cd11IfVlanSecurityRowStatus
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.1.10.1.7
Object
This is used to create a new row, modify or
delete an existing VLAN encryption configuration
in this table.
Creation of rows must be done via 'createAndGo' and
cd11IfVlanSecurityVlanEnabled and
cd11IfVlanSecurityCiphers columns are mandatory.
This object will become 'active' if the NMS performs
a multivarbind set including this object and
successfully creates the encryption configuration.
Modification and deletion of rows can be done via
'createAndGo' and 'delete' respectively when this
object is 'active'. Any encryption configurations
of a VLAN should only be deleted when it is not
being used for any client association.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.1.10.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cd11IfVlanSecurityEntry
- Table
- cd11IfVlanSecurityTable
- Siblings
- 11
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfVlanSecurityVlanId This is the VLAN ID (1-4095) to which the
parameters in each conceptual row shall be
applied. If the value is '0', these parameters
apply to the non-VLAN configuration. | column | CDot11IfVlanIdOrZero | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.1 |
| cd11IfVlanWepEncryptMic If cd11IfVlanEncryptionMode is wep(2) and
this object is 'true', MIC will be performed
on all data frames on this VLAN. Otherwise,
no MIC will be done. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.10 |
| cd11IfVlanWepEncryptKeyHashing If cd11IfVlanEncryptionMode is wep(2) and
this object is 'true', key hashing will be
used for encryption. Otherwise, no key
hashing will be done. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.11 |
| cd11IfVlanPsPacketForwardEnable If both cd11IfVlanSecurityVlanEnabled and this
object are 'true', PSPF is enabled on VLAN
cd11IfVlanSecurityVlanId of this radio interface
and direct traffic between wireless c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.12 |
| cd11IfVlanSecurityVlanEnabled If the value is 'true', this VLAN sub-interface is
enabled on all trunk and hybrid ports. If the value
is 'false', this VLAN is disabled on all ports. For
platforms supporting… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.2 |
| cd11IfVlanBcastKeyChangeInterval This is the broadcast key rotation period. If the
value is '0', there is no key rotation. | column | Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.3 |
| cd11IfVlanBcastKeyCapabilChange If it is 'true', a new key will be used every time
when the common set of encryption capability among
clients of this radio on this VLAN is changed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.4 |
| cd11IfVlanBcastKeyClientLeave If it is 'true', a new key will be used every time
when a client of the radio on this VLAN disassociates. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.5 |
| cd11IfVlanSecurityCiphers If cd11IfVlanEncryptionMode is cipher(1), these
are all the possible cipher type combinations
currently supported for data frame encryption from
different IEEE 802.11 radio interf… | column | CDot11IfCipherType | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.6 |
| cd11IfVlanEncryptionMode Encryption mode this VLANs are:
cipher(1) - WPA and Cisco encryptions,
wep(2) - WEP Only encryption | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.8 |
| cd11IfVlanWepEncryptOptions If cd11IfVlanEncryptionMode is wep(2),
mandatory(1) - WEP encryption is mandatory,
optional(2) - WEP encryption is option.
for all data frames on this VLAN. | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.9 |