cpqDaAccelBattery
CPQIDA-MIB ·
.1.3.6.1.4.1.232.3.2.2.2.1.6
Object
column
mandatory
Enumeration
Cache Module Board Backup Power Status.
This monitors the status of each backup power source on the board.
The backup power source can only recharge when the system has
power applied. The type of backup power source used is indicated
by cpqDaAccelBackupPowerSource.
The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize
backup power status. You may need to update your software.
Ok (2)
The backup power source is fully charged.
Recharging (3)
The array controller has one or more cache module backup power
sources that are recharging. Cache module operations such as
Battery/Flash Backed Write Cache, Expansion, Extension and Migration
are temporarily suspended until the backup power source is fully
charged. Cache module operations will automatically resume
when charging is complete.
Failed (4)
The battery pack is below the sufficient voltage level and
has not recharged in 36 hours. Your Cache Module board
needs to be serviced.
Degraded (5)
The battery is still operating, however, one of the batteries
in the pack has failed to recharge properly. Your Cache
Module board should be serviced as soon as possible.
NotPresent (6)
A backup power source is not present on the cache module board.
Some controllers do not have backup power sources.
Capacitor Failed (7)
The flash backed cache module capacitor is below the sufficient
voltage level and has not recharged in 10 minutes. Your Cache
Module board needs to be serviced.
Context
- MIB
- CPQIDA-MIB
- OID
.1.3.6.1.4.1.232.3.2.2.2.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqDaAccelEntry
- Table
- cpqDaAccelTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqDaAccelCntlrIndex mandatory Cache Module Board Controller Index.
This value is a logical number whose meaning is OS dependent.
The value has a direct mapping to the controller table index
such… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.1 |
| cpqDaAccelReadMemory mandatory Read Cache Memory.
This shows the amount of memory allocated for the read cache in
kilobytes. Because data is kept in duplicate (mirrored), the
actual amount of us… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.10 |
| cpqDaAccelSerialNumber mandatory Cache Module Serial Number.
The serial number of the Cache Module. This field will
be a null (size 0) string if the cache module does not support
serial number. | column | OctetString | .1.3.6.1.4.1.232.3.2.2.2.1.11 |
| cpqDaAccelTotalMemory mandatory Total Cache Memory.
This value is the total amount of cache module memory in
kilobytes, including both battery-backed and non-battery-backed
memory. | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.12 |
| cpqDaAccelReadCachePercent mandatory Read Cache Percent.
This shows the percent of cache memory allocated for read ahead
caching. If the data cannot be determined or is not applicable,
the value is se… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.3.2.2.2.1.13 |
| cpqDaAccelWriteCachePercent mandatory Write Cache Percent.
This shows the percent of cache memory allocated for posted
write caching. If the data cannot be determined or is not
applicable, the value is… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.3.2.2.2.1.14 |
| cpqDaAccelFailedBatteries mandatory Cache Module Failed Batteries.
This lists the location of cache module failed batteries.
Each octet present contains the position number of a failed
battery. An oc… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.2.1.15 |
| cpqDaAccelBackupPowerSource mandatory Cache Module Board Backup Power Source.
This describes the backup power source being used by the Cache
Module board.
The status can be:
… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.16 |
| cpqDaAccelBoardCurrentTemp mandatory Cache Module Board Current Temperature.
This is the temperature of the cache module board in degrees
Celsius. The field will contain -1 if the cache module
board t… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.17 |
| cpqDaAccelCapacitorCurrentTemp mandatory Cache Module Capacitor Current Temperature.
This is the temperature of the Super-Cap in degrees Celsius.
The field will contain -1 if the Super-Cap temperature
cann… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.18 |
| cpqDaAccelMemoryDataWidth mandatory Cache Memory Data Width.
This is the memory data width (in bits), for the attached cache
module. The field will contain -1 if the memory data width cannot
be calcu… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.19 |
| cpqDaAccelStatus mandatory Cache Module/Operations Status.
This describes the status of the cache module and/or cache operations.
Note that for some controller models, a cache … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.2 |
| cpqDaAccelMemoryTransferRate mandatory Cache Memory Transfer Rate.
This is the memory transfer rate in megatransfers per second (MT/s),
for the attached cache module . The field will contain -1 if the
… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.20 |
| cpqDaAccelMemory mandatory Write Cache Memory.
This shows the amount of memory allocated for the write cache in
kilobytes. Because data is kept in duplicate (mirrored), the
actual amount of … | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.2.1.3 |
| cpqDaAccelBadData mandatory Cache Module Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly char… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.4 |
| cpqDaAccelErrCode mandatory Cache Module Board Error Code.
Use this to determine the status of the write cache operations.
The status can be:
Other (1)
Indicate… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.5 |
| cpqDaAccelReadErrs mandatory Cache Module Board Read Errors.
This shows the total number of read memory parity errors that
were detected while reading from the Cache Module board.
The mirrored … | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.2.2.1.7 |
| cpqDaAccelWriteErrs mandatory Cache Module Board Write Errors.
This shows the total number of write memory parity errors that
were detected while writing to the Cache Module board.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.2.2.1.8 |
| cpqDaAccelCondition mandatory The condition of the device. This value represents the overall
condition of this cache module. | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.2.1.9 |