CISCO-DOT11-IF-MIB Table View

This table contains attributes to configure radio
interfaces managed by this agent.  The attributes 
are extensions to the configuration parameters in 
the dot11StationConfigTable defined in the 
IEEE802dot11-MIB.  This table configures the station
role of the interface, proprietary extensions, 
hierarchy, security option and parameters, and 
communication settings.  This table has a sparse 
dependent relationship on the ifTable.  
For each entry in this table, there exists an entry
in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table contains attributes to configure 
authentication algorithm parameters for associations 
through the SSID defined by IEEE802dot11-MIB 
dot11DesiredSSID object.  It defines attributes 
additional to those defined in the IEEE802dot11-MIB
dot11AuthenticationAlgorithmsTable.  An interface 
may support multiple authentication algorithms.  
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  This table uses the 
dot11AuthenticationAlgorithmsIndex of the
dot11AuthenticationAlgorithmsTable defined in the 
IEEE802dot11-MIB as the expansion index.  
          
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

The dot11WEPDefaultKeysTable defined by the 
IEEE802dot11-MIB allows only WEP keys of length 
up to 40 bits.  This table overrides the the
dot11WEPDefaultKeysTable and supports keys of 
from 40 to 128 bits.  A maximum of four keys can
associate with any IEEE 802.11 radio interface.  
For devices implementing this table, they should
not implement the dot11WEPDefaultKeysTable.  
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  Entries in this table 
cannot be created or deleted by the network 
management system.  All entries are created or 
deleted by the agent.

When the radio is not functioning as an access
point (i.e., cd11IfStationRole is not 'roleRoot'), 
and for example, this radio is a repeater or 
bridge, this table will contain a list of preferred 
access points with which the radio interface should 
associate with.  This table has an expansion 
dependent relationship on the ifTable.  For each 
entry in this table, there exists at least an entry
in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

When the radio is not functioning as a client 
station (i.e., cd11IfStationRole is not 
'roleClient'), and for example, this is a access 
point or independent BSS, this table will contain 
a list of SSIDs which stations must be used to 
associate with this radio.  This table has an 
expansion dependent relationship on the ifTable.  
For each entry in this table, there exists at least
an entry in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table contains attributes to configure
authentication algorithms for SSIDs listed in the 
cd11IfAuxSsidTable.  This table extends the 
IEEE802dot11-MIB dot11AuthenticationAlgorithmsTable 
for multiple SSIDs support.  Multiple SSIDs 
can associate with an interface and multiple 
authentication algorithms can apply to an auxiliary
SSID.  
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  Entries in this table cannot 
be created or deleted by the network management 
system.  All entries are created or deleted by 
the agent.

When the radio is not functioning as a client 
station (i.e., cd11IfStationRole is not 
'roleClient'), this is the list of AIDs which this
agent will assign to the clients associating with
it.  An AID is assigned if the corresponding MAC 
address matches that of the client.  This table has 
an expansion dependent relationship on the ifTable.
For each entry in this table, there exists at least
an entry in the ifTable of ifType ieee80211(71).
          
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table contains shared WEP keys for all IEEE
802.11 packets transmitted and received frames over
a VLAN identified by the cwvlWlanVlanId if both VLAN
and encryption are enabled (i.e., the 
cwvlWlanEncryptionMode is wep(2) or aes(3)) on the
radio interface.
          
If WEP encryption is enabled for the transmitted 
IEEE 802.11 frames, then the Default Shared WEP 
key in the set is used to encrypt the transmitted 
broadcast and multicast frames associated with
the cwvlWlanVlanId.  Key '1' in the set is the 
default key.  If an individual session key is not 
defined for the target station address, then the 
Default Shared WEP key will also be used to encrypt 
or decrypt unicast frames associated with the
cwvlWlanVlanId.

This table contains encryption method and key
rotation configurations for all VLANs on all 
IEEE 802.11 radio interfaces.  This table has an
expansion dependent relationship on the ifTable.  
For each entry in this table, there exists at least
an entry in the ifTable of ifType ieee80211(71).
          
VLANs are identified by the cd11IfVlanSecurityVlanId,
and the actual VLAN does not have to exist or be 
enabled for the encryption configuration to exist.

This table is for monitoring of remote active 
IEEE 802.11 radio devices on the network.
Each table entry shows an active radio being
monitored by a hot standby radio on this 
monitoring unit. 
          
This table has a sparse dependent relationship 
on the ifTable.  For each entry in this table, 
there exists an entry in the ifTable of ifType 
ieee80211(71).  Entries on this table can be 
added, deleted, and modified by the NMS.

This table represents the status of upgrade of
the radios to the newer frequencies of the 5150-5250
MHz band.
          
This table has a sparse dependent relationship on the
ifTable.  For each entry in this table, there exists 
an entry in the ifTable of ifType ieee80211(71).
          
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table contains the IEEE 802.11 Physical
Layer operation configuration parameters for
each radio interface.  This table has a sparse 
dependent relationship on the ifTable.  
For each entry in this table, there exists an 
entry in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table contains the Physical Layer
Frequency Hopping Spread Spectrum configuration 
parameters for each radio interface.  This table 
has a sparse dependent relationship on the ifTable.
For each entry in this table, there exists an 
entry in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table contains the Physical Layer
Direct Sequence Spread Spectrum configuration 
parameters for each radio interface.  This table 
has a sparse dependent relationship on the ifTable.
For each entry in this table, there exists an 
entry in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table defines the transmit and receive bit
rate of the radio on each IEEE 802.11 interface
and the WEP encryption support at those rates.  
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of
ifType ieee80211(71).  Entries in this table 
cannot be created or deleted by the network 
management system.  All entries are created or 
deleted by the agent.

This table specifies for each 802.11 channel, 
whether the scanning process controlled by the 
cd11IfPhyDsssChannelAutoEnable can select a 
particular channel for use.  This table has an 
expansion dependent relationship on the ifTable.  
For each entry in this table, there exists at least
an entry in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table shows the recommended client 
transmit power level for the radio and selects 
one of the levels as the desired transmit power
level to be used by the client of the radio.  By 
adjusting the transmit power, the radio can limit
the interference caused by adjacent clients using 
the same or adjacent channels.

This table shows the available ERP-OFDM 
transmit power levels for radios implementing 
IEEE 802.11g Protocol and configures one of the 
levels as the transmit power level.  
          
This table has a sparse dependent relationship 
on the ifTable.  For each entry in this table, 
there exists an entry in the ifTable of ifType 
ieee80211(71) and the corresponding 
cd11IfPhyMacSpecification is ieee802dot11g(3).
          
For all IEEE802.11g radios with an entry in this
table, the IEEE802dot11-MIB dot11PhyTxPowerTable 
will be used to configure ERP-CCK transmit power
levels.

This table identifies the radio frequency 
(sub)bands supported on the IEEE 802.11 radio
interfaces while operating per the regulations
imposed by the cd11IfCurrentCarrierSet. 
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  This table uses the 
cd11IfRfFrequencyBand as the expansion index.  
          
All entries in this table are created or deleted
only by the agent.

This table shows the transmit powers supported for
all the radio frequency bands on the IEEE 802.11 
radios.
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  This table uses the 
cd11IfRfFrequencyBand of cd11IfFrequencyBandTable,
cd11IfRadioModulationClass, and 
cd11IfNativeTxPowerLevel as the expansion indices.
          
All entries in this table can only be created or
deleted by the agent.

This table configures the radio power settings
for frequency bands supported on the IEEE 802.11 
radios.  This table serves as an alternative for 
the IEEE802dot11-MIB dot11PhyTxPowerTable.  This 
table allows different transmit powers to be used 
on different radio frequency bands.
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  This table uses the 
cd11IfRfFrequencyBand and cd11IfRadioModulationClass
as the expansion indices.  
          
All entries in this table are created or deleted
only by the agent.

This table specifies the receive sensitivity 
specifications of IEEE 802.11 radio interfaces.
          
This table has an expansion dependent relationship 
on the ifTable.  For each entry in this table, 
there exists at least an entry in the ifTable of 
ifType ieee80211(71).  This table uses the 
cd11IfRadioModulationClass and IEEE802dot11-MIB
dot11SupportedDataRatesRxIndex as the expansion
indices.  
          
Entries in this table cannot be created or deleted
by the network management system.  All entries are
created or deleted by the agent.

This table includes MAC layer statistics collected 
by the IEEE 802.11 radio interface.  This table has 
a sparse dependent relationship on the ifTable. 
For each entry in this table, there exists an entry
in the ifTable of ifType ieee80211(71).

This table includes rogue AP detected
information collected by the IEEE 802.11 radio
interface and 802.11 system management.  This
table has a sparse dependent relationship on
the ifTable.  For each entry in this table,
there exists an entry in the ifTable of ifType
ieee80211(71).