dsx1SfpGenConfigSGMIILocalLoopBack
ASAM-SFP-MIB ·
.1.3.6.1.4.1.637.61.1.56.11.1.7
Object
column
mandatory
r/w
Enumeration
disable (0): SGMII local loopback disable towards CESoP.
enable (1): SGMII local loopback enable towards CESoP.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: Not Supported
Context
- MIB
- ASAM-SFP-MIB
- OID
.1.3.6.1.4.1.637.61.1.56.11.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- dsx1GeneralConfigEntry
- Table
- dsx1GeneralConfigTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx1SfpReadyStatus mandatory This is the host SFP status.
ready (0):
notready (1):
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: No
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNI… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.1 |
| dsx1SfpGenConfigLIUHighImpedence mandatory low (0):
high (1): A high level value places all transmitter drivers of the LIU in high Impedence state.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST:… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.10 |
| dsx1SfpGenConfigState mandatory General Configuration state bitmap.
bit 0: high value indicates Market Configuration fail
bit 1: high value indicates Tributory1 Configuration fail
bit 2: high value indicates… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.11.1.11 |
| dsx1SfpGenConfigMarket mandatory ETSI (0): used for ETSI Market for E1 Lines.
ANSI (1): used for ANSI Market for T1/DS1 Lines.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
IN… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.2 |
| dsx1SfpGenConfigTributary1 mandatory Enable/Disable Tributary1.
disable (0): disable Tributary 1.
enable (1): enable Tributary 1.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
IN… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.3 |
| dsx1SfpGenConfigTributary2 mandatory Enable/Disable Tributary2.
disable (0): Disable Tributary 2.
enable (1): enable Tributary 0.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
IN… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.4 |
| dsx1SfpGenConfigSERDES mandatory disable (0): Disable SERDES device.
enable (1): enable SERDES device.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEF… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.5 |
| dsx1SfpGenConfigSERDESLoopBack mandatory Enable of SERDES device. When held low, the SERDES
device enters in an ultralow-power idle state and
the transmitter output pins are set to high impedance
state
.
disable (0… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.6 |
| dsx1SfpGenConfigSGMIIRemoteLoopBack mandatory disable (0): SGMII remote loopback disable towards serdes.
enable (1): SGMII remote loopback enable towards serdes.
ALCATEL NOTE:
ACCESS: RW
US… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.8 |
| dsx1SfpGenConfigLIUReset mandatory reset (0): A low level value (for more than 100ns) forces the LIU to reset state.
This is the value that can be set by the manager. This value will trigger a LIU reset.
… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.11.1.9 |