cpqDaSpareStatus
CPQIDA-MIB ·
.1.3.6.1.4.1.232.3.2.4.1.1.3
Object
column
mandatory
Enumeration
Spare Status.
This shows the status of the on-line spare drive.
The following values are valid for the spare status:
Failed (3)
The on-line spare has failed and is no longer available for use.
Inactive (4)
The monitored system has an on-line spare configured, but is
not currently in use.
Building (5)
A physical drive has failed. Automatic Data Recovery
is in progress to recover data to the on-line spare.
Active (6)
A physical drive has failed. Automatic Data Recovery is
complete. The system is using the on-line spare as a
replacement for the failed drive.
Context
- MIB
- CPQIDA-MIB
- OID
.1.3.6.1.4.1.232.3.2.4.1.1.3- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqDaSpareEntry
- Table
- cpqDaSpareTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqDaSpareCntlrIndex mandatory Drive Array Spare Controller Index.
This index maps the spare drive back to the controller to which
it is attached. The value of this index is the same as the one
… | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.1 |
| cpqDaSpareReplacedDrvBay mandatory Spare Replaced Drive Bay.
If the spare status is active(6) or building(5), then this
has the physical drive bay number of the replaced drive.
If the value cannot be… | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.10 |
| cpqDaSparePercentRebuild mandatory Drive Array Spare Percent Rebuild.
If the spare status is building(5), then this is percent
complete of of the rebuild.
The data contained on the fai… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.3.2.4.1.1.11 |
| cpqDaSpareLocationString mandatory Spare Drive Location String.
This string describes the location of the drive in relation to
the controller. If the location string cannot be determined,
the agent … | column | OctetString | .1.3.6.1.4.1.232.3.2.4.1.1.12 |
| cpqDaSparePhyDrvIndex mandatory Drive Array Spare Physical Drive Index.
This index maps the spare to the physical drive it represents.
The value of this index is the same as the one used with the
… | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.2 |
| cpqDaSpareReplacedDrv mandatory Spare Replaced Drive.
If the spare status is active(6) or building(5), then this
has the physical drive number of the replaced drive. Otherwise
a value of -1 will … | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.4 |
| cpqDaSpareRebuildBlks obsolete Drive Array Spare Number Of Rebuild Blocks Left.
If the spare status is building(5), then this is the number of
blocks left to rebuild before completion.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.4.1.1.5 |
| cpqDaSpareCondition mandatory The Spare Drive condition.
This value represents the overall condition of this spare drive
and any associated physical drives. | column | Enumeration | .1.3.6.1.4.1.232.3.2.4.1.1.6 |
| cpqDaSpareBusNumber mandatory Spare Drive SCSI Bus Number.
The bus number indicates to which SCSI bus this spare drive
is attached. The first instance is one and increments for
each SCSI bus on… | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.7 |
| cpqDaSpareBay mandatory Spare Drive Bay Location.
This value matches the bay location where the physical drive has
been installed. For a SCSI drive, this is the SCSI ID of the
drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.8 |
| cpqDaSpareReplacedDrvBusNumber mandatory Spare Replaced Drive Bus Number.
If the spare status is active(6) or building(5), then this
has the physical drive bus number of the replaced drive.
If the value ca… | column | Integer32 | .1.3.6.1.4.1.232.3.2.4.1.1.9 |