dsx1SfpClkRowStatus
ASAM-SFP-MIB ·
.1.3.6.1.4.1.637.61.1.56.10.1.9
Object
This object is used to create a new row or delete an existing row in this table. The possible valid values are: (1) active (4) createdAndGo (6) destroy To create an entry in this table, this object should be set to CreateAndGo. To delete an entry from this table, RowStatus should be set to Destroy value by the SNMP manager. ALCATEL NOTE: ACCESS: NA USAGE: MAND PERSIST: NO INSRVMOD:NA RANGE:1 | 4 | 6 -- active (1), createAndGo (4), destroy (6) DEFVALUE: NA UNITS: NA SPARSE: NA
Context
- MIB
- ASAM-SFP-MIB
- OID
.1.3.6.1.4.1.637.61.1.56.10.1.9- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- dsx1ClockConfigEntry
- Table
- dsx1ClockConfigTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx1SfpClkConfigLogicalSlot mandatory This is the first index of the dsx1ClockConfig Table.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has t… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.1 |
| dsx1SfpClkConfState mandatory Clock Configuration state bitmap.
bit 0: high value indicates SyncSource Configuration fail
bit 1: high value indicates DegradeAlarm Configuration fail
bit 2: high value indic… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.10 |
| dsx1SfpClkConfigFaceplateNumber mandatory This is the second index of the dsx1ClockConfigTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFacepla… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.2 |
| dsx1SfpClkConfigSyncSource mandatory Select as sync source between clock recovered from Serdes or Tributary clock.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RAN… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.3 |
| dsx1SfpClkConfigDegradeAlarm mandatory Enable degrade alarm on los pin.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPAR… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.4 |
| dsx1SfpClkConfigSoftwareReset mandatory noSoftwareReset (default value), this is the value that is returned when read the attribute.
softwareReset, this is the value that can be set by the manager. This value will trig… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.5 |
| dsx1SfpClkAlarmState mandatory serdesFailAlarm (1):Failure of the SERDES clock alarm (active high)
tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high)
tribu… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.10.1.6 |
| dsx1SfpClkConfigClkControlSignal mandatory SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal
(PWM) between DPLL output and a ~4MHZ square wave signal
generated dividing the same system clock.
0 Square wa… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.7 |
| dsx1SfpClkConfigClkSource mandatory CLK_SOURCE_SEL. This bit is used to select between local VTCXO and
CLOCK FROM SERDES as synchronization source for the signals:
CK_EN-25M and CK-EN-ETSI-ANSI
1 CK-125M-REC
0 CK… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.10.1.8 |