cd11IfVlanSecurityVlanEnabled
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.1.10.1.2
Object
If the value is 'true', this VLAN sub-interface is enabled on all trunk and hybrid ports. If the value is 'false', this VLAN is disabled on all ports. For platforms supporting NMS to create VLAN sub-interfaces, setting this object to 'true' will create the corresponding VLAN sub-interfaces on all ports and 'false' will remove the the corresponding VLAN.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.1.10.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cd11IfVlanSecurityEntry
- Table
- cd11IfVlanSecurityTable
- Siblings
- 11
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfVlanSecurityVlanId This is the VLAN ID (1-4095) to which the
parameters in each conceptual row shall be
applied. If the value is '0', these parameters
apply to the non-VLAN configuration. | column | CDot11IfVlanIdOrZero | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.1 |
| cd11IfVlanWepEncryptMic If cd11IfVlanEncryptionMode is wep(2) and
this object is 'true', MIC will be performed
on all data frames on this VLAN. Otherwise,
no MIC will be done. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.10 |
| cd11IfVlanWepEncryptKeyHashing If cd11IfVlanEncryptionMode is wep(2) and
this object is 'true', key hashing will be
used for encryption. Otherwise, no key
hashing will be done. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.11 |
| cd11IfVlanPsPacketForwardEnable If both cd11IfVlanSecurityVlanEnabled and this
object are 'true', PSPF is enabled on VLAN
cd11IfVlanSecurityVlanId of this radio interface
and direct traffic between wireless c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.12 |
| cd11IfVlanBcastKeyChangeInterval This is the broadcast key rotation period. If the
value is '0', there is no key rotation. | column | Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.3 |
| cd11IfVlanBcastKeyCapabilChange If it is 'true', a new key will be used every time
when the common set of encryption capability among
clients of this radio on this VLAN is changed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.4 |
| cd11IfVlanBcastKeyClientLeave If it is 'true', a new key will be used every time
when a client of the radio on this VLAN disassociates. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.5 |
| cd11IfVlanSecurityCiphers If cd11IfVlanEncryptionMode is cipher(1), these
are all the possible cipher type combinations
currently supported for data frame encryption from
different IEEE 802.11 radio interf… | column | CDot11IfCipherType | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.6 |
| cd11IfVlanSecurityRowStatus This is used to create a new row, modify or
delete an existing VLAN encryption configuration
in this table.
Creation of rows must be done via 'createAndGo' and
cd1… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.7 |
| cd11IfVlanEncryptionMode Encryption mode this VLANs are:
cipher(1) - WPA and Cisco encryptions,
wep(2) - WEP Only encryption | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.8 |
| cd11IfVlanWepEncryptOptions If cd11IfVlanEncryptionMode is wep(2),
mandatory(1) - WEP encryption is mandatory,
optional(2) - WEP encryption is option.
for all data frames on this VLAN. | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.10.1.9 |