hostSfpType

ASAM-SFP-MIB · .1.3.6.1.4.1.637.61.1.56.3.1.7

Object

column mandatory Integer32

This variable indicates the type of the SFP or XFP, as read from the 
device.
It is a bitmap represented as a sum, therefore, it can represent
multiple types (combination of types) simultaneously.
The SFP type bits (0..7)  are as defined in standard SFF-8472.
The XFP type bits (8..15) are as defined in standard INF-8077_v4.5.
The SFP octet and the XFP octet are mutually exclusive (i.e. at least 
one of the two octets is always zero).
The various bit positions are:
     bit  0 (1):     1000BASE-SX
     bit  1 (2):     1000BASE-LX
     bit  2 (4):     1000BASE-CX
     bit  3 (8):     1000BASE-T
     bit  4 (16):    100BASE-LX/LX10
     bit  5 (32):    100BASE-FX
     bit  6 (64):    BASE-BX10
     bit  7 (128):   BASE-PX
     bit  8 (256):   reserved for a future XFP type, INF-8077
     bit  9 (512):   10GBASE-EW
     bit 10 (1024):  10GBASE-LW
     bit 11 (2048):  10GBASE-SW
     bit 12 (4096):  10GBASE-LRM
     bit 13 (8192):  10GBASE-ER
     bit 14 (16384): 10GBASE-LR
     bit 15 (32768): 10GBASE-SR
     bit 16 (65536):  2500BASE-SX
     bit 17 (131072): 2500BASE-LX
     bit 18 (262144): 2500BASE-BX
If the hostSfpType is unknown or not specified, hostSfpType = 0.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
    ACCESS: RO
    USAGE: NA
    PERSIST: NO 
    INSRVMOD: NA
    RANGE: 0..65535
    DEFVALUE: 0 / hostSfpType unknown 
    UNITS: NA 
    SPARSE: NO
    DESCR: NA

Context

MIB: ASAM-SFP-MIB
OID: .1.3.6.1.4.1.637.61.1.56.3.1.7
Type: column
Access: readonly
Status: mandatory
Parent: hostSfpStatusEntry
Table: hostSfpStatusTable
Siblings: 8

Syntax

Integer32

Source: COPS-PR-SPPIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hostStatusSfpFaceplateNumber mandatory This is the host shelf SFP or XFP cage number. For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1). For an XFP cage, it is 256 + (the faceplate number of the XFP …	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.3.1.1`
lanxPortNumber mandatory This is the Physical LANX or IHUB port to which the SFP or XFP is connected to. For an SHUB system, the lanxPortNumber here corresponds to lanxInterfaceIndex in the LANX MIB. Fo…	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.3.1.2`
hostSfpDownlinkStatus mandatory This is the host shelf SFP or XFP status. ok (1): The SFP or XFP is operational. sfpNotPresent (2): The SFP or XFP cage is empty. los (3): …	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.3.1.3`
hostSfpCabledToRack mandatory This is the Rack ID of the expansion shelf LSM to which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING This table is now…	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.3.1.4`
hostSfpCabledToShelf mandatory This is the Shelf ID of the expansion shelf LSM which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING This table is now …	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.3.1.5`
hostSfpCabledToSlot mandatory This is the Slot ID of the expansion shelf LSM which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING This table is now d…	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.3.1.6`
hostSfpCablingMismatch mandatory This is the host shelf SFP cabling mismatch status: noMismatch(1): no cabling mismatch is detected. unexpectedRemoteLt(2): a remote LT is detected at an unassigned …	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.3.1.8`
hostSfpCabledToPhysAddress mandatory The physical (MAC) address of the remote interface that is cabled to this host shelf SFP. If the remote interface does not have such an address or the address is not yet discovere…	column	RFC1213-MIBPhysAddress	`.1.3.6.1.4.1.637.61.1.56.3.1.9`