller SCSI bus to which the tape drive is
attached. | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.2 |
| cpqDaTapeDrvCurrentSpeed mandatory Drive Array Tape Drive Current Data Transfer Speed.
The following values are defined:
other(1)
The agent is unable to determine the current negotia… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.20 |
| cpqDaTapeDrvProtocol mandatory Drive Array Tape Drive Protocol.
The following values are defined:
other(1)
The agent is unable to determine the protocol for this drive.
… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.21 |
| cpqDaTapeDrvNegotiatedLinkRate mandatory Drive Array Tape Drive Negotiated Link Rate.
The following values are defined:
other(1)
The agent is unable to determine the negotiated link rate
… | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.22 |
| cpqDaTapeDrvScsiIdIndex mandatory Drive Array Tape Drive SCSI Index.
This is the SCSI Target Id of the tape drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.3 |
| cpqDaTapeDrvLunIndex mandatory Drive Array Tape Drive Logical Unit Number Index.
This is the logical unit number of the tape drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.4 |
| cpqDaTapeDrvName mandatory Drive Array Tape Drive Model Name.
This is the model name of the tape drive. It can be used for
identification purposes. | column | OctetString | .1.3.6.1.4.1.232.3.2.9.1.1.5 |
| cpqDaTapeDrvSerialNumber mandatory Drive Array Tape Drive Serial Number.
This is the unit serial number for the tape drive. It can be
used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.3.2.9.1.1.6 |
| cpqDaTapeDrvFwRev mandatory Drive Array Tape Drive Firmware Revision.
This is firmware revision level of the tape drive. It can be
used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.3.2.9.1.1.7 |
| cpqDaTapeDrvStatus mandatory Drive Array Tape Drive Status.
The tape drive can be in one of the following states:
other(1)
The tape drive is in a state other than one of those … | column | Enumeration | .1.3.6.1.4.1.232.3.2.9.1.1.8 |
| cpqDaTapeDrvCondition mandatory Drive Array Tape Drive Condition.
This value represents the overall condition of the tape drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.9.1.1.9 |