ASAM-SFP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
208

hostSfpConfigTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.1 · 1 row entry · 2 columns
Open in standard view 
This table contains the host shelf SFP direction configuration
information.
ALCATEL NOTE:
   TABLESIZE: 8
hostSfpConfigEntry entry .1.3.6.1.4.1.637.61.1.56.1.1
Each entry consists of a list of host shelf SFP configuration parameters.
Indexes
hostConfigSfpFaceplateNumber
Column Syntax OID
hostConfigSfpFaceplateNumber mandatory
This is host shelf SFP number on the faceplate.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..17
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.1.1.1
hostSfpDirection mandatory
The host shelf SFP can be configured as downlink or uplink. The default
is uplink.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: NA
DEFVALUE: uplink
UNITS: NA
SPARSE: N…
Enumerationr/w
Enumerated Values:
1uplink
2downlink
 .1.3.6.1.4.1.637.61.1.56.1.1.2

hostSfpConfigExtTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.2 · 1 row entry · 4 columns
Open in standard view 
This table contains the host shelf SFP configuration information 
additional to the host SFP direction configuration.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
   TABLESIZE: 24
hostSfpConfigExtEntry entry .1.3.6.1.4.1.637.61.1.56.2.1
Each entry consists of a list of host shelf SFP configuration
parameters which supplements the parameters in hostSfpConfigTable.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
Indexes
hostConfigExtSfpFaceplateNumber
Column Syntax OID
hostConfigExtSfpFaceplateNumber mandatory
This is the host shelf SFP number on the faceplate.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.2.1.1
hostSfpCableToRack mandatory
This is the Rack ID of the expansion shelf LSM which the host shelf SFP
is planned to cable to. Value 0 means that no rack is specified.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used inste…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.2.1.2
hostSfpCableToShelf mandatory
This is the Shelf ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to.
Value 0 means that no shelf is specified.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used ins…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.2.1.3
hostSfpCableToSlot mandatory
This is the Slot ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to.
Value 0 means that no slot is specified.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used inste…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.2.1.4

hostSfpStatusTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.3 · 1 row entry · 9 columns
Open in standard view 
This table contains the host shelf SFP or XFP status information.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
             
ALCATEL NOTE:
    TABLESIZE: 26
hostSfpStatusEntry entry .1.3.6.1.4.1.637.61.1.56.3.1
Each entry consists of a list of SFP or XFP status parameters.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
Indexes
hostStatusSfpFaceplateNumber
Column Syntax OID
hostStatusSfpFaceplateNumber mandatory
This is the host shelf SFP or XFP cage number.
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example, if the XFP cage has…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.3.1.1
lanxPortNumber mandatory
This is the Physical LANX or IHUB port to which the SFP or XFP is
connected to. For an SHUB system, the lanxPortNumber here corresponds
to lanxInterfaceIndex in the LANX MIB. For an IHUB system, the
lanxPortNumber to…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.3.1.2
hostSfpDownlinkStatus mandatory
This is the host shelf SFP or XFP status.
ok (1): The SFP or XFP is operational.
sfpNotPresent (2): The SFP or XFP cage is empty.
los (3): The SFP or XFP has detected Loss…
Enumeration
Enumerated Values:
1ok
2sfpNotPresent
3los
4txFail
5invalidAlcatelId
6unknown
7sfpControlFail
8notApplicable
9txFailAndLos
10sfpPlanDetectMismatch
 .1.3.6.1.4.1.637.61.1.56.3.1.3
hostSfpCabledToRack mandatory
This is the Rack ID of the expansion shelf LSM to which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
WARNING This table is now deprecated. ltHostSfpStatusTable should…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.3.1.4
hostSfpCabledToShelf mandatory
This is the Shelf ID of the expansion shelf LSM which the host shelf
SFP is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
WARNING This table is now deprecated. ltHostSfpStatusTable should …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.3.1.5
hostSfpCabledToSlot mandatory
This is the Slot ID of the expansion shelf LSM which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
WARNING This table is now deprecated. ltHostSfpStatusTable should b…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.3.1.6
hostSfpType mandatory
This variable indicates the type of the SFP or XFP, as read from the
device.
It is a bitmap represented as a sum, therefore, it can represent
multiple types (combination of types) simultaneously.
The SFP type bits (0..…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.3.1.7
hostSfpCablingMismatch mandatory
This is the host shelf SFP cabling mismatch status:
noMismatch(1): no cabling mismatch is detected.
unexpectedRemoteLt(2): a remote LT is detected at an unassigned
downlink SFP po…
Enumeration
Enumerated Values:
1noMismatch
2unexpectedRemoteLt
3assignmentMismatch
4incompatibleShelf
 .1.3.6.1.4.1.637.61.1.56.3.1.8
hostSfpCabledToPhysAddress mandatory
The physical (MAC) address of the remote interface that is
cabled to this host shelf SFP.
If the remote interface does not have such an address or
the address is not yet discovered, this object would
contain an octet st…
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.637.61.1.56.3.1.9

expSfpStatusTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.4 · 1 row entry · 7 columns
Open in standard view 
This table contains the expansion shelf SFP status information.
ALCATEL NOTE:
    TABLESIZE: 312  (24 + 288)
expSfpStatusEntry entry .1.3.6.1.4.1.637.61.1.56.4.1
Each entry consists of the expansion shelf SFP status.
Indexes
expSfpRack expSfpShelf expSfpSlot
Column Syntax OID
expSfpRack mandatory
This is the Rack ID of the expansion shelf SFP (actually its
corresponding LSM).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DE…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.4.1.1
expSfpShelf mandatory
This is the Shelf ID of the expansion shelf SFP (actually
its corresponding LSM).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..4
DEFVALUE: NA
UNITS: NA
SPARSE: NO
D…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.4.1.2
expSfpSlot mandatory
This is the Slot ID of the expansion shelf SFP (actually its
corresponding LSM).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: DEP / depends on the shelf type.
DEFVALUE: NA
U…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.4.1.3
expSfpStatus mandatory
This is the status of the expansion shelf SFP:
ok (1): the expansion shelf SFP is operational.
sfpNotPresent (2): no SFP present.
los (3): LOS is detected by the expansion shelf SFP.
…
Enumeration
Enumerated Values:
1ok
2sfpNotPresent
3los
4txFail
5invalidAlcatelId
6unknown
7sfpControlFail
8txFailAndLos
 .1.3.6.1.4.1.637.61.1.56.4.1.4
hostSfpFaceplateNumber mandatory
This is the faceplate number of the host shelf SFP which the expansion
shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any
host shelf SFP, the value of the corresponding hostSfpFaceplateNumber
is set …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.4.1.5
expSfpType mandatory
This variable indicates the type of the SFP. It is a bitmap represented
as a sum, therefore, it can represent multiple types (combination
of types) simultaneously. The various bit positions are:
bit 0 (1): 1000BASE…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.4.1.6
hostSfpLogSlotId mandatory
This is the LogSlotId of the host LT which the expansion
shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any
host shelf SFP, the value of the corresponding hostSfpLogSlotId
is set to 0.
ALCATEL NOTE:
…
ASAM-EQUIP-MIBEqptSlotIndex
Textual Convention: ASAM-EQUIP-MIBEqptSlotIndex Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.56.4.1.7

sfpDiagTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.5 · 1 row entry · 53 columns
Open in standard view 
The primary purpose of this read-only table:  allow the SNMP 
manager to read real-time diagnostic measurements (e.g. the 
SFP's received optical power level) from the A2 bank of a 
manager-specified SFP.  The A2 bank and content are defined in 
the SFF-8472 standard (available at ftp.seagate.com).  
          
The table is indexed to allow support for any SFP cage in 
the system.  
          
In a particular release, SFP diagnostics support for a 
particular assembly may or may not be provided, and support for 
all the cages on a supported assembly may or may not be 
provided.  If an assembly has any supported SFP cages, a row will be 
present in this table for each of its SFP cages.  
          
A row is present whether or not the SFP cage contains an SFP,
and whether or not the SFP supports diagnostics.  If the SFP 
cage contains an SFP, some status information (e.g. LOS and 
TxFault status) is available in the row.  An enumerated object 
(sfpDiagAvailable) is used to indicate the condition/error 
(or no error) encountered when attempting to read the 
diagnostics information for the specified cage (e.g. cage 
empty, or A2 checksum failed). 
          
Details are documented with the individual objects.
          
The following table size field is set to 'not applicable', 
since it does not make sense for the SNMP manager to cache the 
values in this table.  The values will be different each time 
they are read from agent.
          
ALCATEL NOTE:
   TABLESIZE: NA
   DESCR:  NA
sfpDiagEntry entry .1.3.6.1.4.1.637.61.1.56.5.1
The index for the sfpDiagTable identifies an SFP cage
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number.
Indexes
sfpDiagLogicalSlot sfpDiagSfpFaceplateNumber
Column Syntax OID
sfpDiagLogicalSlot mandatory
This is the first index of the sfpDiagTable.

Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If that…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.5.1.1
sfpDiagSfpFaceplateNumber mandatory
This is the second index of the sfpDiagTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special c…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.5.1.2
sfpDiagAvailable mandatory
A column in the sfpDiagTable, with the following code points.

noError - valid values for all objects in this row (e.g.
sfpDiagRxPower) were obtained from the SFP in the specified
cage.
cageDoesNotSu…
Enumeration
Enumerated Values:
1noError
2cageDoesNotSupportDiag
3cageEmpty
4cageDoesNotSupportA2
5a0ReadFailed
6a0ChecksumFailed
7sfpDoesNotSupportA2
8a2ReadFailed
9a2ChecksumFailed
 .1.3.6.1.4.1.637.61.1.56.5.1.3
sfpDiagLOS mandatory
A column in the sfpDiagTable, with the following code
points.

los - the SFP in the specified SFP cage has detected Loss of
Signal (on its receiver).
noLos - the SFP in the specified SFP cage has detec…
Enumeration
Enumerated Values:
1los
2noLos
3notAvailable
 .1.3.6.1.4.1.637.61.1.56.5.1.4
sfpDiagTxFault mandatory
A column in the sfpDiagTable, with the following code
points.

txFault - the SFP in the specified SFP cage has detected a
TxFault error (as defined in SFF-8472).
noTxFault - the SFP in the specified SF…
Enumeration
Enumerated Values:
1txFault
2noTxFault
3notApplicable
4notAvailable
 .1.3.6.1.4.1.637.61.1.56.5.1.5
sfpDiagTxPower mandatory
A column in the sfpDiagTable, containing the freshly-measured
transmit power of the specified SFP, encoded into a string.

Five types of values are supported. In the following text,
strings are enclosed…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.6
sfpDiagRxPower mandatory
A column in the sfpDiagTable, containing the freshly-measured
received power of the specified SFP, encoded into a string.

Five types of values are supported. In the following text,
strings are enclosed…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.7
sfpDiagTxBiasCurrent mandatory
A column in the sfpDiagTable, containing the freshly-measured
transmit bias current of the specified SFP, encoded into a
string.

Four types of values are supported. In the following text,
strings are …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.8
sfpDiagSupplyVoltage mandatory
A column in the sfpDiagTable, containing the freshly-measured
supply voltage of the specified SFP, encoded into a string.

Three types of values are supported. In the following text,
strings are enclose…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.9
sfpDiagTemperature mandatory
A column in the sfpDiagTable, containing the freshly-measured
temperature of the specified SFP, encoded into a string.

Two types of values are supported. In the following text,
strings are enclosed in …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.10
sfpDiagTCAStatusTemperature mandatory
A column in the sfpDiagTable, containing the freshly-measured temperature
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PE…
SfpDiagTCAStatus
Textual Convention: SfpDiagTCAStatus Enumeration
Type Values:
1notAvailable
2normal
3exceededLowWarning
4exceededLowAlarm
5exceededHighWarning
6exceededHighAlarm
 .1.3.6.1.4.1.637.61.1.56.5.1.11
sfpDiagTCAStatusVoltage mandatory
A column in the sfpDiagTable, containing the freshly-measured voltage
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
For XFP, this parameter will display as NotAvailable in case it is not
…
SfpDiagTCAStatus
Textual Convention: SfpDiagTCAStatus Enumeration
Type Values:
1notAvailable
2normal
3exceededLowWarning
4exceededLowAlarm
5exceededHighWarning
6exceededHighAlarm
 .1.3.6.1.4.1.637.61.1.56.5.1.12
sfpDiagTCAStatusBiasCurrent mandatory
A column in the sfpDiagTable, containing the freshly-measured bias current
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
P…
SfpDiagTCAStatus
Textual Convention: SfpDiagTCAStatus Enumeration
Type Values:
1notAvailable
2normal
3exceededLowWarning
4exceededLowAlarm
5exceededHighWarning
6exceededHighAlarm
 .1.3.6.1.4.1.637.61.1.56.5.1.13
sfpDiagTCAStatusTxPower mandatory
A column in the sfpDiagTable, containing the freshly-measured received
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
…
SfpDiagTCAStatus
Textual Convention: SfpDiagTCAStatus Enumeration
Type Values:
1notAvailable
2normal
3exceededLowWarning
4exceededLowAlarm
5exceededHighWarning
6exceededHighAlarm
 .1.3.6.1.4.1.637.61.1.56.5.1.14
sfpDiagTCAStatusRxPower mandatory
A column in the sfpDiagTable, containing the freshly-measured transmit
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
…
SfpDiagTCAStatus
Textual Convention: SfpDiagTCAStatus Enumeration
Type Values:
1notAvailable
2normal
3exceededLowWarning
4exceededLowAlarm
5exceededHighWarning
6exceededHighAlarm
 .1.3.6.1.4.1.637.61.1.56.5.1.15
sfpDiagRSSIProfileId mandatory
Indicates the RSSI TCA profile, refer to SfpRSSIProfileTable.
65535 means auto mode. When configured 65535, when sfp is plugged in, system will detect sfp type and associate related sfp rssi profile. User cannot modify …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.5.1.16
sfpDiagRSSIState mandatory
Enable(1) and Disable(2) to RSSI function on port level.

ALCATEL NOTE:
ACCESS: NA usage: OPT
persistent: YES INSRVMOD:YES
RANGE:1,2 DEFVALUE: 2
UNITS: NA …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.5.1.17
sfpDiagRSSIRxPowerAlmLow mandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value,then alarm OLTRXPWLO will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.18
sfpDiagRSSIRxPowerAlmHigh mandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network la…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.19
sfpDiagRSSIRxPowerWarnLow mandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.20
sfpDiagRSSIRxPowerWarnHigh mandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.21
sfpDiagRSSITxPowerAlmLow mandatory
this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,alarm OLTTXPWLO will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
For…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.22
sfpDiagRSSITxPowerAlmHigh mandatory
this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,alarm OLTTXPWHI will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.23
sfpDiagRSSITxPowerWarnLow mandatory
this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,alarm OLTTXPWLOWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network l…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.24
sfpDiagRSSITxPowerWarnHigh mandatory
this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,alarm OLTTXPWHIWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.25
sfpDiagRSSITemperatureAlmLow mandatory
this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then alarm OLTTEMPLO will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicat…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.26
sfpDiagRSSITemperatureAlmHigh mandatory
this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,alarm OLTTEMPHI will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated b…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.27
sfpDiagRSSITemperatureWarnLow mandatory
this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then alarm OLTTEMPLOWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.28
sfpDiagRSSITemperatureWarnHigh mandatory
this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,alarm OLTTEMPHIWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is ind…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.29
sfpDiagRSSIBiasAlmLow mandatory
this object indicates the threshold for OLTBIASLO. when bias is less than this value, then alarm OLTBIASLO will be reported.
For CFP4,this is the module level threshold.The network lane threshold is indicated by sfpDiag…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.30
sfpDiagRSSIBiasAlmHigh mandatory
this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then alarm OLTBIASHI will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.31
sfpDiagRSSIBiasWarnLow mandatory
this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then alarm OLTBIASLOWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indica…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.32
sfpDiagRSSIBiasWarnHigh mandatory
this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then alarm OLTBIASHIWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indi…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.33
sfpDiagRSSIVoltageAlmLow mandatory
this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then alarm OLTVOLLO will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.34
sfpDiagRSSIVoltageAlmHigh mandatory
this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then alarm OLTVOLHI will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP ca…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.35
sfpDiagRSSIVoltageWarnLow mandatory
this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then alarm OLTVOLLOWARN will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.36
sfpDiagRSSIVoltageWarnHigh mandatory
this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then alarm OLTVOLHIWARN will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specifie…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.37
sfpDiagRSSIExtRxPowerAlmLow mandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.38
sfpDiagRSSIExtRxPowerAlmHigh mandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'No…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.39
sfpDiagRSSIExtRxPowerWarnLow mandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs '…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.40
sfpDiagRSSIExtRxPowerWarnHigh mandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.41
sfpDiagRSSIExtTxPowerAlmLow mandatory
this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,alarm EXTOLTTXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.42
sfpDiagRSSIExtTxPowerAlmHigh mandatory
this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,alarm EXTOLTTXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'N…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.43
sfpDiagRSSIExtTxPowerWarnLow mandatory
this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,alarm EXTOLTTXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON S…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.44
sfpDiagRSSIExtTxPowerWarnHigh mandatory
this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,alarm EXTOLTTXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.45
sfpDiagRSSIExtBiasAlmLow mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then alarm EXTOLTBIASLO will be reported.
For CFP4, this object indicates the threshold for OLTBIASLO.When any n…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.46
sfpDiagRSSIExtBiasAlmHigh mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then alarm EXTOLTBIASHI will be reported.
For CFP4, this object indicates the threshold for OLTBIASHI.When any…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.47
sfpDiagRSSIExtBiasWarnLow mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value,then alarm EXTOLTBIASLOWARN will be reported.
For CFP4, this object indicates the threshold for OLTBIASLOWARN…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.48
sfpDiagRSSIExtBiasWarnHigh mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value,then alarm EXTOLTBIASHIWARN will be reported.
For CFP4, this object indicates the threshold for OLTBIASHIWA…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.49
sfpDiagRSSIExtTemperatureAlmLow mandatory
This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLTTEMPLO will be reported.
The module leve…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.50
sfpDiagRSSIExtTemperatureAlmHigh mandatory
This object indicates the laser temperature high alarm threshold of network lanefor CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm OLTTEMPHI will be reported.
The module le…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.51
sfpDiagRSSIExtTemperatureWarnLow mandatory
This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLTTEMPLOWARN will be reported.
The modul…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.52
sfpDiagRSSIExtTemperatureWarnHigh mandatory
This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm OLTTEMPHIWARN will be reported.
The mo…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.5.1.53

sfpInventoryTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.6 · 1 row entry · 13 columns
Open in standard view 
The primary purpose of this read-only table:  allow the SNMP 
manager to read read-only EEPROM contents from EEPROM of SFP
          
Details are documented with the individual objects.
          
The following table size field is set to 'not applicable', 
since it does not make sense for the SNMP manager to cache the 
values in this table.  The values will be different each time 
they are read from agent.
          
ALCATEL NOTE:
   TABLESIZE: NA
   DESCR:  NA
sfpInventoryEntry entry .1.3.6.1.4.1.637.61.1.56.6.1
The index for the sfpInventoryTable identifies an SFP cage
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number.
Indexes
sfpInvLogicalSlot sfpInvFaceplateNumber
Column Syntax OID
sfpInvLogicalSlot mandatory
This is the first index of the sfpInventoryTable.

Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.6.1.1
sfpInvFaceplateNumber mandatory
This is the second index of the sfpInventoryTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpInvFaceplateNumber=0 is used (i.e. zero is not a
special …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.6.1.2
sfpInvAvailable mandatory
A column in the sfpInventoryTable, with the following code points.

noError - valid values for all objects in this row (e.g.
sfpDiagRxPower) were obtained from the SFP in the specified
cage.
cageEmpt…
Enumeration
Enumerated Values:
1noError
2cageEmpty
3cageDoesNotSupportA2
4a0ReadFailed
5a0ChecksumFailed
6sfpDoesNotSupportA2
7a2ReadFailed
8a2ChecksumFailed
 .1.3.6.1.4.1.637.61.1.56.6.1.3
sfpInvFiberType mandatory
A column in the sfpInventoryTable, containing the fiber type of
the specified SFP/SFP+.
For XFP, it is always singleMode

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
…
Enumeration
Enumerated Values:
1singleMode
2multiMode
3notAvailable
 .1.3.6.1.4.1.637.61.1.56.6.1.4
sfpInvAluPartNumber mandatory
A column in the sfpInventoryTable, containing the Alcatel-Lucent part number
of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD:…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.5
sfpInvCLEIcode mandatory
A column in the sfpInventoryTable, containing the CLEI code
of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.6
sfpInvTxWavelength mandatory
A column in the sfpInventoryTable, containing the transmit wavelength
of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.7
sfpInvAdditionalInfo mandatory
A column in the sfpInventoryTable, containing the customer specific
additional information of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST:…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.8
sfpInvMfgName mandatory
A column in the sfpInventoryTable, containing the manufacturer or
vendor name of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INS…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.9
sfpInvMfgOUICode mandatory
A column in the sfpInventoryTable, containing the manufacturer or
vendor OUI code of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.10
sfpInvMfgSerialNumber mandatory
A column in the sfpInventoryTable, containing the manufacturer or
vendor serial number of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.11
sfpInvMfgDate mandatory
A column in the sfpInventoryTable, containing the manufactured date
of the specified SFP/SFP+/XFP, encoded into a string.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.6.1.12
sfpInvSpecificalType mandatory
indicate basic type of the specified SFP(+)/XFP/QSFP(+).

ALCATEL NOTE:
ACCESS: NA
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NA
DESCR…
Enumeration
Enumerated Values:
0sfpUnknown
1px20
2px20plus
3prx-t1
4pr-t2
5prx-t3
6pr-t4
7bPlusCAA
8bPlusIAC
9cPlusCBA
10cPlusIBC
11base10G-ER
12base10G-SR
13base10G-LR
14base1000-T
15base1000-LX
16base1000-BX10-U
17base1000-EX
18base1000-ZX
19n1-c
20n2a-c
21n2b-c
22base1000-SX
23base1000-CX
24base1000-BX10-D
25base100-FX
26base100-TX
27base2500
28base10G-LRM
29base10G-EW
30base10G-SW
31base10G-LW
32base40G-LR4
33base40G-SR4
34base40G-CR4
35base100-LX
36base100-BX10-U
37base100-BX10-D
38base1000-VX
39e1eth
40e3eth
41stm1eth
42e1tdm
43bPlusIONU
44base10G-BX40-U
45base10G-BX40-D
46base1000-BX40-U
47base1000-BX40-D
48base1000-BX20-U
49base1000-BX20-D
50base10G-ZR-CWDM
51base10G-ZR-DWDM
52n1-i
53n2a-i
54n2b-i
55base100G-LR4
56base100G-SR4
57base10G-BX10-U
58base10G-BX10-D
59base1000-ZR-CWDM
60base10G-ZR
61base10G-BX80-U
62base10G-BX80-D
63base1000-BX80-U
64base1000-BX80-D
65base100G-ER4
66cPlusPlusI
 .1.3.6.1.4.1.637.61.1.56.6.1.13

sfpRSSIProfileTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.7 · 1 row entry · 41 columns
Open in standard view 
This object contains a table for defining RSSI for SFP/XFP/CFP4 by operator, which could be used for all NT/NTIO cards and DSL/GPON/EPON line cards.
ALCATEL NOTE:
SUPPORT: YES   TABLESIZE: DEP
sfpRSSIProfileEntry entry .1.3.6.1.4.1.637.61.1.56.7.1
An entry in the sfpRSSIProfileTable.
Row creation : an entry is created when operator creates SfpRSSI profile.
Row deletion : an entry is created when operator deletes SfpRSSI profile.
ALCATEL NOTE:
SUPPORT: YES
Indexes
sfpRSSIProfileIndex
Column Syntax OID
sfpRSSIProfileIndex mandatory
This object is the index to the sfpSfpRSSIProfileTable.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: NO
RANGE: NA DEFVALUE: NA
UNITS: NA SPAR…
ASAM-TC-MIBAsamProfileIndex
Textual Convention: ASAM-TC-MIBAsamProfileIndex Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.56.7.1.1
sfpRSSIProfileName mandatory
The corresponding name for a given profile id.
The name corresponding to the ProfileId must also be unique.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: NO
RANGE: NA DEFV…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.7.1.2
sfpRSSIProfileRefCount mandatory
Indicates the number of entities using this profile. If the
reference count is greater than 0, then this profile is 'in use',
and may NOT be deleted. If the value is 0, then this profile is
'not in use', and can be dele…
ASAM-TC-MIBAsamProfileRefCount
Textual Convention: ASAM-TC-MIBAsamProfileRefCount Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.637.61.1.56.7.1.3
sfpRSSIRowStatus mandatory
This object is used to create a new row or delete an row.
ALCATEL NOTE:
ACCESS: NA usage: MAND
persistent: YES INSRVMOD:YES
RANGE:1,4,6 DEFVALUE: NA
UNITS: NA SPARSE: NA
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.637.61.1.56.7.1.4
sfpRSSIRxPowerAlmLow mandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then
alarm OLTRXPWLO will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.5
sfpRSSIRxPowerAlmHigh mandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,
then alarm OLTRXPWHI will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network l…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.6
sfpRSSIRxPowerWarnLow mandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,
alarm OLTRXPWLOWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.7
sfpRSSIRxPowerWarnHigh mandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,
alarm OLTRXPWHIWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for networ…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.8
sfpRSSITxPowerAlmLow mandatory
this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,
alarm OLTTXPWLO will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
F…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.9
sfpRSSITxPowerAlmHigh mandatory
this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,
alarm OLTTXPWHI will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.10
sfpRSSITxPowerWarnLow mandatory
this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,
alarm OLTTXPWLOWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.11
sfpRSSITxPowerWarnHigh mandatory
this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,
alarm OLTTXPWHIWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for networ…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.12
sfpRSSITemperatureAlmLow mandatory
this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then
alarm OLTTEMPLO will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indica…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.13
sfpRSSITemperatureAlmHigh mandatory
this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,
alarm OLTTEMPHI will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.14
sfpRSSITemperatureWarnLow mandatory
this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then
alarm OLTTEMPLOWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold i…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.15
sfpRSSITemperatureWarnHigh mandatory
this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,
alarm OLTTEMPHIWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is i…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.16
sfpRSSIBiasAlmLow mandatory
this object indicates the threshold for OLTBIASLO. when bias is less than this value, then
alarm OLTBIASLO will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.17
sfpRSSIBiasAlmHigh mandatory
this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then
alarm OLTBIASHI will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated b…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.18
sfpRSSIBiasWarnLow mandatory
this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then
alarm OLTBIASLOWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indic…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.19
sfpRSSIBiasWarnHigh mandatory
this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then
alarm OLTBIASHIWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is ind…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.20
sfpRSSIVoltageAlmLow mandatory
this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then
alarm OLTVOLLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES I…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.21
sfpRSSIVoltageAlmHigh mandatory
this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then
alarm OLTVOLHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.22
sfpRSSIVoltageWarnLow mandatory
this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then
alarm OLTVOLLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.23
sfpRSSIVoltageWarnHigh mandatory
this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then
alarm OLTVOLHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.24
sfpRSSIExtRxPowerAlmLow mandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then
alarm OLTRXPWLO will be reported.

ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.25
sfpRSSIExtRxPowerAlmHigh mandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,
then alarm OLTRXPWHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANG…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.26
sfpRSSIExtRxPowerWarnLow mandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,
alarm OLTRXPWLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RA…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.27
sfpRSSIExtRxPowerWarnHigh mandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,
alarm OLTRXPWHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
R…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.28
sfpRSSIExtTxPowerAlmLow mandatory
this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,
alarm EXTOLTTXPWLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RA…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.29
sfpRSSIExtTxPowerAlmHigh mandatory
this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,
alarm EXTOLTTXPWHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RAN…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.30
sfpRSSIExtTxPowerWarnLow mandatory
this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,
alarm EXTOLTTXPWLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: Y…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.31
sfpRSSIExtTxPowerWarnHigh mandatory
this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,
alarm EXTOLTTXPWHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD:…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.32
sfpRSSIExtBiasAlmLow mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then
alarm EXTOLTBIASLO will be reported.
For CFP4,this object indicates the threshold of network lane for OLTBI…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.33
sfpRSSIExtBiasAlmHigh mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then
alarm EXTOLTBIASHI will be reported.
For CFP4,this object indicates the threshold of network lane for OLT…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.34
sfpRSSIExtBiasWarnLow mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value, then
alarm EXTOLTBIASLOWARN will be reported.
For CFP4,this object indicates the threshold of network lane f…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.35
sfpRSSIExtBiasWarnHigh mandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value, then
alarm EXTOLTBIASHIWARN will be reported.
For CFP4,this object indicates the threshold of network lane…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.36
sfpRssiProfileType mandatory
RSSI profile type
Enumerationr/w
Enumerated Values:
1olt
2ont
 .1.3.6.1.4.1.637.61.1.56.7.1.37
sfpRSSIExtTemperatureAlmLow mandatory
This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,alarm OLTTEMPLO will be reported.
ALCATEL NOTE:
ACCESS…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.38
sfpRSSIExtTemperatureAlmHigh mandatory
This object indicates the laser temperature high alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is large than this value,alarm OLTTEMPHI will be reported.
ALCATEL NOTE:
ACCE…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.39
sfpRSSIExtTemperatureWarnLow mandatory
This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,alarm OLTTEMPLOWARN will be reported.
ALCATEL NOTE:
…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.40
sfpRSSIExtTemperatureWarnHigh mandatory
This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is large than this value,alarm OLTTEMPHIWARN will be reported.
ALCATEL NOTE…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.7.1.41

dsx1ClockConfigTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.10 · 1 row entry · 10 columns
Open in standard view 
This table contains the 2E1/DS1 SFP Clock configuration
information.
ALCATEL NOTE:
   TABLESIZE: 10
dsx1ClockConfigEntry entry .1.3.6.1.4.1.637.61.1.56.10.1
Each entry consists of a list of 2E1/DS1 SFP general configuration parameters.
Indexes
dsx1SfpClkConfigLogicalSlot dsx1SfpClkConfigFaceplateNumber
Column Syntax OID
dsx1SfpClkConfigLogicalSlot mandatory
This is the first index of the dsx1ClockConfig Table.

Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.10.1.1
dsx1SfpClkConfigFaceplateNumber mandatory
This is the second index of the dsx1ClockConfigTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
s…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.10.1.2
dsx1SfpClkConfigSyncSource mandatory
Select as sync source between clock recovered from Serdes or Tributary clock.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..3
DEFVALUE: 3
UNITS: NA
…
Enumerationr/w
Enumerated Values:
1tributary1
2tributary2
3serdes
 .1.3.6.1.4.1.637.61.1.56.10.1.3
dsx1SfpClkConfigDegradeAlarm mandatory
Enable degrade alarm on los pin.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: Only Default value ena…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.10.1.4
dsx1SfpClkConfigSoftwareReset mandatory
noSoftwareReset (default value), this is the value that is returned when read the attribute.
softwareReset, this is the value that can be set by the manager. This value will trigger a software reset.
.
…
Enumerationr/w
Enumerated Values:
0softwareReset
1noSoftwareReset
 .1.3.6.1.4.1.637.61.1.56.10.1.5
dsx1SfpClkAlarmState mandatory
serdesFailAlarm (1):Failure of the SERDES clock alarm (active high)
tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high)
tributary2FailAlarm (4):Failure alarm: the tr…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.10.1.6
dsx1SfpClkConfigClkControlSignal mandatory
SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal
(PWM) between DPLL output and a ~4MHZ square wave signal
generated dividing the same system clock.
0 Square wave generated from system clock.
1 Con…
Enumerationr/w
Enumerated Values:
0squarewave
1pll
 .1.3.6.1.4.1.637.61.1.56.10.1.7
dsx1SfpClkConfigClkSource mandatory
CLK_SOURCE_SEL. This bit is used to select between local VTCXO and
CLOCK FROM SERDES as synchronization source for the signals:
CK_EN-25M and CK-EN-ETSI-ANSI
1 CK-125M-REC
0 CK-125M-LOC

ALCATEL NOTE:
…
Enumerationr/w
Enumerated Values:
0clk125mloc
1clk125mrec
 .1.3.6.1.4.1.637.61.1.56.10.1.8
dsx1SfpClkRowStatus mandatory
This object is used to create a new row or delete an
existing row in this table. The possible valid values are:
(1) active
(4) createdAndGo
(6) destroy
To create an entry in this table, this object should be set t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.637.61.1.56.10.1.9
dsx1SfpClkConfState mandatory
Clock Configuration state bitmap.
bit 0: high value indicates SyncSource Configuration fail
bit 1: high value indicates DegradeAlarm Configuration fail
bit 2: high value indicates SoftwareReset Configuration fail
b…
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.637.61.1.56.10.1.10

dsx1GeneralConfigTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.11 · 1 row entry · 11 columns
Open in standard view 
This table contains the 2E1/DS1 SFP General configuration
information.
ALCATEL NOTE:
   TABLESIZE: 11
dsx1GeneralConfigEntry entry .1.3.6.1.4.1.637.61.1.56.11.1
Each entry consists of a list of 2E1/DS1 SFP general configuration parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable
Indexes
No indexes recorded
Column Syntax OID
dsx1SfpReadyStatus mandatory
This is the host SFP status.
ready (0):
notready (1):

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: No
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: SFP Ready state
Enumeration
Enumerated Values:
0notready
1ready
 .1.3.6.1.4.1.637.61.1.56.11.1.1
dsx1SfpGenConfigMarket mandatory
ETSI (0): used for ETSI Market for E1 Lines.
ANSI (1): used for ANSI Market for T1/DS1 Lines.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0
DEFVALUE: 0
UNITS: N…
Enumerationr/w
Enumerated Values:
0etsi
1ansi
 .1.3.6.1.4.1.637.61.1.56.11.1.2
dsx1SfpGenConfigTributary1 mandatory
Enable/Disable Tributary1.
disable (0): disable Tributary 1.
enable (1): enable Tributary 1.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS:…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.11.1.3
dsx1SfpGenConfigTributary2 mandatory
Enable/Disable Tributary2.
disable (0): Disable Tributary 2.
enable (1): enable Tributary 0.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS:…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.11.1.4
dsx1SfpGenConfigSERDES mandatory
disable (0): Disable SERDES device.
enable (1): enable SERDES device.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: O…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.11.1.5
dsx1SfpGenConfigSERDESLoopBack mandatory
Enable of SERDES device. When held low, the SERDES
device enters in an ultralow-power idle state and
the transmitter output pins are set to high impedance
state
.
disable (0): Disable SERDES LoopBack.
en…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.11.1.6
dsx1SfpGenConfigSGMIILocalLoopBack mandatory
disable (0): SGMII local loopback disable towards CESoP.
enable (1): SGMII local loopback enable towards CESoP.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.11.1.7
dsx1SfpGenConfigSGMIIRemoteLoopBack mandatory
disable (0): SGMII remote loopback disable towards serdes.
enable (1): SGMII remote loopback enable towards serdes.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.637.61.1.56.11.1.8
dsx1SfpGenConfigLIUReset mandatory
reset (0): A low level value (for more than 100ns) forces the LIU to reset state.
This is the value that can be set by the manager. This value will trigger a LIU reset.
noReset (1): This is the value tha…
Enumerationr/w
Enumerated Values:
0reset
1noReset
 .1.3.6.1.4.1.637.61.1.56.11.1.9
dsx1SfpGenConfigLIUHighImpedence mandatory
low (0):
high (1): A high level value places all transmitter drivers of the LIU in high Impedence state.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0.1
DEFVALUE: …
Enumerationr/w
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.637.61.1.56.11.1.10
dsx1SfpGenConfigState mandatory
General Configuration state bitmap.
bit 0: high value indicates Market Configuration fail
bit 1: high value indicates Tributory1 Configuration fail
bit 2: high value indicates Tributory2 Configuration fail
bit 3: …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.11.1.11

dsx1PWTDMInterfaceTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.12 · 1 row entry · 4 columns
Open in standard view 
This table contains the 2E1/DS1 SFP PW TDM interface  configuration
information.
ALCATEL NOTE:
   TABLESIZE: 4
dsx1PWTDMInterfaceEntry entry .1.3.6.1.4.1.637.61.1.56.12.1
Each entry consists of a list of 2E1/DS1 SFP TDM Interface parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable
Indexes
No indexes recorded
Column Syntax OID
dsx1PWTDMInterfaceMarket mandatory
etsi(0): used for ETSI Market for E1 Lines.
ansi (1): used for ANSI Market for T1/DS1 Lines.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
…
Enumerationr/w
Enumerated Values:
0etsi
1ansi
 .1.3.6.1.4.1.637.61.1.56.12.1.1
dsx1PWTDMInterfaceWindowLength mandatory
Window length measured in unit of 10 ms.
Eg. wndow_len = 10 means window is 10*10 = 100ms long

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..255
DEFVALUE: 10
UNITS: milliseconds…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.12.1.2
dsx1PWTDMInterfaceWindowNumber mandatory
Consecutively detected window number.
Eg. wndow_num = 20 means if packets lost in consecutive 20
windows, then assert CESalarm (Circuit emulation service alarm); otherwise, deassert CESalarm

ALCATEL NOTE:…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.12.1.3
dsx1PWTDMInterfaceConfState mandatory
PWTDM Interface Configuration state bitmap.
bit 0: high value indicates Market Configuration fail
bit 1: high value indicates Window Length Configuration fail
bit 2: high value indicates Window Number Configuration …
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.637.61.1.56.12.1.4

dsx1PWTDMConfigTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.13 · 1 row entry · 19 columns
Open in standard view 
This table contains the 2E1/DS1 SFP TDMoP pseudowire  configuration
information.
ALCATEL NOTE:
   TABLESIZE: 19
dsx1PWTDMConfigEntry entry .1.3.6.1.4.1.637.61.1.56.13.1
Each entry consists of a list of 2E1/DS1 SFP TDMoP parameters.
Indexes
dsx1SfpPWTDMLogicalSlot dsx1SfpPWTDMFaceplateNumber dsx1PWTDMTributaryIndex
Column Syntax OID
dsx1SfpPWTDMLogicalSlot mandatory
This is the first index of the dsx1PWTDMConfig Table.

Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.13.1.1
dsx1SfpPWTDMFaceplateNumber mandatory
This is the second index of the dsx1PWTDMConfig Table.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.13.1.2
dsx1PWTDMTributaryIndex mandatory
This is the third index of the dsx1PWTDMConfigTable.

Normally, this object used to select the tributary selecton (1 or 2 or 3) of the 2xE1/DS1 FPGA
where value 1 selects tributary 1, value 2 selects…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.13.1.3
dsx1PWTDMChannel mandatory
Chan_ena
0: close this channel;
1: open this channel

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Enumerationr/w
Enumerated Values:
0close
1open
 .1.3.6.1.4.1.637.61.1.56.13.1.4
dsx1PWTDMRtpMode mandatory
Rtp_present
0: rtp is not present, configure to ACR mode;
1: rtp is present, configure DCR mode

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SP…
Enumerationr/w
Enumerated Values:
0acr
1dcr
 .1.3.6.1.4.1.637.61.1.56.13.1.5
dsx1PWTDMPacketLength mandatory
Config packet length bits (13:0)

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...16382
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.13.1.6
dsx1PWTDMSourceAddressPointer mandatory
SA select 2 bits field (TDM2Eth)
00 - Select Source Address 0
01 - Select Source Address 1
10 - Select Source Address 2
11 - Select Source Address 3

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRV…
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.637.61.1.56.13.1.7
dsx1PWTDMSourceAddress mandatory
MAC SA for each tributary

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
r/w .1.3.6.1.4.1.637.61.1.56.13.1.8
dsx1PWTDMDestinationMac mandatory
MAC DA for each tributary

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
r/w .1.3.6.1.4.1.637.61.1.56.13.1.9
dsx1PWTDMPriority mandatory
802.1p 3 bits field.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.637.61.1.56.13.1.10
dsx1PWTDMVlanId mandatory
Vlan ID.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...4095
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.637.61.1.56.13.1.11
dsx1PWTDMECIDEthToTDM mandatory
ECID (Emulated Circuit Identifer) 20 bit field Eth2Tdm.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..1048575
DEFVALUE: NA
UNITS: NA
SPARSE: NO
…
Integer32r/w
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.637.61.1.56.13.1.12
dsx1PWTDMECIDTDMToEth mandatory
ECID (Emulated Circuit Identifer) 20 bit field Tdm2Eth.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..1048575
DEFVALUE: NA
UNITS: NA
SPARSE: NO…
Integer32r/w
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.637.61.1.56.13.1.13
dsx1PWTDJitterBufferSize mandatory
Jitter Buffer Queue size. Actual size + configurable size + 1. Example configuring size of 7 mean buffer size of 8 packets

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
…
Integer32r/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.637.61.1.56.13.1.14
dsx1PWTDMConsequenceNumber mandatory
New Sequence number

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.637.61.1.56.13.1.15
dsx1PWTDMClock mandatory
TDM_clock_strategy.
00: differential mode;
01: loop back mode;
10:reference Node time mode;
11: adaptive mode.

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 2
DEFVALUE: 2
UNITS: NA…
Enumerationr/w
Enumerated Values:
0differentialMode
1loopbackMode
2referenceNodeTimeMode
3addaptiveMode
 .1.3.6.1.4.1.637.61.1.56.13.1.16
dsx1PWTDMFPGAVersion mandatory
FPGA software version.

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.56.13.1.17
dsx1PWTDMRowStatus mandatory
This object is used to create a new row or delete an
existing row in this table. The possible valid values are:
(1) active
(4) createdAndGo
(6) destroy
To create an entry in this table, this object should be set t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.637.61.1.56.13.1.18
dsx1PWTDMConfState mandatory
PWTDM Configuration state bitmap.
bit 0: high value indicates Channel Configuration fail
bit 1: high value indicates RTP modeSourceAddress PointerConfiguration fail
bit 2: high value indicates Packet length Config…
Integer32
Constraints:
range: 0-8191
 .1.3.6.1.4.1.637.61.1.56.13.1.19

dsx1LineInterfaceUnitTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.14 · 1 row entry · 4 columns
Open in standard view 
This table contains the 2E1/DS1 SFP Line Interface Unit configuration
information.
ALCATEL NOTE:
   TABLESIZE: 4
dsx1LineInterfaceUnitEntry entry .1.3.6.1.4.1.637.61.1.56.14.1
Each entry consists of a list of 2E1/DS1 SFP Line Interface Unit parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable
Indexes
No indexes recorded
Column Syntax OID
dsx1SfpLIUConfLine mandatory
This bit selects the E1 or T1/J1 operation mode globally.
0: E1 mode is selected.
1: T1/J1 mode is selected.
Note: After bit T1/E1 is changed: Before accessing any other regisers a delay of 50us is required to
allow th…
Enumerationr/w
Enumerated Values:
0e1
1t1
 .1.3.6.1.4.1.637.61.1.56.14.1.1
dsx1SfpLIURxSensitivity mandatory
0: Receive equalizer off (short haul receiver)
1: Receive equalizer on (long haul receiver)

ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESC…
Enumerationr/w
Enumerated Values:
0shorthaul
1longhaul
 .1.3.6.1.4.1.637.61.1.56.14.1.2
dsx1SfpLIUTxConfig mandatory
These bits select the transmit template/LBO for short-haul/long-haul applications.

value T1/E1/J1 TCLK Cable Cable range/ Allowable Cable
impedance LBO loss
0001 E1 …
Integer32r/w
Constraints:
range: 1-12
 .1.3.6.1.4.1.637.61.1.56.14.1.3
dsx1SfpLIUConfState mandatory
Line Interface Unit Configuration state bitmap.
bit 0: high value indicates ConfLine Configuration fail
bit 1: high value indicates Receiver Sensitivity Configuration fail
bit 2: high value indicates Transmitter Confi…
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.637.61.1.56.14.1.4

dsx1FramerTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.15 · 1 row entry · 5 columns
Open in standard view 
This table contains the 2E1/DS1 SFP Framer configuration.
ALCATEL NOTE:
    TABLESIZE: 5
dsx1FramerEntry entry .1.3.6.1.4.1.637.61.1.56.15.1
Each entry consists of a list of 2E1/DS1 SFP Framer parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable
Indexes
No indexes recorded
Column Syntax OID
dsx1FramerGenConfig mandatory
Generai Configuration bitmap.
bit 0: Framed (1) or unframed (0) TDM traffic selection
bit 1: RAI transparent (only for E1)
RAI: Remote Alarm Indication defined in E1 where it is derived from the NFAS A bit.
bit 2: R…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.15.1.1
dsx1FramerLIU2IWFConfig mandatory
Line Interface unit to Inter working Function Configuration bitmap.
bit 0: Enable performance monitoring toward IWF
bit 1: Enable AIS toward IWF
bit 2: Enable RAI (Remote Alarm Indication) toward IWF (only for E1)
bi…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.15.1.2
dsx1FramerIWF2LIUConfig mandatory
Generai Configuration bitmap.
bit 0: Enable performance monitoring toward LIU
bit 1: Enable AIS toward LIU
bit 2: Enable RAI toward LIU (only for E1)
bit 3: Enable REI toward LIU (only for E1)
bit 4: Force RAI toward …
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.56.15.1.3
dsx1FramerAlarmStatus mandatory
Alarm Status bitmap. High value indicates an alarm has occured
Bit 0 : CRC4 (Cylic Redundancy check-4) threshold alarm from LIU (only for E1)
Bit 1 : CRC4 (Cylic Redundancy check-4) alarm from LIU (only for E1)
Bit 2 …
Integer32
Constraints:
range: 0-262143
 .1.3.6.1.4.1.637.61.1.56.15.1.4
dsx1FramerConfState mandatory
Framer Configuration state bitmap.
bit 0: high value indicates General Configuration fail
bit 1: high value indicates LIU2IWF Configuration fail
bit 2: high value indicates IWF2LIU Configuration fail

A…
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.637.61.1.56.15.1.5

dsx1PWTDMProtocolEngineTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.16 · 1 row entry · 11 columns
Open in standard view 
This table contains the 2E1/DS1 SFP protocol engine configuration
information.
ALCATEL NOTE:
   TABLESIZE: 11
   DESCR: This Table is not supported, handled internally in the sfp hardware.
dsx1PWTDMProtocolEngineEntry entry .1.3.6.1.4.1.637.61.1.56.16.1
Each entry consists of a list of 2E1/DS1 SFP protocol engine parameters.
Indexes
dsx1SfpProtLogicalSlot dsx1SfpProtFaceplateNumber
Column Syntax OID
dsx1SfpProtLogicalSlot mandatory
This is the first index of the dsx1sfpLogicalSlot.

Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
I…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.16.1.1
dsx1SfpProtFaceplateNumber mandatory
This is the second index of the dsx1PWTDMProtocolEngineTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.16.1.2
dsx1PWTDMProtocolEngineDA1 mandatory
MAC Destination Address 1 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INS…
.1.3.6.1.4.1.637.61.1.56.16.1.3
dsx1PWTDMProtocolEngineDA2 mandatory
MAC Destination Address 2 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INS…
.1.3.6.1.4.1.637.61.1.56.16.1.4
dsx1PWTDMProtocolEngineDA3 mandatory
MAC Destination Address 3 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INS…
.1.3.6.1.4.1.637.61.1.56.16.1.5
dsx1PWTDMProtocolEngineDA4 mandatory
MAC Destination Address 4 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INS…
.1.3.6.1.4.1.637.61.1.56.16.1.6
dsx1PWTDMProtocolEngineSA1 mandatory
MAC Source Address 1 in SA pool (TDM2Eth, config SA on per PW basis)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE…
.1.3.6.1.4.1.637.61.1.56.16.1.7
dsx1PWTDMProtocolEngineSA2 mandatory
MAC Source Address 2 in SA pool (TDM2Eth, config SA on per PW basis)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE…
.1.3.6.1.4.1.637.61.1.56.16.1.8
dsx1PWTDMProtocolEngineSA3 mandatory
MAC Source Address 3 in SA pool (TDM2Eth, config SA on per PW basis)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE…
.1.3.6.1.4.1.637.61.1.56.16.1.9
dsx1PWTDMProtocolEngineSA4 mandatory
MAC Source Address 4 in SA pool (TDM2Eth, config SA on per PW basis)

ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE…
.1.3.6.1.4.1.637.61.1.56.16.1.10
dsx1RTPPayloadtype mandatory
RTP payload type mode.
00 - PayloadType=all 0s, SSID=all 1s
01 - PayloadType=all 1s, SSID=all 1s
10 - PayloadType= ecid(18 downto 12), SSID=ecid
11 - PayloadType= vlan_id(6 downto 0), SSID= x0000 & vlan_id
…
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.637.61.1.56.16.1.11

ltHostSfpConfigExtTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.17 · 1 row entry · 5 columns
Open in standard view 
This table contains the host shelf LT SFP configuration information
regarding link assignement to LT on FD-REM
ALCATEL NOTE:
   TABLESIZE: 288 (Full FX-8 with FELT-B --> 8 * 36)
ltHostSfpConfigExtEntry entry .1.3.6.1.4.1.637.61.1.56.17.1
Each entry consists of a list of host shelf LT SFP configuration ltHostSfpConfigExtTable.
Indexes
ltHostConfigSfpLogSlotId ltHostConfigExtSfpFaceplateNumber
Column Syntax OID
ltHostConfigExtSfpFaceplateNumber mandatory
This is the SFP number on the LT identified by ltHostConfigExtSfpLogSlotId.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..24
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.17.1.1
ltHostSfpCableToRack mandatory
This is the Rack ID of the expansion shelf LSM which the SFP
is planned to cable to. Value 0 means that no rack is specified.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: 0..7
…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.17.1.2
ltHostSfpCableToShelf mandatory
This is the Shelf ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to.
Value 0 means that no shelf is specified.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RA…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.17.1.3
ltHostSfpCableToSlot mandatory
This is the Slot ID of the expansion shelf LSM which
the SFP is planned to cable to.
Value 0 means that no slot is specified.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: DEP…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.17.1.4
ltHostConfigSfpLogSlotId mandatory
The logical slot id of the board where the remote LT is plugged in
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: DEP / depends on the shelf type.
DEFVALUE: 0
UNITS: NA…
ASAM-EQUIP-MIBEqptSlotIndex
Textual Convention: ASAM-EQUIP-MIBEqptSlotIndex Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.56.17.1.5

ltHostSfpStatusTable

table mandatory
.1.3.6.1.4.1.637.61.1.56.18 · 1 row entry · 10 columns
Open in standard view 
This table contains the host shelf SFP or XFP status information.
ALCATEL NOTE:
    TABLESIZE: 26
ltHostSfpStatusEntry entry .1.3.6.1.4.1.637.61.1.56.18.1
Each entry consists of a list of SFP or XFP status parameters.
Indexes
ltHostStatusSfpLogSlotId ltHostStatusSfpFaceplateNumber
Column Syntax OID
ltHostStatusSfpFaceplateNumber mandatory
This is the host shelf SFP or XFP cage number.
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example, if the XFP cage has…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.18.1.1
ltLanxPortNumber mandatory
This is the Physical LANX or IHUB port to which the SFP or XFP is
connected to. For an SHUB system, the lanxPortNumber here corresponds
to lanxInterfaceIndex in the LANX MIB. For an IHUB system, the
lanxPortNumber to…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.18.1.2
ltHostSfpDownlinkStatus mandatory
This is the host shelf SFP or XFP status.
ok (1): The SFP or XFP is operational.
sfpNotPresent (2): The SFP or XFP cage is empty.
los (3): The SFP or XFP has detected Loss…
Enumeration
Enumerated Values:
1ok
2sfpNotPresent
3los
4txFail
5invalidAlcatelId
6unknown
7sfpControlFail
8notApplicable
9txFailAndLos
10sfpPlanDetectMismatch
 .1.3.6.1.4.1.637.61.1.56.18.1.3
ltHostSfpCabledToRack mandatory
This is the Rack ID of the expansion shelf LSM to which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRV…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.18.1.4
ltHostSfpCabledToShelf mandatory
This is the Shelf ID of the expansion shelf LSM which the host shelf
SFP is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVM…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.18.1.5
ltHostSfpCabledToSlot mandatory
This is the Slot ID of the expansion shelf LSM which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMO…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.18.1.6
ltHostSfpType mandatory
This variable indicates the type of the SFP or XFP, as read from the
device.
It is a bitmap represented as a sum, therefore, it can represent
multiple types (combination of types) simultaneously.
The SFP type bits (0..…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.56.18.1.7
ltHostSfpCablingMismatch mandatory
This is the host shelf SFP cabling mismatch status:
noMismatch(1): no cabling mismatch is detected.
unexpectedRemoteLt(2): a remote LT is detected at an unassigned
downlink SFP po…
Enumeration
Enumerated Values:
1noMismatch
2unexpectedRemoteLt
3assignmentMismatch
4incompatibleShelf
 .1.3.6.1.4.1.637.61.1.56.18.1.8
ltHostSfpCabledToPhysAddress mandatory
The physical (MAC) address of the remote interface that is
cabled to this host shelf SFP.
If the remote interface does not have such an address or
the address is not yet discovered, this object would
contain an octet st…
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.637.61.1.56.18.1.9
ltHostStatusSfpLogSlotId mandatory
The logical slot id of the board where the remote LT is plugged in
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO…
ASAM-EQUIP-MIBEqptSlotIndex
Textual Convention: ASAM-EQUIP-MIBEqptSlotIndex Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.56.18.1.10