cd11IfPrivacyOptionMaxRate
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.1.1.1.4
Object
column
500 Kb per second Integer32
This object specifies the maximum transmit bit rate supported by the radio when using, for example, WEP encryption. The rate is expressed in standard IEEE 802.11 increments of 500Kb/sec.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.1.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Units
- 500 Kb per second
- Parent
- cd11IfStationConfigEntry
- Table
- cd11IfStationConfigTable
- Siblings
- 17
Syntax
500 Kb per second Integer32
Values & Constraints
Object Constraints
range: 2-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfStationRole This defines the role of this station itself within
the 802.11 BSS of which it is a member. The roles are:
roleWgb(1) - infrastructure type WGB
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.1 |
| cd11IfDesiredSsidMicAlgorithm This object defines the auxiliary MIC calculated
on WEP-encoded packets of stations associated with
this radio interface through IEEE802dot11-MIB
dot11DesiredSSID. The default… | column | CDot11IfMicAlgorithm | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.10 |
| cd11IfDesiredSsidWepPermuteAlg This object defines the function through which
the WEP encryption key is permuted between key
renewal periods for stations associated with this
radio interface through IEEE802d… | column | CDot11IfWepKeyPermuteAlgorithm | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.11 |
| cd11IfWorldMode This object sets the World-Mode function of the
radio to allow it to function in countries other
than it was manufactured for.
none(1) - No world mode setting,
legacy(2)… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.12 |
| cd11IfWorldModeCountry This object sets the dot11CountryString in the
IEEE802dot11-MIB identifying the country in which
the radio is operating. When cd11IfWorldMode is
either legacy(2) or dot11d(3), … | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.13 |
| cd11IfMobileStationScanParent This object enables the radio to scan for a better
parent when it is a mobile non-root device, for
example, the value of cd11IfStationRole is roleWgb(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.14 |
| cd11IfPsPacketForwardEnable If no VLAN is configured on the radio interface,
this object configures the PSPF feature. Otherwise,
cd11IfVlanPsPacketForwardEnable is used to configure
the PSPF feature per VLAN… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.15 |
| cd11IfMultipleBssidEnable If it is 'true', multiple broadcast SSID is
enabled on the radio. To a wireless client, a
MBSSID AP appears to be several distinct co-located
APs, and it transmits a beacon for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.16 |
| cd11IfMobileStationListIgnore This object indicates whether the radio should
process the AP adjacency and Enhanced Neighbor
List reports specified in the CCX Specification.
AP adjacency and Enhanced Neighbor L… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.17 |
| cd11IfMobileStationScanChannel This object specifies the channels to be used by
the infractructure clients for scanning purposes.
This object is applicable only when the radio's
role as represent… | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.18 |
| cd11IfCiscoExtensionsEnable Cisco Aironet extensions to the basic IEEE
802.11 protocols are enabled if the value is
'true'. The extension enables better BSS
performance and faster roaming. If the value
i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.2 |
| cd11IfAllowBroadcastSsidAssoc If the value of cd11IfStationRole is either
'roleRoot' or 'roleRepeater', and if
cd11IfAllowBroadcastSsidAssoc is 'true',
the device radio driver will respond
to Broadcast SSID… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.3 |
| cd11IfEthernetEncapsulDefault This object specifies the Ethernet encapsulation
transform type used within the BSS. The encapsulations
allowed are either IEEE 802.1H type or RFC-1042 type.
IEEE 802.1H design… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.5 |
| cd11IfBridgeSpacing If this device is a root wireless bridge,
this value is the distance in kilometers
reported between this device and its
farthest non-root bridge client. | column | Kilometers Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.6 |
| cd11IfDesiredSsidMaxAssocSta This object defines the maximum number of IEEE
802.11 stations which may associate with this radio
interface through IEEE802dot11-MIB dot11DesiredSSID.
If this value is '0', t… | column | Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.7 |
| cd11IfAuxiliarySsidLength This object specifies the maximum number of SSIDs
allowed for a radio interface or the number of SSID
entries per radio interface in the cd11IfAuxSsidTable.
The default value is … | column | Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.8 |
| cd11IfVoipExtensionsEnable This object enables the radio generate proprietary
elements in its beacons and probe responses to support
Voice-over-IP (VoIP) phones. The default value is
'true'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.9 |