dsx1ClockConfigEntry
ASAM-SFP-MIB ·
.1.3.6.1.4.1.637.61.1.56.10.1
Object
row
mandatory
Each entry consists of a list of 2E1/DS1 SFP general configuration parameters.
Context
- MIB
- ASAM-SFP-MIB
- OID
.1.3.6.1.4.1.637.61.1.56.10.1- Type
- row
- Status
- mandatory
- Parent
- dsx1ClockConfigTable
- Table
- dsx1ClockConfigTable
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx1SfpClkConfigLogicalSlot mandatory This is the first index of the dsx1ClockConfig Table.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has t… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.1 |
| dsx1SfpClkConfState mandatory Clock Configuration state bitmap.
bit 0: high value indicates SyncSource Configuration fail
bit 1: high value indicates DegradeAlarm Configuration fail
bit 2: high value indic… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.10 |
| dsx1SfpClkConfigFaceplateNumber mandatory This is the second index of the dsx1ClockConfigTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFacepla… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.2 |
| dsx1SfpClkConfigSyncSource mandatory Select as sync source between clock recovered from Serdes or Tributary clock.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RAN… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.3 |
| dsx1SfpClkConfigDegradeAlarm mandatory Enable degrade alarm on los pin.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPAR… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.4 |
| dsx1SfpClkConfigSoftwareReset mandatory noSoftwareReset (default value), this is the value that is returned when read the attribute.
softwareReset, this is the value that can be set by the manager. This value will trig… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.5 |
| dsx1SfpClkAlarmState mandatory serdesFailAlarm (1):Failure of the SERDES clock alarm (active high)
tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high)
tribu… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.6 |
| dsx1SfpClkConfigClkControlSignal mandatory SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal
(PWM) between DPLL output and a ~4MHZ square wave signal
generated dividing the same system clock.
0 Square wa… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.7 |
| dsx1SfpClkConfigClkSource mandatory CLK_SOURCE_SEL. This bit is used to select between local VTCXO and
CLOCK FROM SERDES as synchronization source for the signals:
CK_EN-25M and CK-EN-ETSI-ANSI
1 CK-125M-REC
0 CK… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.8 |
| dsx1SfpClkRowStatus mandatory This object is used to create a new row or delete an
existing row in this table. The possible valid values are:
(1) active
(4) createdAndGo
(6) destroy
To create an entry in… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.637.61.1.56.10.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx1SfpClkConfigLogicalSlot mandatory This is the first index of the dsx1ClockConfig Table.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has t… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.1 |
| dsx1SfpClkConfigFaceplateNumber mandatory This is the second index of the dsx1ClockConfigTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFacepla… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.2 |