cd11IfDomainCapabilitySet
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.2.1.1.4
Object
This object specifies the current multi-domain
capability setting of this radio. This object
takes one of the dot11MultiDomainCapabilityIndex
values on the dot11MultiDomainCapabilityTable.
The setting controls the first working radio channel
number, the number of working channels, and the
maximum transmit power level of the radio. The
setting must match the corresponding value of the
cd11IfCurrentCarrierSet set for this radio. This
object is writable only if the IEEE 802.11
multi-domain capability option is implemented
and enabled via dot11MultiDomainCapabilityImplemented
and dot11MultiDomainCapabilityEnabled.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cd11IfPhyOperationEntry
- Table
- cd11IfPhyOperationTable
- Siblings
- 7
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfCurrentCarrierSet This object defines the carrier set of the radio.
The carrier set implies a regulatory domain, but
geographic-specific restrictions within a regulatory
domain may necessitate se… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.1 |
| cd11IfModulationType This object specifies the RF modulation type of
the radio.
standard(1) - Standard, this is the default
setting currently defined in the
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.2 |
| cd11IfPreambleType This object specifies the current radio preamble
type in use by the station. Possible values:
long(1) - long preambles
short(2) - short preambles.
A long pream… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.3 |
| cd11IfPhyBasicRateSet This attribute specifies if a data rate in the
dot11OperationalRateSet of the IEEE802dot11-MIB
is a Basic Rate for this radio interface.
If a data rate is a Basic Rate, the cor… | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.5 |
| cd11IfPhyMacSpecification This object specifies which IEEE 802.11 Standard
applies to this radio interface.
ieee802dot11a(1) - IEEE 802.11a Standard,
ieee802dot11b(2) - IEEE 802.11b Standard,
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.6 |
| cd11IfPhyConcatenation If the value of cd11IfStationRole is 'roleBridge'
or 'roleNrBridge', this object sets the maximum
packet concatenation size in bytes for all
outbound packets. For our current … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.7 |
| cd11IfPhyNativePowerUseStandard This object indicates if queries for current
transmit power and number of transmit power levels
of the radio for the frequency band shall be via
the Standard IEEE802dot11-MIB do… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.8 |