cd11IfFrequencyBandTable
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.2.15
Object
table
This table identifies the radio frequency
(sub)bands supported on the IEEE 802.11 radio
interfaces while operating per the regulations
imposed by the cd11IfCurrentCarrierSet.
This table has an expansion dependent relationship
on the ifTable. For each entry in this table,
there exists at least an entry in the ifTable of
ifType ieee80211(71). This table uses the
cd11IfRfFrequencyBand as the expansion index.
All entries in this table are created or deleted
only by the agent.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.2.15- Type
- table
- Status
- current
- Parent
- cd11IfPhyConfig
- Siblings
- 10
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfPhyOperationTable This table contains the IEEE 802.11 Physical
Layer operation configuration parameters for
each radio interface. This table has a sparse
dependent relationship on the ifTable.
… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.1 |
| cd11IfSuppDataRatesPrivacyTable This table defines the transmit and receive bit
rate of the radio on each IEEE 802.11 interface
and the WEP encryption support at those rates.
This table has an expansion depend… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.11 |
| cd11IfChanSelectTable This table specifies for each 802.11 channel,
whether the scanning process controlled by the
cd11IfPhyDsssChannelAutoEnable can select a
particular channel for use. This table… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.12 |
| cd11IfClientTxPowerTable This table shows the recommended client
transmit power level for the radio and selects
one of the levels as the desired transmit power
level to be used by the client of the radi… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.13 |
| cd11IfErpOfdmTxPowerTable This table shows the available ERP-OFDM
transmit power levels for radios implementing
IEEE 802.11g Protocol and configures one of the
levels as the transmit power level.
… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.14 |
| cd11IfNativeTxPowerSupportTable This table shows the transmit powers supported for
all the radio frequency bands on the IEEE 802.11
radios.
This table has an expansion dependent relationship
on the … | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.16 |
| cd11IfRfNativePowerTable This table configures the radio power settings
for frequency bands supported on the IEEE 802.11
radios. This table serves as an alternative for
the IEEE802dot11-MIB dot11PhyTxP… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.17 |
| cd11IfDataRatesSensitivityTable This table specifies the receive sensitivity
specifications of IEEE 802.11 radio interfaces.
This table has an expansion dependent relationship
on the ifTable. For e… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.18 |
| cd11IfPhyFhssTable This table contains the Physical Layer
Frequency Hopping Spread Spectrum configuration
parameters for each radio interface. This table
has a sparse dependent relationship on th… | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.4 |
| cd11IfPhyDsssTable This table contains the Physical Layer
Direct Sequence Spread Spectrum configuration
parameters for each radio interface. This table
has a sparse dependent relationship on the … | table | - | .1.3.6.1.4.1.9.9.272.1.1.2.5 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfFrequencyBandEntry Each entry defines a supported radio frequency
band for an IEEE 802.11 radio interface. | row | - | .1.3.6.1.4.1.9.9.272.1.1.2.15.1 |