cd11IfPhyNativePowerUseStandard
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.2.1.1.8
Object
This object indicates if queries for current
transmit power and number of transmit power levels
of the radio for the frequency band shall be via
the Standard IEEE802dot11-MIB dot11PhyTxPowerTable
dot11CurrentTxPowerLevel and
dot11NumberSupportedPowerLevels objects or
corresponding cd11IfNativeCurrentPowerLevel
and cd11IfNativeNumberPowerLevels objects
in the cd11IfRfNativePowerTable.
If the value is 'true', the dot11CurrentTxPowerLevel
is used to configure the current radio transmit
power level. If the value is 'false', the
cd11IfNativeCurrentPowerLevel object shall be used
to configure the current radio transmit power level.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cd11IfPhyOperationEntry
- Table
- cd11IfPhyOperationTable
- Siblings
- 7
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfCurrentCarrierSet This object defines the carrier set of the radio.
The carrier set implies a regulatory domain, but
geographic-specific restrictions within a regulatory
domain may necessitate se… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.1 |
| cd11IfModulationType This object specifies the RF modulation type of
the radio.
standard(1) - Standard, this is the default
setting currently defined in the
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.2 |
| cd11IfPreambleType This object specifies the current radio preamble
type in use by the station. Possible values:
long(1) - long preambles
short(2) - short preambles.
A long pream… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.3 |
| cd11IfDomainCapabilitySet This object specifies the current multi-domain
capability setting of this radio. This object
takes one of the dot11MultiDomainCapabilityIndex
values on the dot11MultiDomainCapabi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.4 |
| cd11IfPhyBasicRateSet This attribute specifies if a data rate in the
dot11OperationalRateSet of the IEEE802dot11-MIB
is a Basic Rate for this radio interface.
If a data rate is a Basic Rate, the cor… | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.5 |
| cd11IfPhyMacSpecification This object specifies which IEEE 802.11 Standard
applies to this radio interface.
ieee802dot11a(1) - IEEE 802.11a Standard,
ieee802dot11b(2) - IEEE 802.11b Standard,
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.6 |
| cd11IfPhyConcatenation If the value of cd11IfStationRole is 'roleBridge'
or 'roleNrBridge', this object sets the maximum
packet concatenation size in bytes for all
outbound packets. For our current … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.272.1.1.2.1.1.7 |