sfpDiagRSSITxPowerAlmLow
ASAM-SFP-MIB ·
.1.3.6.1.4.1.637.61.1.56.5.1.22
Object
this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,alarm OLTTXPWLO will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
For ONT Profile, -63.5dBm means using ONT internal policy.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA
Context
- MIB
- ASAM-SFP-MIB
- OID
.1.3.6.1.4.1.637.61.1.56.5.1.22- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- sfpDiagEntry
- Table
- sfpDiagTable
- Siblings
- 52
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfpDiagLogicalSlot mandatory This is the first index of the sfpDiagTable.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP ca… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.5.1.1 |
| sfpDiagTemperature mandatory A column in the sfpDiagTable, containing the freshly-measured
temperature of the specified SFP, encoded into a string.
Two types of values are supported. In the f… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.10 |
| sfpDiagTCAStatusTemperature mandatory A column in the sfpDiagTable, containing the freshly-measured temperature
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL NOTE… | column | SfpDiagTCAStatus | .1.3.6.1.4.1.637.61.1.56.5.1.11 |
| sfpDiagTCAStatusVoltage mandatory A column in the sfpDiagTable, containing the freshly-measured voltage
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
For XFP, this parameter will dis… | column | SfpDiagTCAStatus | .1.3.6.1.4.1.637.61.1.56.5.1.12 |
| sfpDiagTCAStatusBiasCurrent mandatory A column in the sfpDiagTable, containing the freshly-measured bias current
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL NOT… | column | SfpDiagTCAStatus | .1.3.6.1.4.1.637.61.1.56.5.1.13 |
| sfpDiagTCAStatusTxPower mandatory A column in the sfpDiagTable, containing the freshly-measured received
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL N… | column | SfpDiagTCAStatus | .1.3.6.1.4.1.637.61.1.56.5.1.14 |
| sfpDiagTCAStatusRxPower mandatory A column in the sfpDiagTable, containing the freshly-measured transmit
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL N… | column | SfpDiagTCAStatus | .1.3.6.1.4.1.637.61.1.56.5.1.15 |
| sfpDiagRSSIProfileId mandatory Indicates the RSSI TCA profile, refer to SfpRSSIProfileTable.
65535 means auto mode. When configured 65535, when sfp is plugged in, system will detect sfp type and associate relat… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.5.1.16 |
| sfpDiagRSSIState mandatory Enable(1) and Disable(2) to RSSI function on port level.
ALCATEL NOTE:
ACCESS: NA usage: OPT
persistent: YES INSRVMOD:YES
RANGE:1,2 DE… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.5.1.17 |
| sfpDiagRSSIRxPowerAlmLow mandatory this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value,then alarm OLTRXPWLO will be reported.
For CFP4, there is no module level 'RxPower' mo… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.18 |
| sfpDiagRSSIRxPowerAlmHigh mandatory this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
For CFP4, there is no module level 'RxPower' moni… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.19 |
| sfpDiagSfpFaceplateNumber mandatory This is the second index of the sfpDiagTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber… | column | Integer32 | .1.3.6.1.4.1.637.61.1.56.5.1.2 |
| sfpDiagRSSIRxPowerWarnLow mandatory this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
For CFP4, there is no module level 'RxPower' mo… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.20 |
| sfpDiagRSSIRxPowerWarnHigh mandatory this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
For CFP4, there is no module level 'RxPower' m… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.21 |
| sfpDiagRSSITxPowerAlmHigh mandatory this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,alarm OLTTXPWHI will be reported.
For CFP4, there is no module level 'TxPower' monitor,t… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.23 |
| sfpDiagRSSITxPowerWarnLow mandatory this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,alarm OLTTXPWLOWARN will be reported.
For CFP4, there is no module level 'TxPower' mon… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.24 |
| sfpDiagRSSITxPowerWarnHigh mandatory this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,alarm OLTTXPWHIWARN will be reported.
For CFP4, there is no module level 'TxPower' m… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.25 |
| sfpDiagRSSITemperatureAlmLow mandatory this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then alarm OLTTEMPLO will be reported.
For CFP4,this is the module level threshold.The… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.26 |
| sfpDiagRSSITemperatureAlmHigh mandatory this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,alarm OLTTEMPHI will be reported.
For CFP4,this is the module level threshold.The net… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.27 |
| sfpDiagRSSITemperatureWarnLow mandatory this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then alarm OLTTEMPLOWARN will be reported.
For CFP4,this is the module level thres… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.28 |
| sfpDiagRSSITemperatureWarnHigh mandatory this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,alarm OLTTEMPHIWARN will be reported.
For CFP4,this is the module level threshold… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.29 |
| sfpDiagAvailable mandatory A column in the sfpDiagTable, with the following code points.
noError - valid values for all objects in this row (e.g.
sfpDiagRxPower) were obtained from the SFP… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.5.1.3 |
| sfpDiagRSSIBiasAlmLow mandatory this object indicates the threshold for OLTBIASLO. when bias is less than this value, then alarm OLTBIASLO will be reported.
For CFP4,this is the module level threshold.The networ… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.30 |
| sfpDiagRSSIBiasAlmHigh mandatory this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then alarm OLTBIASHI will be reported.
For CFP4,this is the module level threshold.The netw… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.31 |
| sfpDiagRSSIBiasWarnLow mandatory this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then alarm OLTBIASLOWARN will be reported.
For CFP4,this is the module level threshold.Th… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.32 |
| sfpDiagRSSIBiasWarnHigh mandatory this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then alarm OLTBIASHIWARN will be reported.
For CFP4,this is the module level threshold.… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.33 |
| sfpDiagRSSIVoltageAlmLow mandatory this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then alarm OLTVOLLO will be reported.
'Not Available' is shown when the measurement could n… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.34 |
| sfpDiagRSSIVoltageAlmHigh mandatory this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then alarm OLTVOLHI will be reported.
'Not Available' is shown when the measurement could… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.35 |
| sfpDiagRSSIVoltageWarnLow mandatory this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then alarm OLTVOLLOWARN will be reported.
'Not Available' is shown when the measurement… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.36 |
| sfpDiagRSSIVoltageWarnHigh mandatory this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then alarm OLTVOLHIWARN will be reported.
'Not Available' is shown when the measureme… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.37 |
| sfpDiagRSSIExtRxPowerAlmLow mandatory this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'N… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.38 |
| sfpDiagRSSIExtRxPowerAlmHigh mandatory this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not A… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.39 |
| sfpDiagLOS mandatory A column in the sfpDiagTable, with the following code
points.
los - the SFP in the specified SFP cage has detected Loss of
Signal (on its receiver).
noLos - the… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.5.1.4 |
| sfpDiagRSSIExtRxPowerWarnLow mandatory this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.40 |
| sfpDiagRSSIExtRxPowerWarnHigh mandatory this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'No… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.41 |
| sfpDiagRSSIExtTxPowerAlmLow mandatory this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,alarm EXTOLTTXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Ap… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.42 |
| sfpDiagRSSIExtTxPowerAlmHigh mandatory this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,alarm EXTOLTTXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.43 |
| sfpDiagRSSIExtTxPowerWarnLow mandatory this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,alarm EXTOLTTXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.44 |
| sfpDiagRSSIExtTxPowerWarnHigh mandatory this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,alarm EXTOLTTXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.45 |
| sfpDiagRSSIExtBiasAlmLow mandatory For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then alarm EXTOLTBIASLO will be reported.
For CFP4, this object indicate… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.46 |
| sfpDiagRSSIExtBiasAlmHigh mandatory For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then alarm EXTOLTBIASHI will be reported.
For CFP4, this object indica… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.47 |
| sfpDiagRSSIExtBiasWarnLow mandatory For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value,then alarm EXTOLTBIASLOWARN will be reported.
For CFP4, this object i… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.48 |
| sfpDiagRSSIExtBiasWarnHigh mandatory For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value,then alarm EXTOLTBIASHIWARN will be reported.
For CFP4, this object… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.49 |
| sfpDiagTxFault mandatory A column in the sfpDiagTable, with the following code
points.
txFault - the SFP in the specified SFP cage has detected a
TxFault error (as defined in SFF-8472).… | column | Enumeration | .1.3.6.1.4.1.637.61.1.56.5.1.5 |
| sfpDiagRSSIExtTemperatureAlmLow mandatory This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLT… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.50 |
| sfpDiagRSSIExtTemperatureAlmHigh mandatory This object indicates the laser temperature high alarm threshold of network lanefor CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm O… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.51 |
| sfpDiagRSSIExtTemperatureWarnLow mandatory This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm O… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.52 |
| sfpDiagRSSIExtTemperatureWarnHigh mandatory This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alar… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.53 |
| sfpDiagTxPower mandatory A column in the sfpDiagTable, containing the freshly-measured
transmit power of the specified SFP, encoded into a string.
Five types of values are supported. In t… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.6 |
| sfpDiagRxPower mandatory A column in the sfpDiagTable, containing the freshly-measured
received power of the specified SFP, encoded into a string.
Five types of values are supported. In t… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.7 |
| sfpDiagTxBiasCurrent mandatory A column in the sfpDiagTable, containing the freshly-measured
transmit bias current of the specified SFP, encoded into a
string.
Four types of values are supporte… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.8 |
| sfpDiagSupplyVoltage mandatory A column in the sfpDiagTable, containing the freshly-measured
supply voltage of the specified SFP, encoded into a string.
Three types of values are supported. In … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.637.61.1.56.5.1.9 |