cpqDaCntlrStndIntr
CPQIDA-MIB ·
.1.3.6.1.4.1.232.3.2.2.1.1.4
Object
column
mandatory
Enumeration
The status of the Standard Interface.
The Standard Interface is how DOS communicates with a drive.
The following values are valid for Standard Interface:
Other (1)
The device driver may not be loaded for this controller.
The instrument agent could not read the information from the
device. Please load the device driver.
Primary (2)
The Standard Interface is using the primary address for
communication. DOS can access this drive and use this drive
as the primary boot device if it has been configured for this
purpose.
Secondary (3)
The Standard Interface is using the secondary address for
communication. DOS can access these drives, but cannot boot
from them.
Disabled (4)
The Standard Interface is not enabled for communication.
DOS will not be able to access these drives.
Unavailable (5)
This controller does not support a Standard Interface.
DOS cannot access these drives.
Context
- MIB
- CPQIDA-MIB
- OID
.1.3.6.1.4.1.232.3.2.2.1.1.4- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqDaCntlrEntry
- Table
- cpqDaCntlrTable
- Siblings
- 42
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqDaCntlrIndex mandatory Array Controller Index.
This value is a logical number whose meaning is OS dependent.
Each physical controller has one unique controller number
associated with it. | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.1 |
| cpqDaCntlrBoardStatus mandatory Array Controller Board Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
status of the… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.10 |
| cpqDaCntlrPartnerBoardStatus mandatory Array Controller Partner Board Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
statu… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.11 |
| cpqDaCntlrBoardCondition mandatory The condition of the device. This value represents the
condition of the controller and any associated cache
modules. | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.12 |
| cpqDaCntlrPartnerBoardCondition mandatory The condition of the device. This value represents the
condition of the controller and any associated cache
modules. | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.13 |
| cpqDaCntlrDriveOwnership mandatory Array Controller Drive Ownership.
For duplexed controllers, indicates to which controller slot
the shared devices are associated.
The following value… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.14 |
| cpqDaCntlrSerialNumber mandatory Array Controller Serial Number.
The serial number of the array controller. This field will
be a null (size 0) string if the controller does not support
serial numb… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.15 |
| cpqDaCntlrRedundancyType mandatory Array Controller Redundancy Type.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
redundancy… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.16 |
| cpqDaCntlrRedundancyError mandatory Array Controller Redundancy Error.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
redundanc… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.17 |
| cpqDaCntlrAccessModuleStatus mandatory Array Controller RAID ADG Enabler Module Status.
The following values are valid:
other (1)
Indicates that the agent does not recognize the RAID ADG… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.18 |
| cpqDaCntlrDaughterBoardType mandatory Array Controller Daughter Board Type.
The following values are valid:
other (1)
Indicates that the agent does not recognize the daughter
board ty… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.19 |
| cpqDaCntlrModel mandatory Array Controller Model.
The type of controller card. The valid types are:
Other (1)
You may need to upgrade your driver software and\or instrumen… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.2 |
| cpqDaCntlrHwLocation mandatory A text description of the hardware location of the controller.
A NULL string indicates that the hardware location could not
be determined or is irrelevant. | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.20 |
| cpqDaCntlrNumberOfBuses mandatory Array Controller Number of Buses.
This value is the number of SCSI buses on the controller. | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.21 |
| cpqDaCntlrBlinkTime mandatory Controller Physical Drive Blink Time Count.
The controller blink time variable allows the drive tray LEDs
of all physical drives attached to this controller to blin… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.3.2.2.1.1.22 |
| cpqDaCntlrRebuildPriority mandatory Array Controller Rebuild Priority.
This is the controller`s rebuild priority. The following values
are valid:
other (1)
Indicates that the instrum… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.23 |
| cpqDaCntlrExpandPriority mandatory Array Controller Expand Priority.
This is the controller`s expand priority. The following values
are valid:
other (1)
Indicates that the instrumen… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.24 |
| cpqDaCntlrNumberOfInternalPorts mandatory Array Controller Number of Internal Ports.
This value is the number of internal connectors on the
controller. | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.25 |
| cpqDaCntlrNumberOfExternalPorts mandatory Array Controller Number of External Ports.
This value is the number of external connectors on the
controller. | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.26 |
| cpqDaCntlrDriveWriteCacheState mandatory Array Controller Drive Write Cache State.
This is the controller`s drive write cache setting. The
following values are valid:
other (1)
Indicates … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.27 |
| cpqDaCntlrPartnerSerialNumber mandatory Array Controller Partner Serial Number.
The serial number of the partner array controller. This field will
be a null (size 0) string if the partner controller does… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.28 |
| cpqDaCntlrOptionRomRev mandatory Array Controller Option ROM Revision.
The option ROM revision of the chipset or HBA being used by the
B-Series controller. If the controller does not support the
o… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.29 |
| cpqDaCntlrFWRev mandatory Array Controller Firmware Revision.
The firmware revision of the drive array controller. This
value can be used to help identify a particular revision
of the contro… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.3 |
| cpqDaCntlrHbaFWRev mandatory Array Controller HBA Firmware Revision.
The firmware revision of the chipset or HBA being used by the
B-Series controller. If the controller does not support the
H… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.30 |
| cpqDaCntlrHBAModeOptionRomRev mandatory Array Controller HBA Mode Option Rom Revision.
The revision of option ROM that would run on this chipset or HBA (being
used by the B-Series controller), if it were … | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.31 |
| cpqDaCntlrCurrentTemp mandatory Array Controller Current Temperature.
This is the temperature of the array controller in degrees Celsius.
The field will contain -1 if the controller temperature … | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.32 |
| cpqDaCntlrLastLockupCode mandatory Array Controller Last Lockup Code.
The lockup code of the array controller if a lockup occurred prior
to the last controller reset. This value will be nonzero if t… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.33 |
| cpqDaCntlrEncryptionStatus mandatory Array Controller Encryption Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. Y… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.34 |
| cpqDaCntlrASICEncptSelfTestStatus mandatory Array Controller ASIC Encryption Self Test Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.35 |
| cpqDaCntlrEncryptCspNvramStatus mandatory Array Controller Encryption Critical Security Parameter NVRAM Status.
The following values are valid:
other (1)
Indicates that the instrument agent… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.36 |
| cpqDaCntlrEncryptCryptoOfficerPwdSetStatus mandatory Array Controller Encryption Crypto Officer Password Set Status.
The following values are valid:
other (1)
Indicates that the instrument agent does … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.37 |
| cpqDaCntlrEncryptCntlrPwdSetStatus mandatory Array Controller Encryption Controller Password Set Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.38 |
| cpqDaCntlrEncryptCntlrPwdAvailStatus mandatory Array Controller Encryption Controller Password Availability Status.
The following values are valid:
other (1)
Indicates that the instrument agent … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.39 |
| cpqDaCntlrUnencryptedLogDrvCreationPolicy mandatory Array Controller Unencrypted Logical Drive Creation Policy.
The following values are valid:
other (1)
Indicates that the instrument agent does not … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.40 |
| cpqDaCntlrEncryptedLogDrvCreationPolicy mandatory Array Controller Encrypted Logical Drive Creation Policy.
The following values are valid:
other (1)
Indicates that the instrument agent does not re… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.41 |
| cpqDaCntlrEncryptFWLockStatus mandatory Array Controller Encryption Firmware Lock Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize … | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.42 |
| cpqDaCntlrOperatingMode mandatory Array Controller Operating Mode.
The array controller`s current operating mode. The
following values are valid:
The following values are valid:
… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.43 |
| cpqDaCntlrSlot mandatory Array Controller Slot.
This identifies the physical slot where the array controller
resides in the system. For example, if this value is three,
the array controlle… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.5 |
| cpqDaCntlrCondition mandatory The condition of the device. This value represents the overall
condition of this controller, and any associated logical drives,
physical drives, and cache modules. | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.6 |
| cpqDaCntlrProductRev mandatory Array Controller Product Revision.
The Product Revision of the drive array controller. This value
can be used to further identify a particular revision of the
cont… | column | OctetString | .1.3.6.1.4.1.232.3.2.2.1.1.7 |
| cpqDaCntlrPartnerSlot mandatory Array Controller Partner Slot.
For duplexed array controllers, this is the slot number of the
partner controller. For non-duplexed controllers and partner
control… | column | Integer32 | .1.3.6.1.4.1.232.3.2.2.1.1.8 |
| cpqDaCntlrCurrentRole mandatory Array Controller Current Role.
For duplexed array controllers, this is the controllers current
role. The following values are valid:
other (1)
Ind… | column | Enumeration | .1.3.6.1.4.1.232.3.2.2.1.1.9 |