cd11IfPhyMacSpecification
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.2.1.1.6
Object
column
Enumeration
This object specifies which IEEE 802.11 Standard
applies to this radio interface.
ieee802dot11a(1) - IEEE 802.11a Standard,
ieee802dot11b(2) - IEEE 802.11b Standard,
ieee802dot11g(3) - IEEE 802.11g Standard.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.2.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cd11IfPhyOperationEntry
- Table
- cd11IfPhyOperationTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ieee802dot11a |
2 | ieee802dot11b |
3 | ieee802dot11g |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfCurrentCarrierSet This object defines the carrier set of the radio.
The carrier set implies a regulatory domain, but
geographic-specific restrictions within a regulatory
domain may necessitate se… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.1 |
| cd11IfModulationType This object specifies the RF modulation type of
the radio.
standard(1) - Standard, this is the default
setting currently defined in the
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.2 |
| cd11IfPreambleType This object specifies the current radio preamble
type in use by the station. Possible values:
long(1) - long preambles
short(2) - short preambles.
A long pream… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.3 |
| cd11IfDomainCapabilitySet This object specifies the current multi-domain
capability setting of this radio. This object
takes one of the dot11MultiDomainCapabilityIndex
values on the dot11MultiDomainCapabi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.4 |
| cd11IfPhyBasicRateSet This attribute specifies if a data rate in the
dot11OperationalRateSet of the IEEE802dot11-MIB
is a Basic Rate for this radio interface.
If a data rate is a Basic Rate, the cor… | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.5 |
| cd11IfPhyConcatenation If the value of cd11IfStationRole is 'roleBridge'
or 'roleNrBridge', this object sets the maximum
packet concatenation size in bytes for all
outbound packets. For our current … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.7 |
| cd11IfPhyNativePowerUseStandard This object indicates if queries for current
transmit power and number of transmit power levels
of the radio for the frequency band shall be via
the Standard IEEE802dot11-MIB do… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.8 |