dsx1SfpProtFaceplateNumber
ASAM-SFP-MIB ·
.1.3.6.1.4.1.637.61.1.56.16.1.2
Object
column
mandatory
Integer32
This is the second index of the dsx1PWTDMProtocolEngineTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example 257.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 0..511
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Context
- MIB
- ASAM-SFP-MIB
- OID
.1.3.6.1.4.1.637.61.1.56.16.1.2- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- dsx1PWTDMProtocolEngineEntry
- Table
- dsx1PWTDMProtocolEngineTable
- Siblings
- 10
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx1SfpProtLogicalSlot mandatory This is the first index of the dsx1sfpLogicalSlot.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the … | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.16.1.1 |
| dsx1PWTDMProtocolEngineSA4 mandatory MAC Source Address 4 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.10 |
| dsx1RTPPayloadtype mandatory RTP payload type mode.
00 - PayloadType=all 0s, SSID=all 1s
01 - PayloadType=all 1s, SSID=all 1s
10 - PayloadType= ecid(18 downto 12), SSID=ecid
11 - PayloadType= vlan_id(6 downto… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.16.1.11 |
| dsx1PWTDMProtocolEngineDA1 mandatory MAC Destination Address 1 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.3 |
| dsx1PWTDMProtocolEngineDA2 mandatory MAC Destination Address 2 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.4 |
| dsx1PWTDMProtocolEngineDA3 mandatory MAC Destination Address 3 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.5 |
| dsx1PWTDMProtocolEngineDA4 mandatory MAC Destination Address 4 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.6 |
| dsx1PWTDMProtocolEngineSA1 mandatory MAC Source Address 1 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.7 |
| dsx1PWTDMProtocolEngineSA2 mandatory MAC Source Address 2 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.8 |
| dsx1PWTDMProtocolEngineSA3 mandatory MAC Source Address 3 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
… | column | - | .1.3.6.1.4.1.637.61.1.56.16.1.9 |