dsx1PWTDMPacketLength
ASAM-SFP-MIB ·
.1.3.6.1.4.1.637.61.1.56.13.1.6
Object
column
mandatory
r/w
Integer32
Config packet length bits (13:0)
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...16382
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
Context
- MIB
- ASAM-SFP-MIB
- OID
.1.3.6.1.4.1.637.61.1.56.13.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- dsx1PWTDMConfigEntry
- Table
- dsx1PWTDMConfigTable
- Siblings
- 18
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx1SfpPWTDMLogicalSlot mandatory This is the first index of the dsx1PWTDMConfig Table.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has t… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.1 |
| dsx1PWTDMPriority mandatory 802.1p 3 bits field.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.10 |
| dsx1PWTDMVlanId mandatory Vlan ID.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...4095
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.11 |
| dsx1PWTDMECIDEthToTDM mandatory ECID (Emulated Circuit Identifer) 20 bit field Eth2Tdm.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..1048575
DEF… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.12 |
| dsx1PWTDMECIDTDMToEth mandatory ECID (Emulated Circuit Identifer) 20 bit field Tdm2Eth.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..1048575
DE… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.13 |
| dsx1PWTDJitterBufferSize mandatory Jitter Buffer Queue size. Actual size + configurable size + 1. Example configuring size of 7 mean buffer size of 8 packets
ALCATEL NOTE:
ACCESS: RW
USAGE: … | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.14 |
| dsx1PWTDMConsequenceNumber mandatory New Sequence number
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.15 |
| dsx1PWTDMClock mandatory TDM_clock_strategy.
00: differential mode;
01: loop back mode;
10:reference Node time mode;
11: adaptive mode.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INS… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.13.1.16 |
| dsx1PWTDMFPGAVersion mandatory FPGA software version.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.13.1.17 |
| dsx1PWTDMRowStatus mandatory This object is used to create a new row or delete an
existing row in this table. The possible valid values are:
(1) active
(4) createdAndGo
(6) destroy
To create an entry in… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.637.61.1.56.13.1.18 |
| dsx1PWTDMConfState mandatory PWTDM Configuration state bitmap.
bit 0: high value indicates Channel Configuration fail
bit 1: high value indicates RTP modeSourceAddress PointerConfiguration fail
bit 2: h… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.19 |
| dsx1SfpPWTDMFaceplateNumber mandatory This is the second index of the dsx1PWTDMConfig Table.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFacepl… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.2 |
| dsx1PWTDMTributaryIndex mandatory This is the third index of the dsx1PWTDMConfigTable.
Normally, this object used to select the tributary selecton (1 or 2 or 3) of the 2xE1/DS1 FPGA
where valu… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.3 |
| dsx1PWTDMChannel mandatory Chan_ena
0: close this channel;
1: open this channel
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SPAR… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.13.1.4 |
| dsx1PWTDMRtpMode mandatory Rtp_present
0: rtp is not present, configure to ACR mode;
1: rtp is present, configure DCR mode
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.13.1.5 |
| dsx1PWTDMSourceAddressPointer mandatory SA select 2 bits field (TDM2Eth)
00 - Select Source Address 0
01 - Select Source Address 1
10 - Select Source Address 2
11 - Select Source Address 3
ALCATEL NOTE:
… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.13.1.7 |
| dsx1PWTDMSourceAddress mandatory MAC SA for each tributary
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: N… | column | - | .1.3.6.1.4.1.637.61.1.56.13.1.8 |
| dsx1PWTDMDestinationMac mandatory MAC DA for each tributary
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: N… | column | - | .1.3.6.1.4.1.637.61.1.56.13.1.9 |