cpqDaLogDrvStatus

CPQIDA-MIB · .1.3.6.1.4.1.232.3.2.3.1.1.4

Object

column mandatory Enumeration

Logical Drive Status.
              
The logical drive can be in one of the following states:
              
Ok (2)
  Indicates that the logical drive is in normal operation mode.
              
Failed (3)
  Indicates that more physical drives have failed than the
  fault tolerance mode of the logical drive can handle without
  data loss.
              
Unconfigured (4)
  Indicates that the logical drive is not configured.
              
Recovering (5)
  Indicates that the logical drive is using Interim Recovery Mode.
  In Interim Recovery Mode, at least one physical drive has
  failed, but the logical drive`s fault tolerance mode lets the
  drive continue to operate with no data loss.
              
Ready Rebuild (6)
  Indicates that the logical drive is ready for Automatic Data
  Recovery.  The physical drive that failed has been replaced,
  but the logical drive is still operating in Interim Recovery
  Mode.
              
Rebuilding (7)
  Indicates that the logical drive is currently doing Automatic
  Data Recovery.  During Automatic Data Recovery, fault tolerance
  algorithms restore data to the replacement drive.
              
Wrong Drive (8)
  Indicates that the wrong physical drive was replaced after a
  physical drive failure.
              
Bad Connect (9)
  Indicates that a physical drive is not responding.
              
Overheating (10)
  Indicates that the drive array enclosure that contains the
  logical drive is overheating.  The drive array is still
  functioning, but should be shutdown.
              
Shutdown (11)
  Indicates that the drive array enclosure that contains the
  logical drive has overheated.  The logical drive is no longer
  functioning.
              
Expanding (12)
  Indicates that the logical drive is currently undergoing a
  transformation (expansion, shrinkage or movement). During 
  transformation, fault tolerance algorithms redistribute logical
  drive data according to the transformation operation selected.
              
Not Available (13)
  Indicates that the logical drive is currently unavailable.
  If a logical drive is expanding and the new configuration
  frees additional disk space, this free space can be
  configured into another logical volume.  If this is done,
  the new volume will be set to not available.
              
Queued For Expansion (14)
  Indicates that the logical drive is ready for transformation 
  (expansion, shrinkage or movement). The logical drive is in the
  queue for transformation.
              
Multi-path Access Degraded (15)
  Indicates that previously all disk drives of this logical
  drive had more than one I/O path to the controller, but now
  one or few of them have only one I/O path.
              
Erasing (16)
  Indicates that the logical drive is currently being erased.
                
Predictive Spare Rebuild Ready (17)
  Indicates that the logical drive is ready to perform a predictive 
  spare rebuild. The logical drive is in the queue for rebuild. 
                
Rapid Parity Initialization In Progress (18)
  Indicates that the logical drive is currently undergoing rapid
  parity initialization (RPI). The logical drive is unavailable to the
  operating system during RPI and will be made available once RPI
  has completed. 
                
Rapid Parity Initialization Pending (19)
  Indicates that the logical drive is currently pending rapid
  parity initialization and will be unavailable.
                
No Access - Encrypted - Missing Key (20)
  Indicates that the logical drive is currently encrypted and cannot
  be accessed because the array controller has not yet received the 
  encryption key from iLO nor was it found in the controller`s CSP 
  NVRAM.              
               
Unencrypted to Encrypted Transformation in Progress (21)
  Indicates that the logical drive is currently being transformed from
  unencrypted to encrypted and the volume is online. Data will be
  written unencrypted if the write is directed to an LBA range on the
  logical drive that has not yet been migrated.
                
New Logical Drive Key Rekey in Progress (22)
  Indicates that the logical drive is currently encrypted and all data
  is currently being rekeyed with a new logical drive key using the
  background capacity expansion transformation task. The logical drive
  is online.
                
No Access - Encrypted with Controller Encryption Not Enabled (23)
  Indicates that the logical drive is currently encrypted and cannot
  be accessed because the array controller does not have encryption
  enabled.
                
Unencrypted To Encrypted Transformation Not Started (24)
  Indicates that the logical drive has received a request to transform
  from unencrypted to encrypted but this process has not yet started. 
  The unencrypted logical drive is currently online.
                
New Logical Drive Key Rekey Request Received (25)
  Indicates that the logical drive is encrypted and has received 
  a request to rekey all data with a new logical drive encryption key.
  The logical drive is online.

Context

MIB: CPQIDA-MIB
OID: .1.3.6.1.4.1.232.3.2.3.1.1.4
Type: column
Access: readonly
Status: mandatory
Parent: cpqDaLogDrvEntry
Table: cpqDaLogDrvTable
Siblings: 24

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cpqDaLogDrvCntlrIndex mandatory Drive Array Logical Drive Controller Index. This maps the logical drives into their respective controllers. Controller index `i` under the controller group owns the…	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.1`
cpqDaLogDrvPhyDrvIDs obsolete Drive Array Logical Drive Physical Drive IDs. This lists the physical drive IDs which are associated with this logical drive. These are the same IDs which can be us…	column	OctetString	`.1.3.6.1.4.1.232.3.2.3.1.1.10`
cpqDaLogDrvCondition mandatory The Logical Drive condition. This value represents the overall condition of this logical drive and any associated physical drives.	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.11`
cpqDaLogDrvPercentRebuild mandatory Logical Drive Percent Rebuild. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value is the percent complete o…	column	RFC1155-SMIGauge	`.1.3.6.1.4.1.232.3.2.3.1.1.12`
cpqDaLogDrvStripeSize mandatory Logical Drive Stripe Size. This is the size of a logical drive stripe in kilobytes.	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.13`
cpqDaLogDrvOsName mandatory Logical Drive OS Name. The OS name for this array logical drive. This field will be a null (size 0) string if the agent does not support OS name.	column	OctetString	`.1.3.6.1.4.1.232.3.2.3.1.1.14`
cpqDaLogDrvBlinkTime mandatory Logical Drive Physical Drive Blink Time Count. The logical drive blink time variable allows the drive tray LEDs of all physical drives in a logical drive to blink. …	column	RFC1155-SMICounter	`.1.3.6.1.4.1.232.3.2.3.1.1.15`
cpqDaLogDrvSpareReplaceMap obsolete Logical Drive Spare To Replacement Drive Map. This data structure contains the spare to physical drive replacement map. The format is: octet cont…	column	OctetString	`.1.3.6.1.4.1.232.3.2.3.1.1.16`
cpqDaLogDrvRebuildingPhyDrv mandatory Logical Drive Physical Drive Rebuilding Index. This is the physical drive index of the physical drive that is currently rebuilding. If the value cannot be determin…	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.17`
cpqDaLogDrvMultipathAccess mandatory Logical Drive Multi-path Access. This indicates whether all the physical disks including spares of this logical drive have been configured to have and currently sti…	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.18`
cpqDaLogDrvNmbrOfParityGroups mandatory Logical Drive Number Of Parity Groups. Indicates the number of parity groups (i.e. RAID 4/5/6 subvolumes), that are being striped across.	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.19`
cpqDaLogDrvIndex mandatory Drive Array Logical Drive Index. This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controlle…	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.2`
cpqDaLogDrvSplitMirrorBackupLogDrv mandatory Logical Drive Split Mirror Backup Logical Drive. Indicates if this logical drive is a backup logical drive belonging to a split mirror. The following…	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.20`
cpqDaLogDrvCacheVolAccelAssocType mandatory Logical Drive Cache Volume Accelerator Association Type. Indicates the way in which this logical drive is associated with a cache volume accelerator group. …	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.21`
cpqDaLogDrvCacheVolIndex mandatory Logical Drive Cache Volume Index. The logical drive index of the cache volume used by this logical drive. The value of this index is the same as the logical drive …	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.22`
cpqDaLogDrvRPIPercentComplete mandatory Logical Drive Rapid Parity Initialization Percent Complete. When a fault tolerant logical volume is created, parity data for the volume must be initialized. This va…	column	RFC1155-SMIGauge	`.1.3.6.1.4.1.232.3.2.3.1.1.23`
cpqDaLogDrvSSDSmartPathStatus mandatory Logical Drive SSD Smart Path Status. Indicates the logical drive SSD Smart Path status. An SSD Smart Path for a logical drive can be utilized only when both the Sma…	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.24`
cpqDaLogDrvEncryptionStatus mandatory Logical Drive Encryption Status. Indicates the logical drive encryption status. The following values are defined: Other (1) Indi…	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.25`
cpqDaLogDrvFaultTol mandatory Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. The following values are valid for the Logical Drive Fault Tolerance: …	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.3`
cpqDaLogDrvAutoRel mandatory Array Controller Logical Drive Auto-Reliability Delay. This value indicates how many seconds the logical drive will wait with no requests before beginning Auto-Reli…	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.5`
cpqDaLogDrvRebuildBlks obsolete Logical Drive Rebuild Blocks Remaining. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value shows how many b…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.232.3.2.3.1.1.6`
cpqDaLogDrvHasAccel mandatory Logical Drive Has Cache Module Board. This indicates whether the logical drive has a Cache Module board configured and enabled. The following values are valid: …	column	Enumeration	`.1.3.6.1.4.1.232.3.2.3.1.1.7`
cpqDaLogDrvAvailSpares obsolete Drive Array Logical Drive Available Spares. This indicates if this logical drive has one or more spares designated for it that are not currently in use by another d…	column	OctetString	`.1.3.6.1.4.1.232.3.2.3.1.1.8`
cpqDaLogDrvSize mandatory Logical Drive Size. This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturer…	column	Integer32	`.1.3.6.1.4.1.232.3.2.3.1.1.9`