cd11IfPhyFhssMaxCompatibleRate

CISCO-DOT11-IF-MIB · .1.3.6.1.4.1.9.9.272.1.1.2.4.1.1
Commands MIB view Table view

Object

column r/w 500 Kb per secondInteger32 
This object specifies the of maximum data 
rate at which the station may transmit data.  
The octet contains a value representing a rate.   
The rate should be within the range from '2' to 
'127', corresponding to data rates in increments
of 500 kb/s from 1 Mb/s to 63.5 Mb/s.  It should be 
one of the rates in the IEEE802dot11-MIB
dot11OperationalRateSet.  The default value is 
'127'.

Context

MIB
CISCO-DOT11-IF-MIB
OID
.1.3.6.1.4.1.9.9.272.1.1.2.4.1.1
Type
column
Access
readwrite
Status
current
Units
500 Kb per second
Parent
cd11IfPhyFhssEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DOT11-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DOT11-IF-MIB::cd11IfPhyFhssMaxCompatibleRate'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-DOT11-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DOT11-IF-MIB::cd11IfPhyFhssMaxCompatibleRate.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-DOT11-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-DOT11-IF-MIB::cd11IfPhyFhssMaxCompatibleRate'

Syntax

500 Kb per secondInteger32

Values & Constraints

Object Constraints
range: 2-127

Conformance

Member of
cd11IfPhyConfigGroup cd11IfPhyConfigGroupRev1
Compliance refinements
ciscoDot11IfComplianceRev1
This object is only mandatory for devices
supporting Frequency-Hopping Spread Spectrum.
ciscoDot11IfComplianceRev2
This object is only mandatory for devices
supporting Frequency-Hopping Spread Spectrum.
ciscoDot11IfComplianceRev3
This object is only mandatory for devices
supporting Frequency-Hopping Spread Spectrum.
ciscoDot11IfComplianceRev4
This object is only mandatory for devices
supporting Frequency-Hopping Spread Spectrum.