dsx1SfpClkConfigFaceplateNumber

Object

column mandatory Integer32

This is the second index of the dsx1ClockConfigTable. 
It is the number of the SFP cage, as shown on the card 
faceplate.  If the faceplate cage number is zero, 
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage).  For
example 257.
              
ALCATEL NOTE:
   ACCESS: RO
   USAGE: NA
   PERSIST: NO 
   INSRVMOD: NO
   RANGE: 0..511
   DEFVALUE: NA
   UNITS: NA 
   SPARSE: NO
   DESCR: NA

Context

MIB: ASAM-SFP-MIB
OID: .1.3.6.1.4.1.637.61.1.56.10.1.2
Type: column
Access: readonly
Status: mandatory
Parent: dsx1ClockConfigEntry
Table: dsx1ClockConfigTable
Siblings: 9

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dsx1SfpClkConfigLogicalSlot mandatory This is the first index of the dsx1ClockConfig Table. Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has t…	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.10.1.1`
dsx1SfpClkConfState mandatory Clock Configuration state bitmap. bit 0: high value indicates SyncSource Configuration fail bit 1: high value indicates DegradeAlarm Configuration fail bit 2: high value indic…	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.10.1.10`
dsx1SfpClkConfigSyncSource mandatory Select as sync source between clock recovered from Serdes or Tributary clock. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RAN…	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.10.1.3`
dsx1SfpClkConfigDegradeAlarm mandatory Enable degrade alarm on los pin. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1 DEFVALUE: 1 UNITS: NA SPAR…	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.10.1.4`
dsx1SfpClkConfigSoftwareReset mandatory noSoftwareReset (default value), this is the value that is returned when read the attribute. softwareReset, this is the value that can be set by the manager. This value will trig…	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.10.1.5`
dsx1SfpClkAlarmState mandatory serdesFailAlarm (1):Failure of the SERDES clock alarm (active high) tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high) tribu…	column	Integer32	`.1.3.6.1.4.1.637.61.1.56.10.1.6`
dsx1SfpClkConfigClkControlSignal mandatory SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal (PWM) between DPLL output and a ~4MHZ square wave signal generated dividing the same system clock. 0 Square wa…	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.10.1.7`
dsx1SfpClkConfigClkSource mandatory CLK_SOURCE_SEL. This bit is used to select between local VTCXO and CLOCK FROM SERDES as synchronization source for the signals: CK_EN-25M and CK-EN-ETSI-ANSI 1 CK-125M-REC 0 CK…	column	Enumeration	`.1.3.6.1.4.1.637.61.1.56.10.1.8`
dsx1SfpClkRowStatus mandatory This object is used to create a new row or delete an existing row in this table. The possible valid values are: (1) active (4) createdAndGo (6) destroy To create an entry in…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.637.61.1.56.10.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects