cpqDaTapeCountersReWrites
CPQIDA-MIB ·
.1.3.6.1.4.1.232.3.2.10.1.1.5
Object
Tape Device Re-write count.
This is the number of times blocks had to be re-written to the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.
Re-write errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have re-writes, you may have a problem. Some common causes
include radio frequency interference (RFI) on the bus cables,
bad or missing terminating resisters on the drives or having more
than one device with the same SCSI ID. Insure the bus cable is
free of obstructions and that the devices on the bus are properly
configured.
Context
- MIB
- CPQIDA-MIB
- OID
.1.3.6.1.4.1.232.3.2.10.1.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqDaTapeCountersEntry
- Table
- cpqDaTapeCountersTable
- Siblings
- 8
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqDaTapeCountersCntlrIndex mandatory Drive Array Tape Counters Controller Index.
This index maps the tape drive back to the controller to which
it is attached. The value of this index is the same as th… | column | Integer32 | .1.3.6.1.4.1.232.3.2.10.1.1.1 |
| cpqDaTapeCountersBusIndex mandatory Drive Array Tape Counters Scsi Bus Index.
This is the controller SCSI bus to which the tape drive is
attached. | column | Integer32 | .1.3.6.1.4.1.232.3.2.10.1.1.2 |
| cpqDaTapeCountersScsiIdIndex mandatory Drive Array Tape Counters SCSI Index.
This is the SCSI Target Id of the tape drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.10.1.1.3 |
| cpqDaTapeCountersLunIndex mandatory Drive Array Tape Counters Logical Unit Number Index.
This is the logical unit number of the tape drive. | column | Integer32 | .1.3.6.1.4.1.232.3.2.10.1.1.4 |
| cpqDaTapeCountersReReads mandatory Tape Device Re-read count.
This is the number of times blocks had to be re-read from the
device. This value is maintained since the Tape Hardware Interface
driver … | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.10.1.1.6 |
| cpqDaTapeCountersTotalErrors mandatory Tape Device Total Errors.
This is the total number of read/write errors encountered.
This value is maintained since the Tape Hardware Interface
driver was loaded.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.10.1.1.7 |
| cpqDaTapeCountersTotalUncorrectable mandatory Tape Device Total Uncorrectable Errors.
This is the total number of read and write errors which could not
be corrected. This value is maintained since the Tape Har… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.10.1.1.8 |
| cpqDaTapeCountersTotalBytes mandatory Tape Device Total Bytes.
This is the number total number of bytes read/written to the tape
currently installed in the device. This value is reset whenever
a new ta… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.10.1.1.9 |